Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > Performance Modifications
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 11-13-2008, 08:32 PM   #1
turboyaris
 
Drives: 2007 Yaris Sedan
Join Date: Jan 2007
Location: Southern New Jersey
Posts: 459
Send a message via AIM to turboyaris
harness bar help

Hey guys, I was looking into building you guys a harness bar for both the sedan and liftback. I need a little help though, as I no longer have a Yaris of my own. I need some pictures of the seat belt bolt areas, both the upper and lower where they attach to car. Also, I need the measurement from the upper seat belt bolts. I need the measurement from pillar to pillar. Also too if you guys could give me an idea of how far back behind the upper seatbelt bolt that your seats go. That way I can design the harness bar with enough room so that you can sit in a comfortable position for you. Thanks for the help guys. Also, If I could find someone in the South Jersey/ philly area so I can mock one of these up, that would be very helpful.
turboyaris is offline   Reply With Quote
Old 11-14-2008, 02:27 PM   #2
Never Enough
 
Never Enough's Avatar
 
Drives: Jbody
Join Date: Oct 2008
Location: Grant, MI
Posts: 44
That would be great! Keep everyone updated.
Never Enough is offline   Reply With Quote
Old 11-14-2008, 05:25 PM   #3
turboyaris
 
Drives: 2007 Yaris Sedan
Join Date: Jan 2007
Location: Southern New Jersey
Posts: 459
Send a message via AIM to turboyaris
well... i'm still waiting for someone to give me measurements... I can have these ready by the end of next week, but I need to get these measurements, and then I need to find someone with a yaris in my area, so I can make sure everything bolts up. These would be made out of chromoly and they would be 1 1/2" tubing to allow for the many camcorder mounts to work with the harness bar. I may also eventually make my own camcorder mounts if there is a demand for them.
I also need to know if there is a difference in width of the sedan and liftback, hopefully there is not, so that the product will work universally on both.
turboyaris is offline   Reply With Quote
Old 11-14-2008, 05:53 PM   #4
Benggolf2
 
Benggolf2's Avatar
 
Drives: 2008 Yaris RS 4-Door LB
Join Date: Oct 2008
Location: Richmond, B.C., Canada
Posts: 504
Turboyaris, wouldn't it be simplier if you visited a Toyota dealer nearby instead so you can accurately take the necessary measurements?
Just a suggestion, no pun intended.
__________________
Benggolf2
Benggolf2 is offline   Reply With Quote
Old 11-14-2008, 06:10 PM   #5
cali yaris
ULTIMATE
 
cali yaris's Avatar
 
Drives: 07 Yaris Turbo
Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
Send a message via AIM to cali yaris
I'm working on it -- you asked me yesterday!
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.
cali yaris is offline   Reply With Quote
Old 11-14-2008, 06:16 PM   #6
turboyaris
 
Drives: 2007 Yaris Sedan
Join Date: Jan 2007
Location: Southern New Jersey
Posts: 459
Send a message via AIM to turboyaris
haha i tried that, i went to the same one that I bought mine from and they were too busy to bother I suppose, anyways for right now I'm designing the brackets and I need to know the bolt size for the upper and lower seat belt bolts... I couldn't quite figure that out.
turboyaris is offline   Reply With Quote
Old 11-14-2008, 06:30 PM   #7
ddongbap
Banned
 
Drives: yw calls me douche and racist.
Join Date: Aug 2007
Location: hay
Posts: 2,183
Would you really trust anyone else's measurement, other than Garms?
ddongbap is offline   Reply With Quote
Old 11-14-2008, 06:38 PM   #8
cali yaris
ULTIMATE
 
cali yaris's Avatar
 
Drives: 07 Yaris Turbo
Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
Send a message via AIM to cali yaris
jkuchta gives good measurements
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.
cali yaris is offline   Reply With Quote
Old 11-14-2008, 08:51 PM   #9
Never Enough
 
Never Enough's Avatar
 
Drives: Jbody
Join Date: Oct 2008
Location: Grant, MI
Posts: 44
Good luck guys!
Never Enough is offline   Reply With Quote
Old 11-14-2008, 11:05 PM   #10
TEHxFALLEN V1.2
Banned
 
TEHxFALLEN V1.2's Avatar
 
Drives: '08 Lexus IS-F
Join Date: Oct 2008
Location: Calabasas, CA
Posts: 1,890
Send a message via AIM to TEHxFALLEN V1.2
I really need a harness bar!!!!! AHHHHHHH!!
__________________
DON'T LIKE ME? TAKE A SEAT WITH THE REST OF THE BITCHES WHO ARE WAITING FOR ME TO GIVE A FUCK.

Sponsored by: Micro Image
http://microimageonline.com
TEHxFALLEN V1.2 is offline   Reply With Quote
Old 11-14-2008, 11:37 PM   #11
jkuchta
 
Drives: 2007 Yaris hatch (red)
Join Date: Sep 2007
Location: L.A.
Posts: 557
I'll try and get something together tomorrow night after work for you
jkuchta is offline   Reply With Quote
Old 11-15-2008, 12:05 PM   #12
turboyaris
 
Drives: 2007 Yaris Sedan
Join Date: Jan 2007
Location: Southern New Jersey
Posts: 459
Send a message via AIM to turboyaris
thanks man, the big thing I need right now, is the size of the bolts for the seatbelts, that way I can have the flanges made.... the harness bar itself will need to be made with a car in front of me, just in case haha, plus then like everyone said, I will have my own measurements which are all the measurements I need.
turboyaris is offline   Reply With Quote
Old 11-15-2008, 12:38 PM   #13
cali yaris
ULTIMATE
 
cali yaris's Avatar
 
Drives: 07 Yaris Turbo
Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
Send a message via AIM to cali yaris
K, I will pull a bolt and go match it for you today... M-something, LOL
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.
cali yaris is offline   Reply With Quote
Old 11-15-2008, 06:46 PM   #14
jkuchta
 
Drives: 2007 Yaris hatch (red)
Join Date: Sep 2007
Location: L.A.
Posts: 557
I wanna say M10x1.5....I'll pull one tonight.
jkuchta is offline   Reply With Quote
Old 11-15-2008, 07:11 PM   #15
dngz
 
dngz's Avatar
 
Drives: black yaris sedan
Join Date: Jun 2006
Location: vancouver
Posts: 475
awesome! i'm 100% interested in getting one for my sedan!
dngz is offline   Reply With Quote
Old 11-15-2008, 09:55 PM   #16
jkuchta
 
Drives: 2007 Yaris hatch (red)
Join Date: Sep 2007
Location: L.A.
Posts: 557
Can't find my bolt gauge, but the head size on all of the seatbelt bolts is 14mm. I think that equates to a M10 size bolt, though I can't say for sure.
jkuchta is offline   Reply With Quote
Old 11-16-2008, 10:56 PM   #17
whooppee777
I used to have 1700 posts
 
whooppee777's Avatar
 
Drives: 2008 Yaris Hatch
Join Date: Apr 2007
Location: Maryland
Posts: 808
Send a message via AIM to whooppee777
i wouldnt mind one of these
__________________
First Boosted Yaris On The East Coast

whooppee777 is offline   Reply With Quote
Old 11-17-2008, 04:57 PM   #18
turboyaris
 
Drives: 2007 Yaris Sedan
Join Date: Jan 2007
Location: Southern New Jersey
Posts: 459
Send a message via AIM to turboyaris
anyone get a chance to pull out those two seat belt bolts and measure them? apparently yaris owners in jersey are lame... no one wants to help me out with this haha :P
turboyaris is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
radio wire colors & alarm wire color reference guide battleversiontc In Car Entertainment + Electronics (audio / video / alarm) 43 06-06-2023 02:12 PM
DIY (08' USDM Liftback): ESUSE Fog Light Install v2.0 goku87 DIY / Maintenance / Service 127 02-19-2023 07:01 PM
Tanabe Front Strut Bar Benggolf2 Performance Modifications 57 08-15-2014 02:41 AM
How exactly does an heavier duty harness work? IsLNdbOi Performance Modifications 5 09-26-2006 04:19 AM
c one motorsport performance bars badhabitz Performance Modifications 17 08-23-2006 10:31 PM


All times are GMT -4. The time now is 09:25 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.