New To The Forum

[CAyaris]

Hey guys My name is alex and me and my girlfriend share a 2008 toyota yaris sedan. Currently only work we have done to it is the interrior trim pieces and door trim pannels were painted white, interrior has full neon on the floor front and back, pink lights inside at that, white underglow on the out side, 17" Motegi racing R7 rims, two kicker comp subwoofers in a custom enclosure fit to the back of the trunk and a kenwood amp. On the night picture you can currently see the side underglow, its due to the bracket got slammed on by accident and knowcked it loose i will get an updated picture to show that its not able to be seen. Got to keep it clean.

http://i149.photobucket.com/albums/s54/s10bmx/NIGHTLIGHTRIMS.jpg

http://i149.photobucket.com/albums/s54/s10bmx/DAYLIGHTRIMS.jpg

http://i149.photobucket.com/albums/s54/s10bmx/4.jpg

http://i149.photobucket.com/albums/s54/s10bmx/Photo0187.jpg

Had stock wheels in the last two pictures, was sitting a little higher than usual also.

[cali yaris]

looks good, love the wheels on that color. :smile:

[Betrivent]

^^ way too much wheel gap though. You need to drop that thing on those wheels. Who was it that was asking what 17s look like on a stock suspension yaris? :P

[Shinare]

Pics of interior too!

[big lo]

Welcome to the forum, good looking pics, some springs would make it look a lot better and take pics of the interior show it off, I got stock fog lights FS if interested

[CAyaris]

Thanks for the welcome. We are looking at springs, although i heard u cant do more than a two inch drop. True???? as far as interior goes, let me get it cleaned up a bit and than get some pictures up.

[Revsson]

Welcome to the forum!

[big lo]

Thanks for the welcome. We are looking at springs, although i heard u cant do more than a two inch drop. True???? as far as interior goes, let me get it cleaned up a bit and than get some pictures up.

If you are looking for a low drop then Tein will be the best you can also try the Microimageonline.com store for the MI springs, on my ride I got Teins its pretty low just check my album, be good.

[CAyaris]

How Low can You go on a sedan, if im on a 17" rim with a 215/40/17 tire

[big lo]

That all depends on the product, and the conditions in your area, oh and last but not least how much you are willing to pay. Since you got 17's from 2.5 in but all depends in what you buy, shop around and see what is good for you, good luck

[CAyaris]

Conditions: Nothing i live in a desert. LOL
Price looking to pay: 100.00-200.00

[falker]

looks good you should check out this club called teamaftermath haha
its kevinmetal btw

[Kaotic Lazagna]

How Low can You go on a sedan, if im on a 17" rim with a 215/40/17 tire

The Tein S.Tech is your best bet for your budget. Depending on the offset of your rims, you might rub.

I'm on S.Tech's, and when I use my 17x7.5 rims (+38 in the front and +28 in the rear) with 205/40/17 tires (generic tires that are more like 215/40/17), I had horrible rubbing. I rolled my rear fender and trimmed the front fender liner to minimize rubbing.

Here's my car with that set up (I also installed some spring spacers in the rear to raise it probably a 1/4", but also prevents the spring from compressing all the way since these pics):

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0088.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0089.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0103.jpg

And before rolling the rear fender:
http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0002.jpg

[matthewai]

dont know if this helps but mines on the mi springs they were a good price but i just have stock steelys ive had no problems though

[CAyaris]

Where are you guys picking your stuff up from. I have guys that can help me out and have done stuff like this before but i havent talked to them in a while. How much work is involved in doing a 3.5 or 3 inch drop we want to be slammed.lol. and than where do u think we can get an S lip kit from

[matthewai]

i got bassically all my parts from microimage good stuff good prices fast shipping. id say it took us about 2-3 hours to put in my springs but my friend has his own bay at mercedes so we had a lift and spring compressor and all that it was just a spring swap we didnt do any fender work or rolling of the fenders that may be required for a bigger drop like some of these other guys said so that might add on some time never looked for a s kit but im sure they are relatively easy to find

[CAyaris]

Hmmmm ok thanks i will have to look around. Yeah their is a guy in one of the near by clubs that does air bags im sure he can do springs. By the way here are some random pictures. The thing hanging off the back of the car is a pink flamingo and my buddy has an xb with a fish, just somehting random and funny soo.... the last picutre is just oc the car while i was washing and detailing it.

http://i149.photobucket.com/albums/s54/s10bmx/MingoFar.jpg

http://i149.photobucket.com/albums/s54/s10bmx/MingoClose.jpg

http://i149.photobucket.com/albums/s54/s10bmx/WetCar.jpg

[CAyaris]

Microimage seems to be the only place to pick up yaris stuff?

[matthewai]

hah nice at least its not a set of balls hanging i hate that stupid shit aha
i mean mi just has only yaris parts u might be able to shop around for specific parts on other sites its just mi has almost everything u would want all in one place ya know

[CAyaris]

Yeah that is true. Thanks for the help and to responding. And yeah i hate those to. The flamingo is funny i think and draws attetion. it makes more scence cause the interior has pink inside due to my girls work on the car lol. I will have pictures up in a little while of interior just need to get home and take pictures. What do you guys know about wrapping headliners? Not to hard? and sorry about all the questions but its hard to find a group that actually knows what they are talking about

[CAyaris]

Opinion, what color rims on my blue yaris

[Kaotic Lazagna]

Microimage seems to be the only place to pick up yaris stuff?

Yes, Micro Image would be your best bet. Great customer service and all. However, Garm is not the only person that sells Yaris stuff. You can find parts online, but I'm willing to bet that their customer service isn't as good as Garm's.


I bought a good majority of my parts before Garm became a vendor, but those stores/vendors have long since left or went out of business.

[Kaotic Lazagna]

Opinion, what color rims on my blue yaris

Keep your existing rims, they look good.

[Kaotic Lazagna]

Also, you won't find any springs within your price range that will drop your car 3-3.5" as there are none. lol. Only way to achieve a drop that low is to cut some lowering springs, which I do NOT recommend.

[matthewai]

yeah deff do not cut any springs ull hear a loud "bong" sound when u hit any bump

[cali yaris]

Thanks for the support, guys. We are not the only provider for Yaris parts, but we do have exclusive offerings and "everything under one roof" for the car. And yes, I try to provide the best knowledgable service anywhere.

You could get a 3" drop with coilovers and by removing the height adjustment perches. That's about as low as you can go.

[Kaotic Lazagna]

Thanks for the support, guys. We are not the only provider for Yaris parts, but we do have exclusive offerings and "everything under one roof" for the car. And yes, I try to provide the best knowledgable service anywhere.

You could get a 3" drop with coilovers and by removing the height adjustment perches. That's about as low as you can go.

Don't think he's going to find any coilovers that's within his price range :tongue:

[cali yaris]

^ Just saying it's possible and how to do it. :tongue:

[Kaotic Lazagna]

^ Just saying it's possible and how to do it. :tongue:

:tongue::laugh:

[CAyaris]

Ha yeah Coilovers for 100-200 lol doesnt even happen on blackfriday ahhah. Thanks for thehelp guys. Garm??? Thats the owner of Microimage

[Kaotic Lazagna]

Ha yeah Coilovers for 100-200 lol doesnt even happen on blackfriday ahhah. Thanks for thehelp guys. Garm??? Thats the owner of Microimage

Yes, Garm is the owner of Micro Image. Like I said, best bet would be the S.Tech's. It'll lower you about 2.1".

[CAyaris]

how many inches are you lowered again, and yeah thats what im thinking about i just want to eliminate the wheel spacing

[Kaotic Lazagna]

how many inches are you lowered again, and yeah thats what im thinking about i just want to eliminate the wheel spacing

I'm running the S.Tech's, so I'm ~2.1" dropped. But like I said earlier, I installed some spring spacers/lifters in the rear.

[CAyaris]

Yeah i like your drop i jsut wish i could se it on my car before i buy it. cause i like your car but done tyou have a lip kit. Cause we dont?

[Kaotic Lazagna]

Yeah i like your drop i jsut wish i could se it on my car before i buy it. cause i like your car but done tyou have a lip kit. Cause we dont?

If you have PhotoShop, or have a pic of your car for my to chop, you/I can see how your car will look like with the kind of drop.

Yes, I have the factory S lip kit. You can always add a lip kit down the line. There are tons to choose from, having access to them is the difficult part.

[CAyaris]

Idont have a photshop but ill tae a day time photo monday before the car goes into the shop for a tire aliighnmnet ballance and to transfer the scensors if u can photoshop it that wold be cool and. yeah i cant find any lip kits maybe im not looking hard enough

[Kaotic Lazagna]

Idont have a photshop but ill tae a day time photo monday before the car goes into the shop for a tire aliighnmnet ballance and to transfer the scensors if u can photoshop it that wold be cool and. yeah i cant find any lip kits maybe im not looking hard enough

Yeah, I'll photoshop it for you.

It's harder to find lip kits here in the US. They're all in other countries. The Philippines has tons of lip kits. However, shipping is going to cost $$$

http://www.viosunderground.com/modules/smf/index.php/topic,812.0.html

[CAyaris]

More pictures the first to of are a custom fiberglass subwoofer box im making in the picture it is on its second layer of bondo along with a resin undercoat and four sheets of fiberglass/kitty whisker. Getting reasdy for paint tomarrow. Primer YAY. The last picture of the trunk is when i was prepping it for full sound deadener.

http://i149.photobucket.com/albums/s54/s10bmx/New2.jpg

http://i149.photobucket.com/albums/s54/s10bmx/New1.jpg

http://i149.photobucket.com/albums/s54/s10bmx/new3.jpg

This box will be paintted white but i need some one to paint some fraphics on it any ideas on people. The box wont be in for long figuriing how i want to make a larger custom fit one,

[CAyaris]

Yeah, I'll photoshop it for you.

It's harder to find lip kits here in the US. They're all in other countries. The Philippines has tons of lip kits. However, shipping is going to cost $$$

http://www.viosunderground.com/modules/smf/index.php/topic,812.0.html

Are you just going to use one of my posted pictures or did you need me to tae a new one

[CAyaris]

Painted the rear speaker grills, seat locks, and brake light cover the other day.
http://i149.photobucket.com/albums/s54/s10bmx/REAR.jpg

[CAyaris]

Flowers are not my choice my girl decided to thow them in their...

[Kaotic Lazagna]

Are you just going to use one of my posted pictures or did you need me to tae a new one

Can you take a new, more clear one for me? Your choice if you want it to be side profile or a 3/4 corner shot.

[CAyaris]

Hey kaotic ill try and get u a picture tonight. My girls got the car at school right now.

Bad news: Had an impact break appear on our rear right tire yesterday and ended up needing to replace it just to be safe. We have been riding on it though for about 4 days. Either way we now have all of our tire sensors in our new wheels, and are all ballanced

[Kaotic Lazagna]

Hey kaotic ill try and get u a picture tonight. My girls got the car at school right now.

Bad news: Had an impact break appear on our rear right tire yesterday and ended up needing to replace it just to be safe. We have been riding on it though for about 4 days. Either way we now have all of our tire sensors in our new wheels, and are all ballanced

Okay, I'll chop it when I see it.

[CAyaris]

Kaotic: not to sure if these picstures will work for you but if not ill take them during the day where i actully and have light and will or can use a camera not my phone lol.

Anyways though just a few pictures from the other night after leaving the movies decided to park and pic.:cool:

http://i149.photobucket.com/albums/s54/s10bmx/untitled.jpg

http://i149.photobucket.com/albums/s54/s10bmx/untitled1.jpg

http://i149.photobucket.com/albums/s54/s10bmx/2-1.jpg

[Kaotic Lazagna]

Won't work since the pics are too small.

[CAyaris]

ok ill get u a large one

[CAyaris]

Decided to put some deadener in the trunk yesterday first picture is just of the trunk stripped down and with some deadener second picture is of the whole entire tunk laying on the floor of my garage lol. and the last picture is where the question is. What is the black vent looking thing on the left hand side of the third picture?

http://i149.photobucket.com/albums/s54/s10bmx/Day1.jpg

http://i149.photobucket.com/albums/s54/s10bmx/day2.jpg

http://i149.photobucket.com/albums/s54/s10bmx/day3.jpg

[CAyaris]

???

[WeeYari]

???

PM the owner of this thread http://www.yarisworld.com/forums/showthread.php?t=26150

He's sound deadened everything a may be able to answer. I've not got a sedan, so wouldn't have a clue.

[CAyaris]

I am the owner of this thread lol thats why i put it up i just dont know what the balck vent is that is in the trunk if its not importaint than im removing it and sealing it

[CAyaris]

Being printed, picking up tonight sticker going on car tonight or tomarrow

http://i149.photobucket.com/albums/s54/s10bmx/Photo03951.jpg

[33OH]

I am the owner of this thread lol thats why i put it up i just dont know what the balck vent is that is in the trunk if its not importaint than im removing it and sealing it

He said the owner of THIS thread: http://www.yarisworld.com/forums/showthread.php?t=26150. The one right here: http://www.yarisworld.com/forums/showthread.php?t=26150. http://www.yarisworld.com/forums/showthread.php?t=26150 http://www.yarisworld.com/forums/showthread.php?t=26150 http://www.yarisworld.com/forums/showthread.php?t=26150 http://www.yarisworld.com/forums/showthread.php?t=26150.

:biggrin:

[CAyaris]

Oh lol i thought he ment this one as in the 08 yaris one like mine didnt read it all the way

[WeeYari]

didnt read it all the way
:rolleyes:

It looks like whatever it is, derickveliz2 left it open.

[CAyaris]

Got the new sticker up. Thanks to American Made RideShop In Goodyear AZ.
http://i149.photobucket.com/albums/s54/s10bmx/jap.jpg
http://i149.photobucket.com/albums/s54/s10bmx/jap1.jpg

[CAyaris]

What do you think?

[matthewai]

i like the flowers and that sticker is sweet

[CAyaris]

ha the flowers are not my choice

[CAyaris]

I need some opinions. First of all all the tan in the car is leaving. We are wrapping the A, B, and C pillars in loui Vouton Fabric(True Fabric). The fabric is all white. Should We than wrap the roof and rear deck pannel(the one with the rear speakers in it) in a White head liner fabric or black. We are planning on changing the whole interior fabric on the seats to black with pink stictchin and the interior has all pink lights.
Next Opinion needed is the dash, the top half is black and the bottom half is tan. We were originally thinking of having the bottom half painted black to math the top. Although the moe i look i think white might look good. So than it would be white bottom half of dash white pillars and white door inserts, along with the white on the exterior. Im just trying to figure ways of flowing the white though out the car.

What are you guys thinking. like i said just looking for opinions.

[Shinare]

Nice, what does that say exactly? I {heart} Yaris?

[CAyaris]

Nice, what does that say exactly? I {heart} Yaris?

YEAH

[CAyaris]

Can i get some advice on removing the headliner in my 08 yaris sedan. I know you need to remove the A, B, C, pillars, but how, and what else needs to come out. Also how do i remove the seats(the front seats)? Help

[big lo]

I need some opinions. First of all all the tan in the car is leaving. We are wrapping the A, B, and C pillars in loui Vouton Fabric(True Fabric). The fabric is all white. Should We than wrap the roof and rear deck pannel(the one with the rear speakers in it) in a White head liner fabric or black. We are planning on changing the whole interior fabric on the seats to black with pink stictchin and the interior has all pink lights.
Next Opinion needed is the dash, the top half is black and the bottom half is tan. We were originally thinking of having the bottom half painted black to math the top. Although the moe i look i think white might look good. So than it would be white bottom half of dash white pillars and white door inserts, along with the white on the exterior. Im just trying to figure ways of flowing the white though out the car.

What are you guys thinking. like i said just looking for opinions.
Have you thought about CF to wrap them parts?

[big lo]

I forgot to add the sticker looks cool ass hell, different and original

[Kaotic Lazagna]

Can i get some advice on removing the headliner in my 08 yaris sedan. I know you need to remove the A, B, C, pillars, but how, and what else needs to come out. Also how do i remove the seats(the front seats)? Help

Everything you need to know should be in here somewhere: http://etimago.com/yaris/repairmanual/

[CAyaris]

Have you thought about CF to wrap them parts?

Yeah i haven thought about CF but we are trying to do more white in the car

[CAyaris]

Kaotic do you happen to know where i could find a spoiler.

[jekqmb]

To fast to furious

[CAyaris]

Wait What lol

[CAyaris]

Update:
Just ordered Dolche and Cabana Black fabric(going to be wrapped where the fabric is already on the doors and also going to wrap the A, B, and C pillars in it), Also order 100 Pink 10,000 Mcd Led's. We are Replacing all the interior Led lights witht hese new ones. Need mor brightness and light. Also Update on Fiberglass subwoofer box; just finished the primer, roughed the primer and it is looking great, i start the actual top layer of paint tomarrow. Than after paint their will be a wet sand and than followed by a mural painted on some of the box.

Update on previous Paint gun Post: I did end up getting a Paint gun. A HVLP gun just an off brand one but from a couple guys words in a few of the shops aroudn her it is a good for for the price. start building the paint booth in the back yard tomarrow:thumbup:

Car work will be a little quiet on the forum for the nexxt few weeks while we wait for orders to show up.

If anyone has any ideas on cheap things to do to the car give me some ideas i need something to do to relieve this stress of waiting lol. Ideas???

[CAyaris]

Update:
Fabric was ordered the 28th of january and is suppose to show up this monday. Special order was suppose to only be 7 days but the place on on vacation. I ordered from a website called www.Urbansell.com They did work witht he hold up well though they are sending two yards of gucci ribbon for free along with my original order of Dolche and gabana.
Lights we ordered 100 of and they are 10000 Mcd our current ones are only 2000 so they were not bright enough we will be doing around 15 under the drivers side dash and passanger side dash, that alsoaround 20 under each seat and than we are not to sure what to do with the rest. The lights were also ordered the 28th and were shipped on the 5th, coming from Japan, nothing more JDM than that lol. They should be here the 16th.
Led holders also ordered 100 of and those were ordered today and arive on monday.
All will be installed ASAP, and pictures will be posted along with updates.

??Question being that i need advice when wrapping the ABC, and also the door fabric pannels. Not removal but tips for actually wrapping them.

[CAyaris]

So went to first show and competed in it today. it was import faceoff in tuscon az. drove 120 miles one way to it with a car club out here 17 of us. Came to be the only yaris their. Didnt get any awards but our club got best display and partisipation

[ilikerice]

congrats!

[cali yaris]

^ which club?

[CAyaris]

Team Aftermath

[CAyaris]

Hey this is random but is a camber kti somehting that can be adjusted around so that im not riding a full camber all the time i really just want it for shows

[ilikerice]

you could.. the front camber bolts are easy to adjust.. honestly, i havent messed with the rear shim type camber yet.. i have them, just havent needed to use them yet.

you can do some research on the "ball and string" alignment method.. alot of guys at tracks use this method still. it really not that difficult

[CAyaris]

Whats it running on price.

[ilikerice]

microimage.com has them.

http://shop.microimageonline.com/Miscellaneous_c23.htm

fairly cheap.. the bolts and the rear shims

[CAyaris]

http://i149.photobucket.com/albums/s54/s10bmx/DSC_2615.jpg
Picture from show

[CAyaris]

Recent mods...
http://i149.photobucket.com/albums/s54/s10bmx/dg4.jpg
Factory tow hook
http://i149.photobucket.com/albums/s54/s10bmx/dg3.jpg
http://i149.photobucket.com/albums/s54/s10bmx/dg2.jpg
http://i149.photobucket.com/albums/s54/s10bmx/dg1.jpg
http://i149.photobucket.com/albums/s54/s10bmx/dg.jpg

[JumpmanYaris]

Hey I got a nice bronze tow hook and realy lite 35$ shipped

[SAV912]

Like the D&G wrap for the pillars and boot, that looks legit. Tow hook looks silly though. Never understood that "mod". Oh, and do those wheels justice and get dropped ASAP! Even TRDs or something. The Megan Racing coilovers are suppose to be good too.

-SAV :drinking:

[CAyaris]

Like the D&G wrap for the pillars and boot, that looks legit. Tow hook looks silly though. Never understood that "mod". Oh, and do those wheels justice and get dropped ASAP! Even TRDs or something. The Megan Racing coilovers are suppose to be good too.

-SAV :drinking:

Ha just went out and got Trd's as u said that for cheap but we ae trading them for Sprints in a month But its about to be LOW

[CAyaris]

So finally its lowed thanks to Willy for the install and Russel for the springs! Its on Trd Xb Springs. :win: :win: :win:
http://i149.photobucket.com/albums/s54/s10bmx/Photo0512.jpg
http://i149.photobucket.com/albums/s54/s10bmx/Photo0513-1.jpg

And last the Flamingo has almost ...... landed :lol:
http://i149.photobucket.com/albums/s54/s10bmx/Photo0514-1.jpg