HELP! MI retrofit install problems! - Toyota Yaris Forums

xxae07xx · 10-27-2010, 12:10 AM

i wired everything up and got everything where i though it goes and i guess it works...for the most part anyways. driver side works perfectly, but passenger will only shine brights and the halo doesnt work. im not sure what to do. ive checked everything fuses wiring etc, unplugged and replugged.... theres only one way to wire the projector is there not? and halo is spliced into ddl, red to green and black to white/black. anyone???

jamal1984 · 10-27-2010, 08:53 AM

Quote:

Originally Posted by xxae07xx

i wired everything up and got everything where i though it goes and i guess it works...for the most part anyways. driver side works perfectly, but passenger will only shine brights and the halo doesnt work. im not sure what to do. ive checked everything fuses wiring etc, unplugged and replugged.... theres only one way to wire the projector is there not? and halo is spliced into ddl, red to green and black to white/black. anyone???

i ran into this problem before, it's ended up is the harness relay is bad, if you just bought it, return the harness and get a new one.
Those harness is not cheap either

marcus · 10-27-2010, 11:14 AM

is it possible that the halo is out.

xxae07xx · 10-27-2010, 12:24 PM

The halo is the least of my concerns. I'm primarily focused on why my projector will only shine bright and no low beam period.If it is the harness I wonder if MI would be willing to send me a replacement.

jamal1984 · 10-27-2010, 12:33 PM

Quote:

Originally Posted by xxae07xx

The halo is the least of my concerns. I'm primarily focused on why my projector will only shine bright and no low beam period.If it is the harness I wonder if MI would be willing to send me a replacement.

then the halo wires is not correct right that is why you don't get low beam.
It's possible it's your harness, but if the halo wires not connected right, then halo and low beam will not working.

Good Luck

10-27-2010, 12:10 AM	#1
xxae07xx hook em View User's Garage Drives: black 08 lb Join Date: Nov 2008 Location: houston Posts: 87	HELP! MI retrofit install problems! i wired everything up and got everything where i though it goes and i guess it works...for the most part anyways. driver side works perfectly, but passenger will only shine brights and the halo doesnt work. im not sure what to do. ive checked everything fuses wiring etc, unplugged and replugged.... theres only one way to wire the projector is there not? and halo is spliced into ddl, red to green and black to white/black. anyone???

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zage Turbo Kit Install - Toyota Yaris	Focus_Sh1ft	Forced Induction Forum	160	02-06-2022 09:14 PM
Compilation of Yaris How-tos/DIYs	YarisBueller	DIY / Maintenance / Service	39	04-28-2018 09:47 AM
))) Tein Super Compact coilover install tips (((	aucorium	DIY / Maintenance / Service	4	10-25-2011 01:42 AM
HELP needed for carputer project: Powered USB hub install	Astroman	In Car Entertainment + Electronics (audio / video / alarm)	15	11-01-2010 06:18 PM
Micro Image underpanel install DIY	cali yaris	DIY / Maintenance / Service	27	08-29-2009 10:48 PM

10-27-2010, 11:14 AM	#3
marcus toyota View User's Garage Drives: 2007 Yaris RS Blazed Join Date: Oct 2006 Location: toronto, canada Posts: 3,637	is it possible that the halo is out.

10-27-2010, 12:24 PM	#4
xxae07xx hook em View User's Garage Drives: black 08 lb Join Date: Nov 2008 Location: houston Posts: 87	The halo is the least of my concerns. I'm primarily focused on why my projector will only shine bright and no low beam period.If it is the harness I wonder if MI would be willing to send me a replacement.