![]() |
![]()
![]() |
![]() |
#1 |
![]() ![]() ![]() Drives: jdm yaris sedan Join Date: Feb 2009
Location: bayamon puerto rico
Posts: 433
|
fuel pressure regulator
can i put this fuel pressure regulator ????
if so how? and at how much pressure if i have my mods ![]()
__________________
vvti bregao! |
![]() |
![]() |
![]() |
#2 |
![]() ![]() ![]() ![]() Drives: Yaris LB Turbo Join Date: Aug 2006
Location: Miami FL
Posts: 782
|
Our cars have a returnless fuel system, the factory regulator is in the tank, if you convert the fuel system to a return line then yes you can use it, but this mod is unnecessary, start with you basic I/H/E mods first
|
![]() |
![]() |
![]() |
#3 |
![]() ![]() ![]() Drives: jdm yaris sedan Join Date: Feb 2009
Location: bayamon puerto rico
Posts: 433
|
i have those mods
__________________
vvti bregao! |
![]() |
![]() |
![]() |
#4 |
![]() ![]() ![]() ![]() |
then your done!
__________________
![]() |
![]() |
![]() |
![]() |
#5 |
![]() ![]() Drives: Vios Join Date: Oct 2008
Location: Brunei
Posts: 82
|
piggyback for more power
|
![]() |
![]() |
![]() |
#6 |
Learn to Relax
Drives: 2007, Meteorite, LB Join Date: Dec 2008
Location: Anaheim, CA
Posts: 2,070
|
|
![]() |
![]() |
![]() |
#7 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
maybe we can start over with a list of existing mods? That would be helpful if you want advice.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
![]() |
![]() |
![]() |
#8 |
Slowy getting there
|
|
![]() |
![]() |
![]() |
#9 |
![]() Drives: 2008 Toyota Yaris (black) Join Date: Jul 2010
Location: San Antonio, TX
Posts: 14
|
![]()
Hi, I was trying to put on my new filter and everything and just found out that it's really difficult to transfer the fuel pressure regulator to the new one. I can't hammer it in because I already bent the regulator slightly, do you think I can still salvage it? How can you safely press it (regulator) inside the fuel filter because it's pretty darn stubborn? Does anyone have any experience in installing fuel pressure regulators in fuel filters. Of course, mine is the returnless type I'm talking about. My car is a 2008 Toyota Yaris Hatchback. Any help provided is greatly appreciated. I'm stumped I hope I don't have to buy a new fuel pressure regulator after I tried to hammer it in
![]() |
![]() |
![]() |
![]() |
#10 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
If it is hard to get in it is the wrong one. They fit snugly, but not that snugly.
__________________
![]() |
![]() |
![]() |
![]() |
#11 |
![]() Drives: 2008 Toyota Yaris (black) Join Date: Jul 2010
Location: San Antonio, TX
Posts: 14
|
Fuel Pressure Regulator
![]() Last edited by ectoman; 03-21-2015 at 12:24 PM. Reason: incomplete post |
![]() |
![]() |
![]() |
#12 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
I would have to look at one to refresh my memory about the plastic ring, but the little I-ring on the tip is the key. You are supposed to lube it with a bit of gasoline to insert it. If memory serves me right the metal lip sits flush with the housing.
__________________
![]() |
![]() |
![]() |
![]() |
#13 |
![]() Drives: 2008 Toyota Yaris (black) Join Date: Jul 2010
Location: San Antonio, TX
Posts: 14
|
Okay I'll try using gasoline to insert the regulator - yes and you are right I do remember the lip flush against the filter housing sir. Thank you again for selflessly replying and sharing knowledge!
|
![]() |
![]() |
![]() |
#14 |
![]() Drives: 2008 Toyota Yaris (black) Join Date: Jul 2010
Location: San Antonio, TX
Posts: 14
|
![]()
I attempted insertion of the regulator after immersing it in gasoline so as to lubricate it upon entry but I tried hammering it in with a rubber mallet then it started to become crooked after whacking it a few times so I abandoned that method and just can't figure a safe and careful way to PRESS it in. Please somebody out there help me, I'm dejected and don't want to give up putting this thing in I know there has to be a way. Can you help me CT Scott or do you know of a sure fire way to get this piece in? I'm frustrated, anyone please help!
![]() |
![]() |
![]() |
![]() |
#15 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
I have two fuel sender sets sitting on the shelf in my office and I just pulled out the regulators (had to pry them to get them started), and pushed them back in, just using the palm of my hand.
__________________
![]() |
|
![]() |
![]() |
![]() |
#16 |
![]() Drives: 2008 Toyota Yaris (black) Join Date: Jul 2010
Location: San Antonio, TX
Posts: 14
|
Fuel Pressure Regulator Installation
I even tried putting the regulator into the original fuel filter and still had difficulty fully seating the regulator and could not do it, it would almost seat up to the last plastic washer and just stay stuck there. I also checked to make sure that both O-rings and the plastic rings are properly arranged on the regulator, and they are.
![]() |
![]() |
![]() |
![]() |
#17 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Is the filter OEM or aftermarket?
__________________
![]() |
![]() |
![]() |
![]() |
#18 |
![]() Drives: 2008 Toyota Yaris (black) Join Date: Jul 2010
Location: San Antonio, TX
Posts: 14
|
![]()
Hi CT Scott I actually ended up getting the regulator on, due to my idiocy I had a small plastic collar right below the first O-ring and it didn't belong there so once I removed it, it went right in! I can't believe I was forcing it on there and just found out that that was the reason. The plastic was misplaced by me and I found out that it actually went as a guide on the top of the old fuel pump port that inserted into the top of the fuel filter. I just also seated the black plastic tube, but I didn't use the hot water method it didn't work; instead I used a lighter flame to it for about 6 seconds then hurriedly pushed it onto that nipple and I got it on 90% percent of the way but I think it will be good now. I just have to reassemble everything and pray I didn't damage anything in the process of reassembly.
![]() Last edited by ectoman; 03-23-2015 at 10:26 AM. Reason: Unfinished comment |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Yaris Fuel Pump | HTM Yaris | General Yaris / Vitz Discussion | 12 | 03-22-2012 03:34 AM |
Fuel Pressure Regulators and setting meters? | Nagoya_TRD. | Forced Induction Forum | 21 | 05-15-2009 11:14 AM |
screw more psi in the tires. | thebarber | Fuel Economy Forum | 43 | 05-04-2009 04:46 PM |
Any body have good data on the Yaris fuel system? | LtNoogie | Performance Modifications | 9 | 03-26-2009 08:01 AM |
The Advantages of Nitrous on an Engine | KCALB SIRAY | Performance Modifications | 7 | 01-02-2009 10:53 AM |