Are 13s possible with a 1nZ-Fe - Toyota Yaris Forums

crazylegs · 02-16-2016, 03:02 PM

Cold Air Intake
1zz-fe TB
1zz-fe manifold
Cams
Header
full exhaust
sticky rubber
80 shot of nitrous direct port

im thinking on an ATX you'd still be lucky to break into the 14s, but what about an MTX assuming your a good driver

Thirty-Nine · 02-17-2016, 12:32 PM

Not a chance.

The Micro Image Yaris was running 12.80s at 107 with a fully built engine and turbo making like 300+ hp. Bolt-ons, cam, and nitrous will likely get you into the low 15s if I were to guess if you were a good driver.

https://www.youtube.com/watch?v=HszS1X-wD6Q

crazylegs · 02-17-2016, 07:36 PM

yeah thats what i figured. i just went and picked up a mx-3 with a klze swap as my next project car and i'll just keep the yaris as my daily driver.

Dragonslayer182 · 02-17-2016, 08:57 PM

https://www.youtube.com/watch?v=bHkZP2e8se8

crazylegs · 02-17-2016, 10:10 PM

yeah that has pistons and rods done does it not. i know you can break into the 12s with a built bottom end and the boost or spray. but i was just curious about the above mod list which might get you 110-120whp N/A and 190-200whp on the bottle. i think that should break into the 13s with an MTX driven by a good driver. the power to weight ratio is there that's for sure. i'm just going to keep it a bone stock daily driver until i have to do something to the bottom end then we will see.

02-16-2016, 03:02 PM	#1
crazylegs Drives: 2007 Yaris Join Date: Aug 2014 Location: Winnipeg, canada Posts: 59	Are 13s possible with a 1nZ-Fe Cold Air Intake 1zz-fe TB 1zz-fe manifold Cams Header full exhaust sticky rubber 80 shot of nitrous direct port im thinking on an ATX you'd still be lucky to break into the 14s, but what about an MTX assuming your a good driver Last edited by crazylegs; 02-16-2016 at 07:44 PM.

02-17-2016, 12:32 PM	#2
Thirty-Nine Small cars are a big deal View User's Garage Drives: 2007 Yaris Liftback Join Date: Feb 2006 Location: Portland, OR Posts: 3,144	Not a chance. The Micro Image Yaris was running 12.80s at 107 with a fully built engine and turbo making like 300+ hp. Bolt-ons, cam, and nitrous will likely get you into the low 15s if I were to guess if you were a good driver. https://www.youtube.com/watch?v=HszS1X-wD6Q __________________ Subcompact Culture: The Small car blog

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1nz Disassembly & Reassembly.	EchoLaQua	Forced Induction Forum	0	06-19-2015 11:17 AM
pittsburgh 13's	djhuddy2442	Tracking, Racing, Auto-X Forum	0	10-29-2014 09:05 AM
The Toyota 1NZ Enthusiast's Garage on Facebook	fnkngrv	Off-topic / Other Cars / Everything else Discussions	3	04-07-2014 01:55 PM
1NZ / 2NZ Transmission Compatibility & Aftermarket 2NZ Rods	jtw11	Performance Modifications	8	09-03-2013 01:49 PM
1NZ port & polish	ChinoCharles	Performance Modifications	75	06-01-2009 06:39 PM

02-17-2016, 07:36 PM	#3
crazylegs Drives: 2007 Yaris Join Date: Aug 2014 Location: Winnipeg, canada Posts: 59	yeah thats what i figured. i just went and picked up a mx-3 with a klze swap as my next project car and i'll just keep the yaris as my daily driver.

02-17-2016, 08:57 PM	#4
Dragonslayer182 Teal Squealer View User's Garage Drives: 07 Yaris Sedan Join Date: Jul 2015 Location: West Tennessee Posts: 42	https://www.youtube.com/watch?v=bHkZP2e8se8

02-17-2016, 10:10 PM	#5
crazylegs Drives: 2007 Yaris Join Date: Aug 2014 Location: Winnipeg, canada Posts: 59	yeah that has pistons and rods done does it not. i know you can break into the 12s with a built bottom end and the boost or spray. but i was just curious about the above mod list which might get you 110-120whp N/A and 190-200whp on the bottle. i think that should break into the 13s with an MTX driven by a good driver. the power to weight ratio is there that's for sure. i'm just going to keep it a bone stock daily driver until i have to do something to the bottom end then we will see.