 |
 |
|
|
01-12-2009, 01:20 PM
|
#1 |
 
Drives: Scion tC Join Date: Nov 2008
Location: Glendora, CA
Posts: 12
|
Pioneer Avic-D3 VSS wire problem
So, I just installed an Avic-D3 on my girlfriends 09 Yaris-S, tapped the vss wire to the purple wire via instructions found here on yarisworld.... but, there is no signal coming through. Is it differenent on the 09? I would assume not, but I'm willing to try anything at this point.
Used this for reference:  Any suggestions? |
|
|
|
01-21-2009, 03:57 AM
|
#2 |
|
Drives: Scion tC Join Date: Nov 2008
Location: Glendora, CA
Posts: 12
|
Any help?
|
|
|
|
|
01-21-2009, 08:39 AM
|
#3 |
|
vroom vroom
Drives: lil red 5-door Join Date: Sep 2006
Location: Bangkok, Thailand
Posts: 7,744
    |
I'm not sure myself, really... What I do know is that between 07 and 08 the tach wires changed color from green to orange, so it is possible the VSS as well. If you can't match the wire color, maybe try looking up the actual pin location, that should remain the same.
__________________
The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson  Bye bye 1NZ... |
|
|
|
|
01-21-2009, 09:49 AM
|
#4 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
The easiest place to grab VSS is at the TPWS connector (behind the lower passenger glove box)
TPWS location:  VSS wire location: 
|
|
|
|
|
02-12-2009, 02:03 PM
|
#5 |
|
Drives: Scion tC Join Date: Nov 2008
Location: Glendora, CA
Posts: 12
|
perfect! thank you for that, i'll try it out!
|
|
|
|
|
08-16-2010, 06:30 PM
|
#6 |
|
TRD TURBO
Drives: TRD VITZ TURBO 2003 Join Date: Aug 2010
Location: Mauritius
Posts: 7
|
i need help plz... i drive a vitz trd turbo 2003. ive installed a pioneer vdp and i need a speed signal wire for the vdp to work. any1 can help?
|
|
|
|
 |
|
|
Linear Mode
