Is there a top mount manifold? - Toyota Yaris Forums

Nexus1155 · 09-11-2010, 02:19 AM

Has anyone has ever seen one before? I've seen it on a couple of scions, I don't know about the yaris if any turbo would fit up vs. the down position. Is it a clearance issue, or it is just not a manufactured manifold.

Just wondering, not looking to make one, i feel it would be easier to position everything with the piping this way.

Thanks

Focus_Sh1ft · 09-11-2010, 12:18 PM

I'd be surprised if we ever saw one tbh. Clearance would definitely be an issue, and there's no way you could retain the AC lines.

I also disagree on it making the piping easier. I think the only situation where the piping would be easier with a top mount is if you were using a top mount intercooler or no intercooler at all.

Nexus1155 · 09-11-2010, 12:28 PM

I was actually planning on the top mount, her hood is messed up as it is, front end needs to be redone, so cutting a hole and painting it would be alright. shorter piping, less pressure drop.

I found a turbo already, I may just go and grab a mani from Garm while hes pricematching.. Seems like the best bet i beleive if there is no top mount. I was just looking at previous builds and saw how a couple were top mount but i beleive those were all custom made manis.

cdydjded · 09-11-2010, 02:08 PM

Yes its possible & no the A/C lines would not have to be touched. When I started designing my kit I started with a top mount. I changed it to bottom mount because the downpipe on the top mount is more difficult to make that the bottom mount.

pimp my yaris · 09-14-2010, 04:54 PM

This XB kit was 4 sale on e-BAY. I was originally thinking about it 4 my car. Then I opened my hood and saw the A/C line location and I was not ready to give up A/C. Also I dont now how high the turbo would stick up above the valve cover. The windsheild wiper tray is only a few inches above the motor. The XB has more room. Also I have not seen anyone going top mount with the newer us/canadian Yaris. You could be the first

Nexus1155 · 09-14-2010, 06:40 PM

LOL im not looking to make any ground breaking discoveries, I have two K03 turbos left over which should be perfect, just the fact of getting a manifold and hacking it up hurts me, seems like a waste of $250 if im going to cut the old flange off and put a new one on, might as well rig up my own if Garm or someone sells just the manifold flange.

I lost the bid on a GT25 the other day, I want something quick and easy to install. Obviously im going to install the engine management unit first, test that out without complications so I know I can mess with it once everything else is installed as well.

09-11-2010, 02:19 AM	#1
Nexus1155 Bathroom + Laptop = <3 Drives: Audi Join Date: Aug 2006 Location: Dorchester Posts: 1,009	Is there a top mount manifold? Has anyone has ever seen one before? I've seen it on a couple of scions, I don't know about the yaris if any turbo would fit up vs. the down position. Is it a clearance issue, or it is just not a manufactured manifold. Just wondering, not looking to make one, i feel it would be easier to position everything with the piping this way. Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zage Turbo Kit Install - Toyota Yaris	Focus_Sh1ft	Forced Induction Forum	160	02-06-2022 09:14 PM
Top mount or front mount intercooler	vitz rs	Forced Induction Forum	10	09-14-2010 06:31 AM
DIY Cellphone Car mount	Arkhangel	DIY / Maintenance / Service	3	08-24-2010 04:37 PM
DIY Camera Mount -- No Cost Version	KCALB SIRAY	DIY / Maintenance / Service	20	06-08-2009 04:12 PM
swap for 2zz-ge????	yarisTOONR82	Performance Modifications	12	03-23-2007 08:15 PM

09-11-2010, 12:18 PM	#2
Focus_Sh1ft Drives: 08 Yaris Turbo; 06 tC Turbo Join Date: Jan 2010 Location: New Jersey Posts: 875	I'd be surprised if we ever saw one tbh. Clearance would definitely be an issue, and there's no way you could retain the AC lines. I also disagree on it making the piping easier. I think the only situation where the piping would be easier with a top mount is if you were using a top mount intercooler or no intercooler at all.

09-11-2010, 12:28 PM	#3
Nexus1155 Bathroom + Laptop = <3 Drives: Audi Join Date: Aug 2006 Location: Dorchester Posts: 1,009	I was actually planning on the top mount, her hood is messed up as it is, front end needs to be redone, so cutting a hole and painting it would be alright. shorter piping, less pressure drop. I found a turbo already, I may just go and grab a mani from Garm while hes pricematching.. Seems like the best bet i beleive if there is no top mount. I was just looking at previous builds and saw how a couple were top mount but i beleive those were all custom made manis.

09-11-2010, 02:08 PM	#4
cdydjded Drives: Yaris LB Turbo Join Date: Aug 2006 Location: Miami FL Posts: 782	Yes its possible & no the A/C lines would not have to be touched. When I started designing my kit I started with a top mount. I changed it to bottom mount because the downpipe on the top mount is more difficult to make that the bottom mount.

09-14-2010, 06:40 PM	#6
Nexus1155 Bathroom + Laptop = <3 Drives: Audi Join Date: Aug 2006 Location: Dorchester Posts: 1,009	LOL im not looking to make any ground breaking discoveries, I have two K03 turbos left over which should be perfect, just the fact of getting a manifold and hacking it up hurts me, seems like a waste of $250 if im going to cut the old flange off and put a new one on, might as well rig up my own if Garm or someone sells just the manifold flange. I lost the bid on a GT25 the other day, I want something quick and easy to install. Obviously im going to install the engine management unit first, test that out without complications so I know I can mess with it once everything else is installed as well.