more s/c help - Toyota Yaris Forums

thebarber · 03-27-2011, 07:57 PM

what is the size of nut used for the tensioner pulley on the blitz s/c?

long story short, the nut came off today and i'm having trouble finding the right size

MUSKOKA800 · 03-27-2011, 09:27 PM

The nut in the centre of the pulley?
Just happen to have a box full of Blitz 10' from here.
As best I can measure assembled the threaded stud/axle is 10mm with the wrench size for the nut being 14mm.
Hope that helps.

Bluevitz-rs · 03-28-2011, 02:34 AM

Did you break it already? LOL

thebarber · 03-28-2011, 11:22 AM

Quote:

Originally Posted by Bluevitz-rs

Did you break it already? LOL

not broken, im just missing a part now, lol

thanks for the info, muskoka

thebarber · 03-28-2011, 11:57 PM

ok, so i was also missing the spacer...

and after about a half dozen trips to the parts source (which is luckily right around the corner from my house) i got some 12mm washers for spacers (x5) a 12mm lock washer on the back and a 10mm 1.25 thread flanged nut w/ a 10mm lock nut on the front

its all back together and is running well, though i havent driven it. just idle in the driveway w/ a couple throttle blips to make sure the s/c was running...

03-27-2011, 07:57 PM	#1
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	more s/c help what is the size of nut used for the tensioner pulley on the blitz s/c? long story short, the nut came off today and i'm having trouble finding the right size __________________

03-27-2011, 09:27 PM	#2
MUSKOKA800 Drives: Scion FRS RS2, ‘21 Crosstrek Join Date: Oct 2008 Location: Chatham, Ontario, Canada Posts: 1,729	The nut in the centre of the pulley? Just happen to have a box full of Blitz 10' from here. As best I can measure assembled the threaded stud/axle is 10mm with the wrench size for the nut being 14mm. Hope that helps. __________________ TRD Upgrades: 18" Wheels wrapped in 215/35/18 PZero's, Sportivo Shocks/Struts, Lowering Springs, Swaybar, Axle-Back Exhaust, Oil Cap, Rad Cap, Signage. Aftermarket Goodies: Piggies SS, K&N Drop-In, Blitz S/C, DC Header, NST Pulley) Toyota Options/Accessories: Sport Pedal Covers, Sport Shift Knob, Ipod Interface, Summer Mats, Winter Mats, Cruise Control, Auto-Dim Mirror, Echo steelies with winter boots.

03-28-2011, 11:57 PM	#5
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	ok, so i was also missing the spacer... and after about a half dozen trips to the parts source (which is luckily right around the corner from my house) i got some 12mm washers for spacers (x5) a 12mm lock washer on the back and a 10mm 1.25 thread flanged nut w/ a 10mm lock nut on the front its all back together and is running well, though i havent driven it. just idle in the driveway w/ a couple throttle blips to make sure the s/c was running... __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blitz s/c question	siulung100	Forced Induction Forum	3	04-08-2010 10:22 PM
Blitz S/C a rebuilt and rebaged Toyota S/C?	Yaris0609	Forced Induction Forum	3	03-13-2010 01:21 AM
old article about blitz s/c but interesting info..	AdeJong 03	Forced Induction Forum	4	09-18-2009 03:08 PM
fixed my blitz s/c problem for now	laszlo	Forced Induction Forum	3	04-19-2009 11:24 PM
Blitz S/C on 08 Yaris	whooppee777	Forced Induction Forum	12	11-26-2008 02:45 PM

03-28-2011, 02:34 AM	#3
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	Did you break it already? LOL