|
04-15-2009, 12:33 PM | #1 |
Drives: . Join Date: Apr 2007
Location: .
Posts: 1,828
|
More Cold air
Just wanted to see if you guys thought this would be a good idea. I don't know how familiar some you guys are with the 96-00 Civics(ex-honda guy). But i remember seeing a few Civics running around here in MD with 3 inch holes drilled right into there front bumpers. This hole sat a few inches from where the CAI filter was located. It was far enough to still draw in more cold air but still kept it safe from the elements. What do you guys think good idea or no. I was just thinking about it. I highlighted the area i was thinking about in the yaris. I currently have a AFE intake the hole would sit right under the filter. Just want to get some opinions
|
04-15-2009, 12:37 PM | #2 |
Banned
Drives: yw calls me douche and racist. Join Date: Aug 2007
Location: hay
Posts: 2,183
|
In my ABSOLUTE honest opinion, a stock engine isn't going to make great use of the colder air.
|
04-15-2009, 12:39 PM | #3 |
Drives: . Join Date: Apr 2007
Location: .
Posts: 1,828
|
Hmmmmmm yeah i guess your right.
|
04-15-2009, 01:18 PM | #4 |
Drives: yaris Join Date: Oct 2008
Location: amerika
Posts: 258
|
for me to cut a whole 3 inches wide in my front bumper itd have to be something that gave me at least 30hp. If it was a civic id do it, but its more than that, its a yaris. But yes in theory it would deliver more cold air, but you wouldnt notice a diffrence. so dont lol
__________________
ballin on a budget. |
04-15-2009, 01:20 PM | #5 |
Banned
Drives: 2007 4 Door Yaris Join Date: Jan 2009
Location: Southern California
Posts: 1,357
|
Why not do the DIY fog light cover to air intake/brake vent conversion? Effective and you don't have to cut a whole in your bumper
http://www.yarisworld.com/forums/showthread.php?t=8333 |
04-15-2009, 01:20 PM | #6 |
vroom vroom
Drives: lil red 5-door Join Date: Sep 2006
Location: Bangkok, Thailand
Posts: 7,744
|
lil scoop on the hood to ram some air in there could do it too
__________________
The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ... |
04-15-2009, 01:23 PM | #7 |
Drives: . Join Date: Apr 2007
Location: .
Posts: 1,828
|
people relax..... ok i won't do it, just wanted to get some opinions. also these civics were N/A monsters with crazy mods done. The brake duct things sound cool but i want fog lights
|
04-15-2009, 01:23 PM | #8 |
Drives: . Join Date: Apr 2007
Location: .
Posts: 1,828
|
|
04-15-2009, 02:03 PM | #9 |
Drives: 2007 MX5 Join Date: Feb 2009
Location: Miami, Fl.
Posts: 338
|
I'm open to holes in the front bumper....a lot of miata guys do it....I'll probably do it at some point. Guys with 350Z's do it also. Granted the increase will most likely be unnoticable. But an increase is an increase. Especially in a car that just about puts 90hp to the ground.
|
04-15-2009, 02:06 PM | #10 |
Not even 90hp to the ground. :)
|
|
04-15-2009, 02:07 PM | #11 |
Drives: 2008 yaris, stripped, red Join Date: Jan 2009
Location: SE Texas
Posts: 977
|
y not jsut remove the headlight? i'm assuming u take this to the track?
|
04-15-2009, 02:08 PM | #12 |
Drives: 2007 MX5 Join Date: Feb 2009
Location: Miami, Fl.
Posts: 338
|
More like 80?
|
04-15-2009, 02:31 PM | #13 |
__________________
EVERYBODY EVENTUALLY COMES BACK TO YARISWORLD...... |
|
04-15-2009, 02:56 PM | #14 |
Drives: . Join Date: Apr 2007
Location: .
Posts: 1,828
|
|
04-15-2009, 03:45 PM | #15 |
Drives: 07 metmet LB Join Date: Oct 2008
Location: VA Beach
Posts: 648
|
wouldn't you rather have -1 HP than a big hole in your bumper?
__________________
F5 CAI, MR axleback, MR Header, NST SSK. Full Exhaust wrap, AT3 Custom SSK Konig Heliums 15x6.5 Black Tanabe Df210's |
04-15-2009, 04:03 PM | #16 |
Drives: . Join Date: Apr 2007
Location: .
Posts: 1,828
|
The whole would only 2-3 inches across. some people don't mind it
|
04-15-2009, 04:17 PM | #17 |
Drives: 07 metmet LB Join Date: Oct 2008
Location: VA Beach
Posts: 648
|
huh...well more power to you, keep us posted. At least its original! (for the yarii anyway)
__________________
F5 CAI, MR axleback, MR Header, NST SSK. Full Exhaust wrap, AT3 Custom SSK Konig Heliums 15x6.5 Black Tanabe Df210's |
04-15-2009, 04:33 PM | #18 |
Drives: 2008 Yaris sedan A/T Join Date: Oct 2008
Location: Costa mesa, California
Posts: 353
|
I've seen some cars they put several round hole on the rear bumper
__________________
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
AEM cold air intake vs Afe intake... | djgab101 | Performance Modifications | 69 | 04-28-2013 02:03 PM |
Simota Carbon Charger Cold Air Intake | lilredrocket | Performance Modifications | 18 | 04-13-2009 03:16 AM |
Intake Systems Decision Maker.. | Blenjar | Performance Modifications | 25 | 09-15-2007 10:07 PM |
guess what I'm waiting for and how much I paid? | Ric n Sov's Vitz RS | General Yaris / Vitz Discussion | 27 | 06-27-2007 07:36 PM |
Cold Air Intake vs. Short Ram Intake | nevermorez | Performance Modifications | 1 | 01-24-2007 04:25 PM |