JDMAUTOLIGHTS

[ACKING_QC]

anyone actually ordered tail llights from them ? I see the website has a lot of sort of JDM lights for our cars but i don't think this website is legit......... any1 help ??

http://jdmautolights.com/tail-lights...81d31170803cb6

[ACKING_QC]

really ?? no one can answer me ??

[Kalispel]

I've seen that site up for years, but haven't ordered anything from them because all they sell are 2nd Gen Yaris accessories.

[ACKING_QC]

Originally Posted by Kalispel

I've seen that site up for years, but haven't ordered anything from them because all they sell are 2nd Gen Yaris accessories.

and a shit ton of stuff for other cars.... I just want to know if the site is reliable because I need a replacement ASAP (one holding screw broke on left tail light... and water comes in the car...)

[SirDigby]

pay with paypal/credit card and you are covered up to $2000. don't be scared. i've almost ordered them a few times, but ended up finding them for cheaper on ebay one day...

[ACKING_QC]

Originally Posted by SirDigby

pay with paypal/credit card and you are covered up to $2000. don't be scared. i've almost ordered them a few times, but ended up finding them for cheaper on ebay one day...

all I want is JDM looking tails lights ... I don't care if they aren't OEM in fact, I'd appreciate if they are Replicas with PROPER north american plugs

[SirDigby]

you just swap 2 wires. it's no big deal...

[ACKING_QC]

uh? I heard you had to remove the connector and redo the total sh!t ?

[SirDigby]

no. i believe you are just changing the position of the turn signal and reverse light. i might be wrong on the wire functions.
the connectors are the same. you only have to replace the connector if you damage it. if you using a simple terminal tool, or even a pick or a safety pin, you can remove the wires without damage to the connector and swap their positions. the connector is the same shape regardless of USDM/JDM/CDM/EDM/AusDM/AisaDM etc.

[WeeYari]

Originally Posted by SirDigby

no. i believe you are just changing the position of the turn signal and reverse light. i might be wrong on the wire functions.

Correct.



Sent from my Elite_5_5_Octa using Tapatalk

[SirDigby]

Originally Posted by SirDigby

the connectors are the same. you only have to replace the connector if you damage it. if you using a simple terminal tool, or even a pick or a safety pin, you can remove the wires without damage to the connector and swap their positions. the connector is the same shape regardless of USDM/JDM/CDM/EDM/AusDM/AisaDM etc.

ok. i am wrong. there are different connectors. maybe it is the 09 and up that are all the same. the JDM is square, where as the USDM is a long rectangle, at least for 06-08. i'm sorry for any confusion...

[ACKING_QC]

well.... in that case I need to find a pair... for yesterday... I have water infiltration in my car and both my back seat AND @feet level of my back seat are suffering from this... I don't wnat my car to rust to death with all this water soo I need em' now... that's why I made the post on JDMAUTOLIGHTS.... but if you have another place that is WAY CHEAPER ... used or not i don't care... as long as no more water enters my car ..........

[SirDigby]

i got mine on ebay. otherwise i was going to order them from jdmautolights

[ACKING_QC]

Originally Posted by SirDigby

i got mine on ebay. otherwise i was going to order them from jdmautolights

spotted a pair.. 411$ CA...

on JDMAuto I can have a set of ambre red ones for 235$.. problem is, I DFK if the website is legit.. I guess someones gotta sacrifice itself... I'll wait for my next paycheck to test that and see if I got them :)

[WeeYari]

Originally Posted by ACKING_QC

I DFK if the website is legit.. I guess someones gotta sacrifice itself...

Why the f**k do you keep chirping about the site being legit or not? It is.

Keep in mind that of the 8 products listed in your link a few post back, only 1 is actual OEM Toyota. The other 7 are replicas, and hence subject to inherent replica fitment issues.

[ACKING_QC]

Originally Posted by WeeYari

Why the f**k do you keep chirping about the site being legit or not? It is.

Keep in mind that of the 8 products listed in your link a few post back, only 1 is actual OEM Toyota. The other 7 are replicas, and hence subject to inherent replica fitment issues.

HEY! not everyone has 400$ to put up on tail lights and can going away with STILL some money on their pocket ... it is normal to have some doubts about a thing NO ONE ever talked about on this forum......

[WeeYari]

I've been on hand for a couple of replica installs over the years and I don't recall needing to do a pin swap on the connectors. OEM RS lights yes need wiring changes, replica no.

Sent from my Elite_5_5_Octa using Tapatalk

[ACKING_QC]

Originally Posted by WeeYari

I've been on hand for a couple of replica installs over the years and I don't recall needing to do a pin swap on the connectors. OEM RS lights yes need wiring changes, replica no.

Sent from my Elite_5_5_Octa using Tapatalk

PERFECT then !! just waiting my paycheck tomorrow and BOOM I'll buy some on the website... if I got them, then it will be a confirmed source, at least for me, to have parts.... in HEADLIGHT section, there's a 2008 Yaris headlight PROJECTOR retrofit..for those interested.. :)