Question about lexan windows on the liftback

[arcticvitz]

I'm planning on making my own lexan rear windows for an 09 liftback and I was wondering if they would would need to be pre molded with a curve in them before re-adhering them back to the framing. My idea was to trace the windows on paper as a mock up then cut the sheets of lexan accordingly. My logic was that because lexan is flexible i could just bend it to fit the window frames however I'm sure I could be completely dead wrong Anyone know if that's possible or would I need custom shaped pieces to fit properly?

[PHXDEMON]

Lexan is very flexible so you should be fine. Only thing that sucks is that it scratches so easily.

[Brian]

When I had my truck about 5 years ago I swapped out all the windows including the windshield
for lexan. It came with a protective coating on it to resist scratching. I ordered them from a
company online that specializes in lexan windows. I wish I could find the website again cause
It only cost me about $1000 for all the windows. If you look on selectproducts.com they sell a
plexiglass bender or you can slowly heat it to get a slight curve out of it.

[kustom play]

there used to be this place called speed glass

but yea lexan scratches super easy and I have a good feeling on a DD it would yellow after a while

[arcticvitz]

Originally Posted by kustom play

there used to be this place called speed glass

but yea lexan scratches super easy and I have a good feeling on a DD it would yellow after a while

My plan was to have it tinted on the inside and out before installing it thus making it fade and scratch resistant! Thank you for your help I will be sure to post photos of the completed project and maybe even sell completed pieces if it all works out

[ezhacker1]

are you going for shatter resistant windows?

[Mouse]

It's for a weight savings

[kustom play]

i would be interested to see how the front window holds up

[Tamago]

question:

do you still have your air conditioning and stereo?

[Nexus1155]

No, but seriously.... is this for weight savings because unless everythign is gutted, you are doing the wrong thing first..

"More than you can afford buddy..... Ferrari"

[arcticvitz]

Originally Posted by Nexus1155

No, but seriously.... is this for weight savings because unless everythign is gutted, you are doing the wrong thing first..

"More than you can afford buddy..... Ferrari"

The car is completely gutted including radio and AC....hell I even pulled out my side curtain airbags and cut off the roof mounts that they used to be attached to Basically anything that could be removed from inside of the car that didn't affect its structural integrity and didn't cost a fortune to remove is now gone. So to answer your question, yes this is for weight savings

[arcticvitz]

Originally Posted by Tamago

question:

do you still have your air conditioning and stereo?

Negative they are both gone

[Tamago]

power window regulators + lexan is pimp!

[kustom play]

lol

[Sodium Duck]

Interesting project, post pics if you do this!

[Tamago]

Originally Posted by Sodium Duck

Interesting project, post pics if you do this!

it already looks a lot like this:

[ezhacker1]

well if you go ahead with lexan all around besides lightweight you would have good protection from thieves then again it'll be a death trap if you need to break the glass to get out.

[arcticvitz]

Originally Posted by ezhacker1

well if you go ahead with lexan all around besides lightweight you would have good protection from thieves then again it'll be a death trap if you need to break the glass to get out.

I'm leaving the front windows as is for two reasons!
A. So I can still get out of the car in an emergency
B. So i don't suffocate to death from burning plastic if my engine happens to catch on fire