Did you get your wheels powder coated? Come on in. Need Price Help - Toyota Yaris Forums

JumpmanYaris · 11-04-2010, 05:19 PM

Ok people I got a set of wheels that is gonna be on my Yaris next summer and I want them sand blasted and powder coated.
I talked to a guy from a shop and this is what is gonna run me.
Sandblasted: $120 for all 4 wheels
Powdercoated: $60 per wheel
So my total is $360
I will keep looking and asking shops but $360 imo is
HIGH, I might find some new white wheels for that price don't you think?

I need suggestions and what you think
Thanks for any help

severous01 · 11-04-2010, 05:24 PM

coaters down here in SETX are charging our bmw dealership 125/wheel...total. so, take it or leave it...you got a good deal goin there.

to me, i'd take my wheels to a performance shop, ask the lowest paid guy to blast them durning his lunch for 75, get them back from him and coat them myself. if you go to sears you can get powder for like 10 bux a package...and i can't see it being more than 2 packages for wheels unless you're just spraying around instead of on the wheels...find an old oven you arent using, set it to 375 and put them in there for about 4 hours.

save like 250 bux, maybe start your own business...or, take off your valve cover and coat it, take the alternator off and pull it apart and coat the shell, water pump, shifter and knob, springs, strut braces, under-body bracing and who knows what else...

33OH · 11-04-2010, 08:15 PM

That's about right, why most people sand and spraypaint.

JumpmanYaris · 11-04-2010, 08:54 PM

So that would be a good price?

33OH · 11-04-2010, 08:56 PM

It's a fair price, yes. Sometimes you can find locals on Craigslist looking for work as well who will do it cheaper. But just keep in mind, like anything, they need to know what they're doing. There are different "weights" (grades, strengths, etc..) of sand and certain sands will damage aluminum wheels.

33OH · 11-04-2010, 08:57 PM

And just to put it in perspective - to sandblast my wheels MYSELF, cost me about $120 in supplies. (Aircraft coating remover and sand.) They were already powdercoated before and that's why, but still..

MUSKOKA800 · 11-05-2010, 10:39 AM

In Hamilton, Ontario, Canada a wheel specialty shop known for wheel repairs and re-finishing through out a figure of CA$120.00 per wheel for refinishing only and suggested that I could buy new from them for a similar cost.

JumpmanYaris · 11-05-2010, 01:51 PM

Thanks people for your input, I did found a CHEAPER place, $250 http://www.jhffinishing.com/index.html
its a loca shop and the members from my local forum recomends the place the guys a friendly, cool people and the work looks Awsomeness, So I found the place where they are going

arunto · 11-06-2010, 12:36 AM

my powder coater charges $60 a wheel for powder and sandblasting...a little bit more or less depending on wheel size

JumpmanYaris · 11-06-2010, 12:44 AM

Do you have any pictures of his work

11-05-2010, 10:39 AM	#7
MUSKOKA800 Drives: Scion FRS RS2, ‘21 Crosstrek Join Date: Oct 2008 Location: Chatham, Ontario, Canada Posts: 1,729	In Hamilton, Ontario, Canada a wheel specialty shop known for wheel repairs and re-finishing through out a figure of CA$120.00 per wheel for refinishing only and suggested that I could buy new from them for a similar cost. __________________ TRD Upgrades: 18" Wheels wrapped in 215/35/18 PZero's, Sportivo Shocks/Struts, Lowering Springs, Swaybar, Axle-Back Exhaust, Oil Cap, Rad Cap, Signage. Aftermarket Goodies: Piggies SS, K&N Drop-In, Blitz S/C, DC Header, NST Pulley) Toyota Options/Accessories: Sport Pedal Covers, Sport Shift Knob, Ipod Interface, Summer Mats, Winter Mats, Cruise Control, Auto-Dim Mirror, Echo steelies with winter boots.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
When will the Yaris hit the showrooms at dealers?	Petrolhead	New YARIS Purchase Forum	181	11-28-2011 08:03 AM
At last! new wheels!	eTiMaGo	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	15	06-17-2010 05:42 PM
I got some new wheels!!!	2006fronty	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	34	09-01-2009 10:41 PM
Whats wrong with Rota's?	mastaofdisasta	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	172	05-22-2009 12:13 PM
Buddy Club Wheels	BulletProofAuto	Sponsors Classifieds Area	8	10-19-2006 07:55 PM

11-04-2010, 05:24 PM	#2
severous01 Drives: 2008 yaris, stripped, red Join Date: Jan 2009 Location: SE Texas Posts: 977	coaters down here in SETX are charging our bmw dealership 125/wheel...total. so, take it or leave it...you got a good deal goin there. to me, i'd take my wheels to a performance shop, ask the lowest paid guy to blast them durning his lunch for 75, get them back from him and coat them myself. if you go to sears you can get powder for like 10 bux a package...and i can't see it being more than 2 packages for wheels unless you're just spraying around instead of on the wheels...find an old oven you arent using, set it to 375 and put them in there for about 4 hours. save like 250 bux, maybe start your own business...or, take off your valve cover and coat it, take the alternator off and pull it apart and coat the shell, water pump, shifter and knob, springs, strut braces, under-body bracing and who knows what else...

11-04-2010, 08:15 PM	#3
33OH Drives: '08 Yaris Join Date: Oct 2008 Location: Dover, Ohio Posts: 7,606	That's about right, why most people sand and spraypaint.

11-04-2010, 08:56 PM	#5
33OH Drives: '08 Yaris Join Date: Oct 2008 Location: Dover, Ohio Posts: 7,606	It's a fair price, yes. Sometimes you can find locals on Craigslist looking for work as well who will do it cheaper. But just keep in mind, like anything, they need to know what they're doing. There are different "weights" (grades, strengths, etc..) of sand and certain sands will damage aluminum wheels.

11-04-2010, 08:57 PM	#6
33OH Drives: '08 Yaris Join Date: Oct 2008 Location: Dover, Ohio Posts: 7,606	And just to put it in perspective - to sandblast my wheels MYSELF, cost me about $120 in supplies. (Aircraft coating remover and sand.) They were already powdercoated before and that's why, but still..

11-06-2010, 12:36 AM	#9
arunto Drives: 2008 Yaris LB Join Date: Oct 2008 Location: Indy Posts: 89	my powder coater charges $60 a wheel for powder and sandblasting...a little bit more or less depending on wheel size