Midpipe similarities between XD and yaris? - Toyota Yaris Forums

enviri · 06-21-2012, 09:09 PM

another thread got me thinking, would a midpipe for the XD fit yaris? Thoughts?

I'm seeing if its viable to get an aftermarket XD pipe (with emissions stuff) into a yaris. the chassis is I say 90%+ similar...

IT SEEMS the flange needs rotation, and the hangers may need modification. the bends differ only little so that should be a non-issue. The midpipe length is what worries me. I just made a little compare from the EPC..

tooter · 06-21-2012, 09:16 PM

It should work as both midpipes share the same 17410 part number.

enviri · 06-21-2012, 09:24 PM

^ part numbers differ only slightly. Maybe?

SCION XD: 17410‑37270
TOYOTA IST: 17410‑37280
YARIS TS 1.8L: 17410‑37220/17410‑37221
YARIS 1.5L: 17410‑21540/17410‑21541

tooter · 06-21-2012, 11:11 PM

Ah, didn't see the suffixes.

thebarber · 06-22-2012, 09:31 AM

Don't think it'll work.

As a side note, they had a 10th Gen corolla on a rotisserie at my local dealership a couple years ago. It had the 2zrfe in it as the.exhaust manifold was at the back and the piping looked similar in diameter as the yaris where it shrinks down after the resonator. (In my mind its why aucorium had such large gains with intake and exhaust)

I would (and did) just get a custom pipe made from the back of the resonator to the axle section for use with my Megan axleback

BEEF · 06-22-2012, 09:57 AM

so how messed up would it be to take the resonator out? I don't think it is required like the cats are, are they?

just cut it after the second cat and go from there...

eTiMaGo · 06-22-2012, 11:40 AM

You could even do without the second cat

thebarber · 06-22-2012, 01:11 PM

It'll sound raspy without the resonator

07typeS · 06-22-2012, 06:45 PM

Yea the resonator quiets it down a bit and gets rid of that raspiness.. Maybe eliminate the second cat and get a high flow resonator..

06-21-2012, 09:09 PM	#1
enviri View User's Garage Drives: 2010 Yaris Join Date: Oct 2008 Location: CT Posts: 1,519	Midpipe similarities between XD and yaris? another thread got me thinking, would a midpipe for the XD fit yaris? Thoughts? I'm seeing if its viable to get an aftermarket XD pipe (with emissions stuff) into a yaris. the chassis is I say 90%+ similar... IT SEEMS the flange needs rotation, and the hangers may need modification. the bends differ only little so that should be a non-issue. The midpipe length is what worries me. I just made a little compare from the EPC..

06-22-2012, 09:31 AM	#5
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	Don't think it'll work. As a side note, they had a 10th Gen corolla on a rotisserie at my local dealership a couple years ago. It had the 2zrfe in it as the.exhaust manifold was at the back and the piping looked similar in diameter as the yaris where it shrinks down after the resonator. (In my mind its why aucorium had such large gains with intake and exhaust) I would (and did) just get a custom pipe made from the back of the resonator to the axle section for use with my Megan axleback __________________

06-22-2012, 09:57 AM	#6
BEEF View User's Garage Drives: 2008 yaris 3d Join Date: Apr 2011 Location: north carolina Posts: 732	so how messed up would it be to take the resonator out? I don't think it is required like the cats are, are they? just cut it after the second cat and go from there... __________________ Be the change you wish to see in the world -Mahatma Gandhi-

06-22-2012, 11:40 AM	#7
eTiMaGo vroom vroom View User's Garage Drives: lil red 5-door Join Date: Sep 2006 Location: Bangkok, Thailand Posts: 7,744	You could even do without the second cat __________________ The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ...

06-22-2012, 01:11 PM	#8
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	It'll sound raspy without the resonator __________________

06-21-2012, 09:16 PM	#2
tooter play every day Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012 Location: Los Angeles Posts: 1,962	It should work as both midpipes share the same 17410 part number.

06-21-2012, 09:24 PM	#3
enviri View User's Garage Drives: 2010 Yaris Join Date: Oct 2008 Location: CT Posts: 1,519	^ part numbers differ only slightly. Maybe? SCION XD: 17410‑37270 TOYOTA IST: 17410‑37280 YARIS TS 1.8L: 17410‑37220/17410‑37221 YARIS 1.5L: 17410‑21540/17410‑21541

06-21-2012, 11:11 PM	#4
tooter play every day Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012 Location: Los Angeles Posts: 1,962	Ah, didn't see the suffixes.

06-22-2012, 06:45 PM	#9
07typeS View User's Garage Drives: 2007 White Toyota Yaris Type S Join Date: Dec 2006 Location: Southern California Posts: 439	Yea the resonator quiets it down a bit and gets rid of that raspiness.. Maybe eliminate the second cat and get a high flow resonator.. __________________ TRD Springs w/ KYB Struts and Shocks, Custom CAI w/ K&N filter and pre filter wrap, Weapon R Header, Stock 15 inch alloys, Dezod Performance pads, Tanabe Front Strut Bar, 35% front door Tint and 20% Rear doors back Tint, De-Badged Ass, Custom painted flat black interior, Pioneer deh-p6700bt w/ IPOD hookup, Infinity components up front with custom mounted tweeter, Inifinity 6x9's out back, 1 12" kicker comp cvr........