 |
 |
|
|
02-19-2015, 05:07 PM
|
#1 |
|
I've made a post!
Drives: 2008 Yaris Sedan Join Date: Feb 2015
Location: Los Angeles CA
Posts: 1
|
Rasp/scrape, only when turning right
Hi guys! I own a 2008 Yaris S, currently at 102,000 miles. Ever since I bought it used at 52k, there has been a scraping noise when I crank the wheels all the way to the right. I don't have that problem under any other circumstance.
Recently I've noticed a slight thump if I'm making a hard right from a stop, but only infrequently, like every couple days or so. I read through the control arm bolt thread and took a peek; they're both there, nice and shiny. Any ideas? |
|
|
|
02-19-2015, 05:53 PM
|
#2 |
  
Drives: Decepticon - Ravage Join Date: Nov 2008
Location: San Francisco
Posts: 1,464
|
What is the condition of your wheel liner? The black covering around the wheel well.
Also what are your wheel specs in the front. With mine, i foul/scrape when i go full lock at certain times, because the inside of the wheel scrapes the control arm
__________________
 Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274 |
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wheels slipping when hard lock turning - dealer says this is normal? | eskiepeskie | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 3 | 12-08-2012 09:49 PM |
| Turning on the a/c | caineroad | Fuel Economy Forum | 31 | 07-29-2011 12:07 PM |
| Higher tire pressure=less turning ability?? | dchurchwell | Fuel Economy Forum | 4 | 05-07-2011 10:56 AM |
| "Clunk" When Turning | KRAZGRL | DIY / Maintenance / Service | 39 | 07-30-2010 02:16 PM |
| 2006 Yaris clicking/clunking when turning | heistp | General Yaris / Vitz Discussion | 1 | 10-13-2009 10:48 AM |
Linear Mode
