 |
 |
|
|
10-04-2020, 11:04 PM
|
#1 |
 Drives: 2007 Toyota Yaris 3 door Join Date: Sep 2018
Location: Arizona
Posts: 425
|
alternator crooked
when i tighten up my belt my alternator start pivoting a little bit crooked, i cant tighten my belt up, help!
|
|
|
|
10-05-2020, 08:07 AM
|
#2 |
 Drives: 2010 yaris 3 door hatch Join Date: Jun 2013
Location: Sheboygan Falls, Wi.
Posts: 543
|
Is anything bent? We might need pictures.
|
|
|
|
|
10-05-2020, 02:39 PM
|
#3 |
|
Drives: 2007 Toyota Yaris 3 door Join Date: Sep 2018
Location: Arizona
Posts: 425
|
my lower bolt is bent, i bought a new bolt at the dealer and still tightens up crooked
|
|
|
|
|
10-05-2020, 10:42 PM
|
#4 |
|
2ZR swap. DO IT! Ask how!
Drives: 09 Meteoric Metallic HB Join Date: Feb 2011
Location: West Michigan
Posts: 2,333
|
I had a similar issue with a broken alternator mounting bolt on the 2ZR--sheared off at the nut and allowed the alternator to sit a little crooked. Started throwing belts when I got on the gas. If the bolt is bent inside the mounting boss, you may have to pull the bumper cover and radiators out to get at it.
|
|
|
|
|
11-06-2020, 10:05 PM
|
#5 |
|
Drives: 2007 Toyota Yaris 3 door Join Date: Sep 2018
Location: Arizona
Posts: 425
|
well it turns out i need a new engine block, cause where the alternator goes over the block there is a section thats indented ineards and causes the alternator to sit crooked, this is where im at with my life :(
|
|
|
|
|
11-06-2020, 10:51 PM
|
#6 |
|
Drives: 2010 yaris 3 door hatch Join Date: Jun 2013
Location: Sheboygan Falls, Wi.
Posts: 543
|
We need pictures! Maybe you can shave the area flat and shim it to make up the space.
|
|
|
|
 |
|
|
Linear Mode
