installing Penguin Garage rear hub spacers! - Page 6 - Toyota Yaris Forums

marcus · 08-03-2010, 09:42 AM

im running 16x7 +40 offset and just added 5mm spacer on the left rear.. looks alot more even compare to stock crooked frame..

derickveliz2 · 08-03-2010, 09:48 AM

Quote:

Originally Posted by marcus

im running 16x7 +40 offset and just added 5mm spacer on the left rear.. looks alot more even compare to stock crooked frame..

Where did you get the 5mm spacer?

D.

DeathBeard · 08-03-2010, 10:05 AM

any local tire shop should carry a 5mm spacer

marcus · 08-03-2010, 10:06 AM

or any tire and rim place..cost me $10 bucks..i actually had 13mm for left and 10 mm for right spacer fr penguin but rubbing on me due to my offset..but itll work perfect for 45mm offset..

SKurj · 05-21-2011, 10:53 AM

Quote:

Originally Posted by marcus

or any tire and rim place..cost me $10 bucks..i actually had 13mm for left and 10 mm for right spacer fr penguin but rubbing on me due to my offset..but itll work perfect for 45mm offset..

This is perhaps the kit penguin should sell. Just fitted the 10mm on mine and was surprised how obvious the difference between the left and the right is. Well at least to me. 13-15mm for left, 10mm for right.

marcus · 05-21-2011, 12:02 PM

Quote:

Originally Posted by SKurj

This is perhaps the kit penguin should sell. Just fitted the 10mm on mine and was surprised how obvious the difference between the left and the right is. Well at least to me. 13-15mm for left, 10mm for right.

you should have just bought mine aint putting it back on my wheel offset on +40 is rubbing on dips..but it does look sick from the back though..

derickveliz2 · 09-08-2010, 01:37 PM

Finally I was able to pull out the spacers, when I was going to put back the camber kit I noticed that didn't fit and I had to trim the inner circle of the camber kit to make it fit, I wonder if this discrepancy had to do with the fact that the spacers where stuck!

Thoughts?

Tamago · 09-11-2010, 06:12 PM

did you grease them before install?

derickveliz2 · 09-11-2010, 11:15 PM

Quote:

Originally Posted by Tamago

did you grease them before install?

Yes I did, and I noticed that they didn't fit loose but very tight and put extra grease, the lugs slowly set the spacers in place by pressure putting everything back together.

D.

Tamago · 09-12-2010, 01:37 AM

Quote:

Originally Posted by derickveliz2

Yes I did, and I noticed that they didn't fit loose but very tight and put extra grease, the lugs slowly set the spacers in place by pressure putting everything back together.

D.

the lug nuts pulled the spacers on tight?

did you remove any of the rust buildup on the hub itself before installing the spacer?

derickveliz2 · 09-14-2010, 11:39 PM

Quote:

Originally Posted by Tamago

the lug nuts pulled the spacers on tight?

did you remove any of the rust buildup on the hub itself before installing the spacer?

Yes I did!
I was surprised that even the camber kit didn't fit and I had to trim it.

D.

pennyracer · 05-21-2011, 12:29 PM

sorry to jump in but am i reading that the off set on the back of the lb yaris is different from the left to the right im running 17x7 momo wheels off set is 35mm i think but i want spacers ? looking for the straight facts that is just a picture of the front rim

[IMG]

[/IMG]

09-11-2010, 06:12 PM	#8
Tamago View User's Garage Drives: UZJ100 Join Date: Dec 2006 Location: Off Grid Posts: 4,926	did you grease them before install? __________________ Been a long time messing with cars..

05-21-2011, 12:29 PM	#12
pennyracer boydstir View User's Garage Drives: 08 yaris liftback Join Date: Feb 2009 Location: grants pass Posts: 424	sorry to jump in but am i reading that the off set on the back of the lb yaris is different from the left to the right im running 17x7 momo wheels off set is 35mm i think but i want spacers ? looking for the straight facts that is just a picture of the front rim [IMG][/IMG] Last edited by pennyracer; 05-21-2011 at 12:31 PM. Reason: adding picture

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
When will the Yaris hit the showrooms at dealers?	Petrolhead	New YARIS Purchase Forum	181	11-28-2011 07:03 AM
Penguin Garage Rear Hub Spacers!!	Penguin Garage	Sponsors Classifieds Area	92	09-02-2009 06:16 PM
Gauging interest on hub spacers for the yaris	Tamago	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	61	05-22-2009 02:18 PM
Rear Spacers... (Who sells them?)	Saggio	General Yaris / Vitz Discussion	6	02-06-2009 08:40 AM
Installing a rear window defroster	trn9	DIY / Maintenance / Service	0	01-06-2009 02:56 AM

08-03-2010, 09:42 AM	#1
marcus toyota View User's Garage Drives: 2007 Yaris RS Blazed Join Date: Oct 2006 Location: toronto, canada Posts: 3,637	im running 16x7 +40 offset and just added 5mm spacer on the left rear.. looks alot more even compare to stock crooked frame..

08-03-2010, 10:05 AM	#3
DeathBeard Drives: 2010 Yaris S Join Date: Apr 2010 Location: Los Angeles, CA Posts: 574	any local tire shop should carry a 5mm spacer

08-03-2010, 10:06 AM	#4
marcus toyota View User's Garage Drives: 2007 Yaris RS Blazed Join Date: Oct 2006 Location: toronto, canada Posts: 3,637	or any tire and rim place..cost me $10 bucks..i actually had 13mm for left and 10 mm for right spacer fr penguin but rubbing on me due to my offset..but itll work perfect for 45mm offset..

09-08-2010, 01:37 PM	#7
derickveliz2 View User's Garage Drives: Yaris Sedan "S" Join Date: Oct 2008 Location: Central, MA Posts: 2,722	Finally I was able to pull out the spacers, when I was going to put back the camber kit I noticed that didn't fit and I had to trim the inner circle of the camber kit to make it fit, I wonder if this discrepancy had to do with the fact that the spacers where stuck! Thoughts?