DIY Cruise Control FAQ (2006-2010 Yaris)

[colindoling]

Originally Posted by CTScott

What type of kit did you buy?

i bought a rostra kit

[max924]

Hi Scott, I have a 2010 Yaris sedan with manual trans, pwr windows/locks and ac. Can you send me the list of parts required for the cruise control and pricing?

I tried sending a pm and it did not seem to work so just posting here...

Thanks!

Max

[pribek]

Hi Scott, I have a Yaris 2016 Hybrid with AT and TSS . The car is for European market (Croatia).
Can you send me the list of parts required for the cruise control and pricing?
If it helps I can send VIN number.
Sorry for my bad english

[jra]

I bought a cruise kit from CT Scott about a year ago for my French built, 2015 Yaris L automatic, Took about 45 minutes to install, plug and play. Looks like it was installed at the factory and still works great.

[nvfool]

I would like to get a kit for a 2012 sedan. Thank you

[jra]

nvfool, when I ordered my cruse from scott, I had to send him a personal message to place order. I don't remember how I done that, clicked on his name in one of his posts or clicked on the quick reply in corner of one of his posts?

[Daemynz]

I apologize if this has been asked before but here goes.

I have a 2010 Yaris Sedan with auto transmission and no power locks or doors.
So for the OEM stalk route, do I just need the cruise control stalk and wire? Or do I also need the ECM connector pin?
Will probably just go ahead and use the steering wheel cover with the hole already in it too.

Cheers

Edit: Looked around a good bit more and looks like I just need the stalk :)

[mumairr]

My Vitz 2010 model Japanese imported. It already has wiring upto ECM (saw it by removing the cover behind the steering )but my cluster doesn't have any indicators for CC. Do you think if i install OEM CC, my car would be able to handle it? irrespective of the indication on the cluster? if this is the case, i might change my insturmenet cluster.

[Dohsh77]

Please
Can you tell my your car engine 1300cc or 1500cc
And what the part number of youe ecu
Please tell my
I want buy ecu to install cruise control
I bought one and it work good but ecu for 1500 cc so i have transimation problem
My e mail
Dohsh77@yahoo.com

[Dohsh77]

I need ecu part number for yaris sedan1300 cc ATM old shap
That support cruise control

[weltall900]

My apologies if this has been asked before. I'm going to attempt this project for my wife's car. I'm not super mechanical, but I'm going to try my best and pray that I don't mess up her car! She has a 2007 Yaris with automatic transmission. I'm wanting to use the OEM stalk setup and I've read through much of this thread and the 2006-2011 Yaris – OEM Cruise Control Installation PDF. However, I'm not sure if her car is Sedan with power OR Sedan without power. Not even sure what that means. She has power locks, power windows, manual seats, automatic transmission, manual side view mirrors, and obviously no cruise control. I included an image from the guide here. Which applies to me? The one I circled in RED or the one I circled in BLUE

[laobo]

Originally Posted by weltall900

My apologies if this has been asked before. I'm going to attempt this project for my wife's car. I'm not super mechanical, but I'm going to try my best and pray that I don't mess up her car! She has a 2007 Yaris with automatic transmission. I'm wanting to use the OEM stalk setup and I've read through much of this thread and the 2006-2011 Yaris – OEM Cruise Control Installation PDF. However, I'm not sure if her car is Sedan with power OR Sedan without power. Not even sure what that means. She has power locks, power windows, manual seats, automatic transmission, manual side view mirrors, and obviously no cruise control. I included an image from the guide here. Which applies to me? The one I circled in RED or the one I circled in BLUE

dear!
w/power and w/out power means?
different?

[Dohsh77]

All this ecu p/n for 1nz engine 1500cc. Any ecu p/n for 2nz 1300 cc

[DanielNorrisII@Gmail.com]

I have a 2007 Toyota Yaris with Blue and Brown Wire in D3 no A21 pin 40. What am I supposed to do with wire coming from ECM A21 pin 40?

[DanielNorrisII@Gmail.com]

Ok, I looked up the electrical drawings for cruise control. D3 goes to AD4, which is a connection between harnesses, and on the other side of the harness connection their is no wire coming out to pin 40 on A21. I got extra repair terminals, so I will put a terminal in the empty side going to pin 40 and solder it to the repair terminal I install in pin 40.

[Prakersa]

Originally Posted by DanielNorrisII@Gmail.com

Ok, I looked up the electrical drawings for cruise control. D3 goes to AD4, which is a connection between harnesses, and on the other side of the harness connection their is no wire coming out to pin 40 on A21. I got extra repair terminals, so I will put a terminal in the empty side going to pin 40 and solder it to the repair terminal I install in pin 40.

Can you share the diagram of CC. Still curious for the AD4 location... Tks

[DanielNorrisII@Gmail.com]

Also, where can I get a Cruise Control Indicator Module? Does CTScott still have some available or is their a wiring diagram that I could build one myself?

[giorgos01]

HI CTScott

15 days ago i bought a 2006 gasoline 1.3 i really want to install cc and i would like your help, the car is european and my ecm number is
89661-0D310

https://photos.app.goo.gl/qqk757aZasRFupdj7