DIY Cruise Control FAQ (2006-2010 Yaris) - Page 16 - Toyota Yaris Forums

CTScott · 06-04-2012, 09:29 AM

Quote:

Originally Posted by davidei92

Hello guys, I'm Italian and I own a toyota yaris d4d 1.4 diesel (90hp). I want to install cruise control, but I have no idea how to do it. I ask help to you because you are an expert, and you will tell me =) sorry my english =)

For the D4D there is not an easy way to add cruise control since Toyota did not program it into the ECM.

davidei92 · 06-04-2012, 10:48 AM

so there is nothing to do? = (

CTScott · 06-04-2012, 11:07 AM

Quote:

Originally Posted by davidei92

so there is nothing to do? = (

I have read that people have had the AP800 installed on D4D Yaris. I read that it cost about $800 USD.

http://www.conrad-anderson.co.uk/cru...isecontrol.htm

davidei92 · 06-04-2012, 11:13 AM

sorry but what the AP 800?
But buying the same pieces so it does not work? what is the difference between use and europe?

CTScott · 06-04-2012, 11:15 AM

Quote:

Originally Posted by davidei92

sorry but what the AP 800?

Click on the link in my last response. It is an aftermarket cruise control system.

davidei92 · 06-04-2012, 12:39 PM

Thank you. But my model is absent from the list
http://www.conrad-anderson.co.uk/cru...rol-toyota.htm

CTScott · 06-04-2012, 01:09 PM

Quote:

Originally Posted by davidei92

Thank you. But my model is absent from the list
http://www.conrad-anderson.co.uk/cru...rol-toyota.htm

If your car is a 2nd generation Yaris with the D4D then it would fall into:

Yaris All except 1.0 2005 > £421.00 £396.00 £411.00 £374.50 £135.00

davidei92 · 06-04-2012, 01:55 PM

in addition to the module, what should I take? Thank you. : D

CTScott · 06-04-2012, 02:44 PM

Quote:

Originally Posted by davidei92

in addition to the module, what should I take? Thank you. : D

I would contact that company or someone in Italy that does the installations to find out. I have not seen the directions for installation, so I am not sure if anything else is needed.

CodyTheBody · 07-23-2012, 01:20 PM

2009 Yaris 4Door. Just installed clutch switch last night and connected wiring that was already there; thank you Toyota! If it wasn't required to purchase the D3 connectors, then those wires (like the blue and brown D3 wires that have been pictured) should be there right?

CTScott · 07-23-2012, 01:27 PM

Quote:

Originally Posted by CodyTheBody

2009 Yaris 4Door. Just installed clutch switch last night and connected wiring that was already there; thank you Toyota! If it wasn't required to purchase the D3 connectors, then those wires (like the blue and brown D3 wires that have been pictured) should be there right?

2009 Sedans are a mixed bag. It seems that ones with the power package (locks and windows) have the D3 pins in place and ones without it do not.

CodyTheBody · 07-24-2012, 10:52 AM

Quote:

Originally Posted by CTScott

2009 Sedans are a mixed bag. It seems that ones with the power package (locks and windows) have the D3 pins in place and ones without it do not.

Hmmm. That's weird. The DIY installation says they aren't required so hopefully I won't have to buy something else but we'll see I guess. I haven't been able to look at it just yet.

CTScott · 07-24-2012, 11:15 AM

Quote:

Originally Posted by CodyTheBody

Hmmm. That's weird. The DIY installation says they aren't required so hopefully I won't have to buy something else but we'll see I guess. I haven't been able to look at it just yet.

I actually wrote the DIY and since, in selling parts to many people, have learned about the 09 Sedans as being an exception to my rules.

CodyTheBody · 07-24-2012, 03:02 PM

Quote:

Originally Posted by CTScott

I actually wrote the DIY and since, in selling parts to many people, have learned about the 09 Sedans as being an exception to my rules.

Gotcha. Didn't realize that. Well, I'll check my D3 connector tomorrow and get holla back. Do you sell those pin connectors?

Aetre · 07-25-2012, 12:47 PM

Alrighty. Gonna try this on my '09 hatchback with A/T. All parts ordered...

Just verifying: I don't need wiring from the ECM to the steering column, ECM connector pin, or D3 pins, right? (You'd mentioned the '09 sedans having exceptions; are there any known exceptions for the hatches?)

CTScott · 07-25-2012, 01:05 PM

Quote:

Originally Posted by Aetre

Alrighty. Gonna try this on my '09 hatchback with A/T. All parts ordered...

Just verifying: I don't need wiring from the ECM to the steering column, ECM connector pin, or D3 pins, right? (You'd mentioned the '09 sedans having exceptions; are there any known exceptions for the hatches?)

No. Thus far the 09+ LBs have all had the wiring, so just the stalk with harness and mounting screws (and the clutch switch if MT) is required.

Aetre · 07-25-2012, 01:10 PM

Sweet. Many thanks, and when the parts get here (next week), I'll update on how it goes! (So very much hoping the airbag doesn't explode...)

CodyTheBody · 07-29-2012, 01:42 AM

Do I need to buy the screws that are linked with the cruise control stalk or can I find them at Lowe's? If at Lowe's, what size/type screws are they?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
Cruise Control	chessclubloser	DIY / Maintenance / Service	11	03-27-2010 12:59 PM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 05:54 PM
Using Cruise control	Driver	General Yaris / Vitz Discussion	14	11-09-2006 11:12 PM

06-04-2012, 10:48 AM	#2
davidei92 Drives: toyota yaris d4d 90 hp Join Date: Jun 2012 Location: italy Posts: 5	so there is nothing to do? = (

06-04-2012, 11:13 AM	#4
davidei92 Drives: toyota yaris d4d 90 hp Join Date: Jun 2012 Location: italy Posts: 5	sorry but what the AP 800? But buying the same pieces so it does not work? what is the difference between use and europe?

06-04-2012, 12:39 PM	#6
davidei92 Drives: toyota yaris d4d 90 hp Join Date: Jun 2012 Location: italy Posts: 5	Thank you. But my model is absent from the list http://www.conrad-anderson.co.uk/cru...rol-toyota.htm

06-04-2012, 01:55 PM	#8
davidei92 Drives: toyota yaris d4d 90 hp Join Date: Jun 2012 Location: italy Posts: 5	in addition to the module, what should I take? Thank you. : D

07-23-2012, 01:20 PM	#10
CodyTheBody Drives: 2009 Toyota Yaris 4D Join Date: Jul 2012 Location: United States Posts: 11	2009 Yaris 4Door. Just installed clutch switch last night and connected wiring that was already there; thank you Toyota! If it wasn't required to purchase the D3 connectors, then those wires (like the blue and brown D3 wires that have been pictured) should be there right?

07-25-2012, 12:47 PM	#15
Aetre Drives: 2009 3dr Liftback Join Date: Mar 2011 Location: Northern Virginia Posts: 13	Alrighty. Gonna try this on my '09 hatchback with A/T. All parts ordered... Just verifying: I don't need wiring from the ECM to the steering column, ECM connector pin, or D3 pins, right? (You'd mentioned the '09 sedans having exceptions; are there any known exceptions for the hatches?)

07-25-2012, 01:10 PM	#17
Aetre Drives: 2009 3dr Liftback Join Date: Mar 2011 Location: Northern Virginia Posts: 13	Sweet. Many thanks, and when the parts get here (next week), I'll update on how it goes! (So very much hoping the airbag doesn't explode...)

07-29-2012, 01:42 AM	#18
CodyTheBody Drives: 2009 Toyota Yaris 4D Join Date: Jul 2012 Location: United States Posts: 11	Do I need to buy the screws that are linked with the cruise control stalk or can I find them at Lowe's? If at Lowe's, what size/type screws are they?