DIY (08' USDM Liftback): ESUSE Fog Light Install v2.0 - Page 3 - Toyota Yaris Forums

joeljcruz86 · 05-03-2010, 12:24 AM

oh, hmm =/. Well my friend helped me about having the green wire tapped into the factory pin leading to the fog light Light in the guage cluster and it works.. What's the bad thing about that? i mean everything works and i do have the "kit relay" still part of the whole thing. The only disadvantage he told me is that when i switch the high's on, it doesn't disable it and he said that won't pass inspection. =/

Rikster · 06-01-2010, 11:46 AM

I want to install the fog lights using the parts that come with the kit!(trough the firewall)

To which wires do i connect the ACC and the Battery power wires using the splice connectors that came with the kit?

Toyo Chris · 07-19-2010, 03:45 PM

Thanks a lot, I received my kit today. I hope to install them this week.

Toyo Chris · 07-23-2010, 12:51 AM

How can I install the foglights without the factory way. I mean, how can I install them in a way I can turn them on without turning the Headlights on, just turning it on with the switch that comes with the kit and the relay, etc.

Toyo Chris · 07-23-2010, 01:46 AM

Is there any way of installing the kit without putting it to work with the stock wiring?

Toyo Chris · 08-04-2010, 03:54 PM

Ok, I finally installed them and put them to work!

husaynkhan · 08-08-2010, 10:25 AM

am unable to seee these picture fully, plz help. each pic is loading only at
half

Yarisaur · 01-20-2011, 06:11 PM

Okay installed mine only one problem... the indicator light for the switch stays on even with the car off?? is this a problem/ will it kill my battery?

CTScott · 01-20-2011, 08:33 PM

Quote:

Originally Posted by Yarisaur

Okay installed mine only one problem... the indicator light for the switch stays on even with the car off?? is this a problem/ will it kill my battery?

To make the light stay off you have to modify the circuit within the switch. If the switch has LEDs for the lights then there won't be an issue with battery drain.

Yarisaur · 01-21-2011, 01:22 PM

And how would i modify the circuit?

CTScott · 01-21-2011, 02:28 PM

Quote:

Originally Posted by Yarisaur

And how would i modify the circuit?

Check out this post:

http://www.yarisworld.com/forums/sho...7&postcount=39

facu1984 · 02-15-2011, 01:17 PM

My fog lights work perfect, but the fog indicator light on the panel is not turning on...
any ideas?

Brianr4 · 02-17-2011, 11:45 AM

I have mine working now, first switch went bad.
Still wondering though if I get a factory stalk with foglight option, how will the fogs operate? Only with the headlights on?
The way they work now I can turn them on anytime, with the car running or not.

CTScott · 02-17-2011, 01:32 PM

Quote:

Originally Posted by Brianr4

I have mine working now, first switch went bad.
Still wondering though if I get a factory stalk with foglight option, how will the fogs operate? Only with the headlights on?
The way they work now I can turn them on anytime, with the car running or not.

If you switch to an OEM stalk they will just work with the low beams on, unless you cut the wire going to pin 4 of the stalk and tie the stalk end of it to ground (which will allow you to turn the fogs on at any time).

CTScott · 02-21-2011, 08:25 AM

Quote:

Originally Posted by sri

Mine working fine and I hook the relay trigger to my low beam(LH) pin8 on D4. My fog light can only be turned on if I turn on the head light, which is what I want. The problem now is if I switch to high beam the fog light wont work. Is there any signal I can tap dimmer light? From the manual it stated pin9 but high beam also share same pin9.

If you hook it to pin 13 they will turn on with the lows and highs, and will still turn off when the headlight switch is off.

CTScott · 02-27-2011, 08:26 AM

Quote:

Originally Posted by sri

Seems like the wires position in reverse order. I tried to hook to last pin from right and it didn't work also. Forgot to mention, mine is sedan, J model and from Malaysia.

What year is your car? With the lack of the two wires on the top of the connector, it looks like yours was not factory wired for front fog lights.

CTScott · 02-27-2011, 09:48 AM

Quote:

Originally Posted by sri

Car was made in 2008 and J model don't come with fog light installed.

OK. I don't have wiring diagrams for your area, so what I would do is to measure the voltage on each pin to ground with the headlight switch off and then with it in the parking light mode (one click). You are looking for a wire that measures 12V with the headlight switch off and then goes to 0V with it one click on.

Tylermayer · 03-05-2011, 03:57 PM

how much would it cost to have it done professionally!??

06-01-2010, 11:46 AM	#38
Rikster Drives: Toyota Yaris (2010) Join Date: Feb 2010 Location: NL Posts: 54	I want to install the fog lights using the parts that come with the kit!(trough the firewall) To which wires do i connect the ACC and the Battery power wires using the splice connectors that came with the kit? Last edited by Rikster; 06-01-2010 at 12:23 PM.

03-05-2011, 03:57 PM	#54
Tylermayer View User's Garage Drives: 2007 Toyota Yaris Join Date: May 2010 Location: Snohomish, WA Posts: 291	how much would it cost to have it done professionally!?? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fog light install	07yaris_fe	Cosmetic Modifications (Exterior/Interior)	10	07-20-2010 01:18 PM
Looking for the Toyota Fog Light install	RocknRollRon	DIY / Maintenance / Service	33	06-13-2010 06:46 PM
DIY:Day time running light Disabled with stock fog light remain function	summergxz	DIY / Maintenance / Service	12	09-26-2007 10:42 AM
Before I start calling around: fog light install prices	St_G	Cosmetic Modifications (Exterior/Interior)	4	03-17-2007 09:45 AM
Finally installed oem ebay fog light for hatchback	Adriaan	General Yaris / Vitz Discussion	6	12-27-2006 04:24 PM

05-03-2010, 12:24 AM	#37
joeljcruz86 Little Eggy View User's Garage Drives: Toyota Yaris Liftback 3DR 2009 Join Date: Apr 2010 Location: North Plainfield, NJ Posts: 30	oh, hmm =/. Well my friend helped me about having the green wire tapped into the factory pin leading to the fog light Light in the guage cluster and it works.. What's the bad thing about that? i mean everything works and i do have the "kit relay" still part of the whole thing. The only disadvantage he told me is that when i switch the high's on, it doesn't disable it and he said that won't pass inspection. =/

07-19-2010, 03:45 PM	#39
Toyo Chris Drives: Yaris HB Join Date: Aug 2009 Location: Puerto Rico Posts: 18	Thanks a lot, I received my kit today. I hope to install them this week.

07-23-2010, 12:51 AM	#40
Toyo Chris Drives: Yaris HB Join Date: Aug 2009 Location: Puerto Rico Posts: 18	How can I install the foglights without the factory way. I mean, how can I install them in a way I can turn them on without turning the Headlights on, just turning it on with the switch that comes with the kit and the relay, etc.

07-23-2010, 01:46 AM	#41
Toyo Chris Drives: Yaris HB Join Date: Aug 2009 Location: Puerto Rico Posts: 18	Is there any way of installing the kit without putting it to work with the stock wiring?

08-04-2010, 03:54 PM	#42
Toyo Chris Drives: Yaris HB Join Date: Aug 2009 Location: Puerto Rico Posts: 18	Ok, I finally installed them and put them to work!

08-08-2010, 10:25 AM	#43
husaynkhan Drives: new vitz Join Date: Apr 2010 Location: mauritius Posts: 104	am unable to seee these picture fully, plz help. each pic is loading only at half

01-20-2011, 06:11 PM	#44
Yarisaur Drives: 07 Yaris Join Date: Dec 2009 Location: Florida Posts: 91	Okay installed mine only one problem... the indicator light for the switch stays on even with the car off?? is this a problem/ will it kill my battery?

01-21-2011, 01:22 PM	#46
Yarisaur Drives: 07 Yaris Join Date: Dec 2009 Location: Florida Posts: 91	And how would i modify the circuit?

02-15-2011, 01:17 PM	#48
facu1984 Drives: 2007 Join Date: Nov 2006 Location: FL Posts: 15	My fog lights work perfect, but the fog indicator light on the panel is not turning on... any ideas?

02-17-2011, 11:45 AM	#49
Brianr4 Drives: 2008 Yaris 3dr Hatchback Join Date: Oct 2010 Location: New Orleans Posts: 43	I have mine working now, first switch went bad. Still wondering though if I get a factory stalk with foglight option, how will the fogs operate? Only with the headlights on? The way they work now I can turn them on anytime, with the car running or not.