Air Intake Question - Toyota Yaris Forums

ruimond · 11-09-2008, 04:08 AM

Hi guys, just got a question. Every air intake i have seen states it is for the 1.5L Yaris. But i have the 1.3L version, does anyone know if these fit and work for mine as well?

Thanks alot.

eTiMaGo · 11-09-2008, 07:48 AM

Depends, check if your engine is a 2NZ-FE or a 2SZ-FE

AFAIK *most* 1.5 (1NZ) mods (the NST crak pulley comes to mind) would fit the 2NZ as they are almost the same, just the bore and stroke of the pistons is different.

Or, best yet, take a couple pictures of your engine bay and post it here so we can take a better look at the intake configuration!

ruimond · 11-09-2008, 10:47 PM

hey eTiMaGo, ok i did some photos with the details :D hope this helps.

ruimond · 11-10-2008, 07:25 AM

I was looking through some posts by other people who had installed a CAI made by AEM etc, and the layout and connections kinda look the same to me. But im not exactly sure, hrmm.

1nz · 11-10-2008, 07:55 AM

theyre exactly the same hehe really only internals are a bit different

CASTREX · 11-10-2008, 04:31 PM

You are good to go!

Just pick the US Yaris Intake of your selection and it should fit with out a problem!

I recently installed a Weapon r dragon intake on a friends Yaris with the 1.3 engine just like yours and the fit was perfect.

ruimond · 11-10-2008, 08:03 PM

Quote:

Originally Posted by CASTREX

You are good to go!

Just pick the US Yaris Intake of your selection and it should fit with out a problem!

I recently installed a Weapon r dragon intake on a friends Yaris with the 1.3 engine just like yours and the fit was perfect.

Awesome! Will have a look at one to buy now. :D

ruimond · 11-27-2008, 08:15 PM

Didn't want to start a new thread from a few weeks ago, but finally got my AFE Stage 2 Dry intake installed that i ordered from the US, and it does fit really nicely , apart from one of the small hoses needed to be clamped abit tighter as it was slightly bigger. So other people with 1.3L 2NZ-FE shouldn't have any problems. :D

Here's a pic of it installed in my car:

cali yaris · 11-28-2008, 01:33 AM

cool, I have those in stock - tell your 1.3L friends

Burningbjorn · 11-28-2008, 07:14 AM

I am looking for an airfilter too, but i have an european yaris 1.3.
my engine looks like this! any suggestions?

Yoda · 11-28-2008, 12:30 PM

wow thats different

cali yaris · 11-28-2008, 01:51 PM

yeah it sure is!
...looks turned around like the intake is on the backside, and I think I see the exhaust header in front? wow

Burningbjorn · 11-28-2008, 04:34 PM

Quote:

Originally Posted by cali yaris

yeah it sure is!
...looks turned around like the intake is on the backside, and I think I see the exhaust header in front? wow

I will post some close up pics tomorow, do you guys now were i can find my engine number?

1NZYaris1 · 11-28-2008, 05:31 PM

Engine number is on your id plate normally found on B pillar inside the door.
mines on the passengers side. yours looks to be on the drivers side (since your steering wheel is on the wrong side)

CASTREX · 11-28-2008, 07:47 PM

That looks like the 1L Not the 1.3L

Burningbjorn · 11-29-2008, 04:34 AM

Quote:

Originally Posted by CASTREX

That looks like the 1L Not the 1.3L

It is the 1.3l.

i found a tread with some other pictures from user "Katana", he comes from greece and has the same engine (1.3) with a cold air intake!

take a look at these pictures:

The engine(with CAI):

The engine(without CAI):

MAF Sensor:

and

Maybe he can tell some more how he did the cold air intake.

eTiMaGo · 11-29-2008, 06:22 AM

He got it custom-made if I remember correctly...

11-09-2008, 04:08 AM	#1
ruimond Drives: Yaris YR Join Date: Oct 2008 Location: Perth, Australia Posts: 515	Air Intake Question Hi guys, just got a question. Every air intake i have seen states it is for the 1.5L Yaris. But i have the 1.3L version, does anyone know if these fit and work for mine as well? Thanks alot. __________________ Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres \| AFE Air Intake System \| NST Short Shifter Kit \| NST Shifter Cable Bushing Kit \| NST 10% Underdrive Crank Pulley \| Pedders Sports Springs \| Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip \| RS Side Skirts \| RS Euro Spoiler \| YRX Front Lip Spoiler \| TRD Style Front Grill \| 12mm Rear Hub Spacers \| Ultra Racing 23mm Rear Sway Bar

11-09-2008, 07:48 AM	#2
eTiMaGo vroom vroom View User's Garage Drives: lil red 5-door Join Date: Sep 2006 Location: Bangkok, Thailand Posts: 7,744	Depends, check if your engine is a 2NZ-FE or a 2SZ-FE AFAIK most 1.5 (1NZ) mods (the NST crak pulley comes to mind) would fit the 2NZ as they are almost the same, just the bore and stroke of the pistons is different. Or, best yet, take a couple pictures of your engine bay and post it here so we can take a better look at the intake configuration! __________________ The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ...

11-09-2008, 10:47 PM	#3
ruimond Drives: Yaris YR Join Date: Oct 2008 Location: Perth, Australia Posts: 515	hey eTiMaGo, ok i did some photos with the details :D hope this helps. __________________ Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres \| AFE Air Intake System \| NST Short Shifter Kit \| NST Shifter Cable Bushing Kit \| NST 10% Underdrive Crank Pulley \| Pedders Sports Springs \| Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip \| RS Side Skirts \| RS Euro Spoiler \| YRX Front Lip Spoiler \| TRD Style Front Grill \| 12mm Rear Hub Spacers \| Ultra Racing 23mm Rear Sway Bar

11-10-2008, 07:25 AM	#4
ruimond Drives: Yaris YR Join Date: Oct 2008 Location: Perth, Australia Posts: 515	I was looking through some posts by other people who had installed a CAI made by AEM etc, and the layout and connections kinda look the same to me. But im not exactly sure, hrmm. __________________ Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres \| AFE Air Intake System \| NST Short Shifter Kit \| NST Shifter Cable Bushing Kit \| NST 10% Underdrive Crank Pulley \| Pedders Sports Springs \| Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip \| RS Side Skirts \| RS Euro Spoiler \| YRX Front Lip Spoiler \| TRD Style Front Grill \| 12mm Rear Hub Spacers \| Ultra Racing 23mm Rear Sway Bar

11-27-2008, 08:15 PM	#8
ruimond Drives: Yaris YR Join Date: Oct 2008 Location: Perth, Australia Posts: 515	Didn't want to start a new thread from a few weeks ago, but finally got my AFE Stage 2 Dry intake installed that i ordered from the US, and it does fit really nicely , apart from one of the small hoses needed to be clamped abit tighter as it was slightly bigger. So other people with 1.3L 2NZ-FE shouldn't have any problems. :D Here's a pic of it installed in my car: __________________ Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres \| AFE Air Intake System \| NST Short Shifter Kit \| NST Shifter Cable Bushing Kit \| NST 10% Underdrive Crank Pulley \| Pedders Sports Springs \| Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip \| RS Side Skirts \| RS Euro Spoiler \| YRX Front Lip Spoiler \| TRD Style Front Grill \| 12mm Rear Hub Spacers \| Ultra Racing 23mm Rear Sway Bar

11-10-2008, 07:55 AM	#5
1nz Drives: Vios Join Date: Oct 2008 Location: Brunei Posts: 82	theyre exactly the same hehe really only internals are a bit different

11-10-2008, 04:31 PM	#6
CASTREX Who said Yaris was slow? View User's Garage Drives: Yaris T-Sport 2008 Join Date: Nov 2006 Location: Costa Rica Posts: 1,287	You are good to go! Just pick the US Yaris Intake of your selection and it should fit with out a problem! I recently installed a Weapon r dragon intake on a friends Yaris with the 1.3 engine just like yours and the fit was perfect.

11-28-2008, 01:33 AM	#9
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	cool, I have those in stock - tell your 1.3L friends __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

11-28-2008, 07:14 AM	#10
Burningbjorn Drives: Toyota Yaris 1.3 vvt-i Cool Join Date: Oct 2008 Location: Berkel en rodenrijs, the Netherlands Posts: 37	I am looking for an airfilter too, but i have an european yaris 1.3. my engine looks like this! any suggestions?

11-28-2008, 12:30 PM	#11
Yoda Drives: 2008 Black Sedan Join Date: Oct 2008 Location: FL Posts: 966	wow thats different

11-28-2008, 01:51 PM	#12
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	yeah it sure is! ...looks turned around like the intake is on the backside, and I think I see the exhaust header in front? wow __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

11-28-2008, 05:31 PM	#14
1NZYaris1 View User's Garage Drives: Yaris Join Date: Oct 2008 Location: New Zealand Posts: 2,566	Engine number is on your id plate normally found on B pillar inside the door. mines on the passengers side. yours looks to be on the drivers side (since your steering wheel is on the wrong side)

11-28-2008, 07:47 PM	#15
CASTREX Who said Yaris was slow? View User's Garage Drives: Yaris T-Sport 2008 Join Date: Nov 2006 Location: Costa Rica Posts: 1,287	That looks like the 1L Not the 1.3L

11-29-2008, 06:22 AM	#17
eTiMaGo vroom vroom View User's Garage Drives: lil red 5-door Join Date: Sep 2006 Location: Bangkok, Thailand Posts: 7,744	He got it custom-made if I remember correctly... __________________ The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
$7 Ram air intake pictorial	turbodiesel	Performance Modifications	19	10-27-2008 06:46 PM
Intake Systems Decision Maker..	Blenjar	Performance Modifications	25	09-15-2007 11:07 PM
guess what I'm waiting for and how much I paid?	Ric n Sov's Vitz RS	General Yaris / Vitz Discussion	27	06-27-2007 08:36 PM
intake question and suggestions	Adriaan	Performance Modifications	2	01-31-2007 05:54 PM
Cold Air Intake vs. Short Ram Intake	nevermorez	Performance Modifications	1	01-24-2007 05:25 PM