Change handbrake handle? - Toyota Yaris Forums

mattvolp · 03-25-2011, 07:28 PM

Is it possible to change the factory handbrake handle on a Yaris Hatchback 1999-2003?

I'm not with the car at the moment, so if someone could just tell me?

Thanks.

az_saguaro · 04-04-2011, 01:36 AM

Yes, you can change it out with an aftermarket. The original is glued on extremely well and will take a lot of cutting to get it off. I have done it without any problems (I used a dremel and made quick work of it).

Nimbus17 · 04-09-2017, 06:51 PM

Hi everyone, there isn't very much out there on this. And thank you to az_saguaro for the reply. That's the conclusion i was coming to since i couldn't just slide it off or found any screws on the factory handle on my 2017 Yaris HB. I will later post before and after pics on how i went about removing the factory handle and put on a Sparco e brake handle! :)

03-25-2011, 07:28 PM	#1
mattvolp Drives: YARIS 1.0 16v VVTi GS Join Date: Mar 2011 Location: United Kingdom Posts: 3	Change handbrake handle? Is it possible to change the factory handbrake handle on a Yaris Hatchback 1999-2003? I'm not with the car at the moment, so if someone could just tell me? Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Yaris Oil Change DIY	rningonfumes	DIY / Maintenance / Service	91	01-11-2019 08:18 PM
Tutorial : Speaker Changing, Headlight Painting, Center Control Colour,Panel Removal	hasher22	DIY / Maintenance / Service	88	03-06-2014 07:40 AM
My Oil Change Help Me, Please!	JetfireK	General Yaris / Vitz Discussion	6	01-09-2011 11:25 PM
Pic of my new E-Brake handle	az_saguaro	Cosmetic Modifications (Exterior/Interior)	5	03-22-2010 10:48 AM
MJ dead	90tsi	Off-topic / Other Cars / Everything else Discussions	28	06-26-2009 03:20 PM

04-04-2011, 01:36 AM	#2
az_saguaro What to Mod Next? Drives: 2008 3Dr HB, Bayou Blue Join Date: Oct 2009 Location: U.S. AZ Posts: 22	Yes, you can change it out with an aftermarket. The original is glued on extremely well and will take a lot of cutting to get it off. I have done it without any problems (I used a dremel and made quick work of it).

04-09-2017, 06:51 PM	#3
Nimbus17 I've made a post! View User's Garage Drives: Manual-2017YarisHBMagneticGrey Join Date: Mar 2017 Location: Middle of Canada Posts: 1	Hi everyone, there isn't very much out there on this. And thank you to az_saguaro for the reply. That's the conclusion i was coming to since i couldn't just slide it off or found any screws on the factory handle on my 2017 Yaris HB. I will later post before and after pics on how i went about removing the factory handle and put on a Sparco e brake handle! :)