front door trim removal - Toyota Yaris Forums

kevinj93 · 10-19-2016, 05:44 PM

Hi All,

I'm getting my new driver's door mirror back from the painter this afternoon. the old one was smashed by a truck.

Any hidden screws to be aware of for the trim removal? The door armrest has switches for central locking and power windows.

NYC-SE · 10-19-2016, 08:51 PM

There are 3 screws holding the door card to the door frame. One is under the round tab in the door handle cutout. The other 2 can be accessed by prying up on the door armrest. The armrest will pop out. Remove the plugs going to the window and door switches. You should then see the other 2 screws. After removing them pry around the edge of the door card. You will feel when it snaps out of the clips. Then lift door card up.

Then you will see 3 bolts holding the mirror to the door frame. There will probably be some wiring going to the mirror that will have to be disconnected and transferred over.

When putting everything back make sure you reattach the ball end of the cable for the door release. There is a thread here about someone who forgot to do that and is now locked out of his car. Good luck.

kevinj93 · 10-19-2016, 11:15 PM

Thanks for the information NYC-SE.

I got the door trim off, the new mirror fitted, and the door trim back on in 15 minutes taking my time.

Thanks for the warning about the door lock cable. It didn't come adrift, but I double checked before puttind the trim back on.

10-19-2016, 05:44 PM	#1
kevinj93 Drives: 2013 NCP130 Join Date: Nov 2015 Location: Sydney, Australia Posts: 386	front door trim removal Hi All, I'm getting my new driver's door mirror back from the painter this afternoon. the old one was smashed by a truck. Any hidden screws to be aware of for the trim removal? The door armrest has switches for central locking and power windows. __________________ Running on standard AU 14" steel wheels (14x5 rims, 175/70R14 tyres). Added reversing camera and touch screen radio, cruise control, 16" rear wiper blade, tow bar and dash cam.

10-19-2016, 11:15 PM	#3
kevinj93 Drives: 2013 NCP130 Join Date: Nov 2015 Location: Sydney, Australia Posts: 386	Thanks for the information NYC-SE. I got the door trim off, the new mirror fitted, and the door trim back on in 15 minutes taking my time. Thanks for the warning about the door lock cable. It didn't come adrift, but I double checked before puttind the trim back on. __________________ Running on standard AU 14" steel wheels (14x5 rims, 175/70R14 tyres). Added reversing camera and touch screen radio, cruise control, 16" rear wiper blade, tow bar and dash cam. Last edited by kevinj93; 10-20-2016 at 03:38 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
09 Stock HU - front and rear AUX in?	azeeroth	In Car Entertainment + Electronics (audio / video / alarm)	1	08-10-2012 11:37 AM
What do you think? painting the front of a Yaris hb front bumper black like the GTI	Rnankoo	Cosmetic Modifications (Exterior/Interior)	15	08-23-2009 06:49 AM
Front spoiler	koolerking	Australia	3	07-20-2009 09:10 PM
Front bra for S model Sedan?	N9QGS	DIY / Maintenance / Service	2	06-27-2009 09:51 PM
Displaying Front Plate In CA	hans_fh	California	42	10-22-2008 01:57 AM

10-19-2016, 08:51 PM	#2
NYC-SE Drives: 2014 Yaris SE Join Date: Apr 2014 Location: NYC Posts: 1,079	There are 3 screws holding the door card to the door frame. One is under the round tab in the door handle cutout. The other 2 can be accessed by prying up on the door armrest. The armrest will pop out. Remove the plugs going to the window and door switches. You should then see the other 2 screws. After removing them pry around the edge of the door card. You will feel when it snaps out of the clips. Then lift door card up. Then you will see 3 bolts holding the mirror to the door frame. There will probably be some wiring going to the mirror that will have to be disconnected and transferred over. When putting everything back make sure you reattach the ball end of the cable for the door release. There is a thread here about someone who forgot to do that and is now locked out of his car. Good luck.