|
|
05-22-2009, 03:12 AM | #1 |
Drives: ings 09 Yaris 3 Door LiftBack Join Date: Mar 2009
Location: SF, CA
Posts: 465
|
Finally...Bride Racing Seat Installed
Thanks Malaya1121 for all the helps
Recaro Slider & Wedge Engineering Custom Bracket.. Will take some more pic tomorrow |
05-22-2009, 03:14 AM | #2 |
Drives: ings 09 Yaris 3 Door LiftBack Join Date: Mar 2009
Location: SF, CA
Posts: 465
|
Finally
I even bought these seats before I get the Yaris
__________________
REAL JDM ings+1 Full Body Kit…REAL JDM C-One Spoiler…Retrofit Projector Headlight…Kiddo 6-pots BBK…CE 28N J-Time Attack…Bride Ergo II Racing Seat…Personal Steering Wheel…Work Bell Quick Release…Dealer Option Sun Roof…JDM RS LED Side Mirror…JDM RS Taillight…C-One Oil Cap…C-One Radiator Cap…TRD Iridium Racing Spark Plug…Tom's Fuel Map Controller…Blitz throttle controller…GReddy Informeter Touch…MR Suspension…TRD Rear Sway Bar…MR C-Pillar Bar…GTspec Front Strut Bar & Rear Strut Bar…AFE Intake…WR Header…Nitto Mid-Pipe…Greddy Ti-C axleback…Goodridge SS Brake Line… To do: Supercharger… |
05-22-2009, 03:16 AM | #3 |
Drives: ings 09 Yaris 3 Door LiftBack Join Date: Mar 2009
Location: SF, CA
Posts: 465
|
However, the passenger side air bag & seat belt light keep blinking.....
My solution is..... Anyone Can Help Last edited by AlainMikli; 05-22-2009 at 04:07 AM. |
05-22-2009, 03:20 AM | #4 |
Drives: Polar White Yaris HB Join Date: Dec 2008
Location: Honolulu
Posts: 263
|
Those seats look awesome! Any problem with fitment???
|
05-22-2009, 03:32 AM | #5 |
Drives: Polar White Yaris HB Join Date: Dec 2008
Location: Honolulu
Posts: 263
|
I wonder how to get past the passenger air bag and seat belt light. There must be a way of hooking up the sensors to work with the Bride seats.
|
05-22-2009, 04:06 AM | #6 | |
Drives: ings 09 Yaris 3 Door LiftBack Join Date: Mar 2009
Location: SF, CA
Posts: 465
|
Perfect
Quote:
I really want to know how to by pass the Weight Sensor & Passenger Side Air Bag That's what I can do right now |
|
05-22-2009, 03:52 AM | #7 |
アキバ製
Drives: 09' White LB, Celica GTS Join Date: Apr 2009
Location: Honolulu, HI
Posts: 524
|
Oh man I love your solution! thats was great. I laughed hard.
your seats are sick |
05-22-2009, 04:35 AM | #8 |
Where is Oahu?
|
niceee seats! install the controller let me know if you have any questions
|
05-22-2009, 12:55 PM | #9 | ||
Drives: ings 09 Yaris 3 Door LiftBack Join Date: Mar 2009
Location: SF, CA
Posts: 465
|
Quote:
may be Next week~ Quote:
__________________
REAL JDM ings+1 Full Body Kit…REAL JDM C-One Spoiler…Retrofit Projector Headlight…Kiddo 6-pots BBK…CE 28N J-Time Attack…Bride Ergo II Racing Seat…Personal Steering Wheel…Work Bell Quick Release…Dealer Option Sun Roof…JDM RS LED Side Mirror…JDM RS Taillight…C-One Oil Cap…C-One Radiator Cap…TRD Iridium Racing Spark Plug…Tom's Fuel Map Controller…Blitz throttle controller…GReddy Informeter Touch…MR Suspension…TRD Rear Sway Bar…MR C-Pillar Bar…GTspec Front Strut Bar & Rear Strut Bar…AFE Intake…WR Header…Nitto Mid-Pipe…Greddy Ti-C axleback…Goodridge SS Brake Line… To do: Supercharger… |
||
05-23-2009, 12:14 AM | #10 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
If you move the sensors over, you also have to move the Occupant Classification ECU, which is located under the front of the passenger seat. There is a calibration that a Toyota Tech can do with the Techstream tool to zero-out the system. Looking at the service manual and EWDs I believe you can bypass the sensors by supplying 0.2 VDC to the SIG1, 2, 3 ,and 4 terminals (on the 4 connectors that plug into the 4 Occupant Classification Sensors). Connector U1-U4: Conn U2 - Occupant Classification Sensor (Front LH).jpg Pin 1 - SVC Pin 2 - SIG Pin 3 - SGD PassOCCSensor.jpg The normal operating range for SIG is 0.2 to 4.7 VDC. If you connect up the 4 sets of resistors, theoretically the light should stop flashing (and I believe that this will be the Passenger Airbag Off mode). If the passenger airbag is on with the resistors in place, flip the 10K and 470 ohm resistors so that the 470 is connected from SVC to SIG and the 10K is connected from SIG to SGD. The service manual doesn't indicate if 0.2 V is empty seat reading or if 4.7 V is. Last edited by CTScott; 08-05-2009 at 11:30 PM. |
|
05-22-2009, 06:13 AM | #11 |
Drives: '14 GT86, '08 Vitz Join Date: Dec 2006
Location: Central Valley, CA
Posts: 9,873
|
Awesome seats!
|
05-22-2009, 08:55 AM | #12 |
Drives: 2007 Yaris Hatchback Join Date: Jul 2007
Location: Beaufort, South Carolina
Posts: 388
|
from what I remember, the passenger seat has a weight sensor in it, anything over that limit and the air bag light and seatbelt light goes off. removing the seat all together means you removed that sensor in the seat's bottom, and it probably needs to relay the signal. was there any connections you had to unplug while removing the original seat?
|
05-22-2009, 09:15 AM | #13 |
Drives: 2006 Mazda3 Sedan Join Date: Jun 2007
Location: Germantown, MD
Posts: 116
|
Does the Yaris have side-impact airbags that come out of the seat?
__________________
|
05-22-2009, 10:04 AM | #14 | |
Drives: Sc'd Yaris Sedan. Join Date: May 2007
Location: civilwar town.
Posts: 660
|
Quote:
Seats look great. Good luck with the weight sensor.
__________________
Tantum religio potuit suadere malorum. |
|
05-22-2009, 09:24 AM | #15 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
NICE -- what model BRIDES are those?
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
05-22-2009, 09:55 AM | #16 |
Drives: 2008 Yaris S Sedan Join Date: Apr 2009
Location: Oklahoma
Posts: 78
|
|
05-22-2009, 09:55 AM | #17 |
Drives: 2008 Yaris S Sedan Join Date: Apr 2009
Location: Oklahoma
Posts: 78
|
Where did you get them and how much did they cost???
|
05-22-2009, 12:50 PM | #18 |
Drives: ings 09 Yaris 3 Door LiftBack Join Date: Mar 2009
Location: SF, CA
Posts: 465
|
I bought it back from Hong Kong with a Super Awesome deal.....almost half price of the RSVP in US
driver Side : Eugo II Passenger : Xax II (Easy for passenger to get off)
__________________
REAL JDM ings+1 Full Body Kit…REAL JDM C-One Spoiler…Retrofit Projector Headlight…Kiddo 6-pots BBK…CE 28N J-Time Attack…Bride Ergo II Racing Seat…Personal Steering Wheel…Work Bell Quick Release…Dealer Option Sun Roof…JDM RS LED Side Mirror…JDM RS Taillight…C-One Oil Cap…C-One Radiator Cap…TRD Iridium Racing Spark Plug…Tom's Fuel Map Controller…Blitz throttle controller…GReddy Informeter Touch…MR Suspension…TRD Rear Sway Bar…MR C-Pillar Bar…GTspec Front Strut Bar & Rear Strut Bar…AFE Intake…WR Header…Nitto Mid-Pipe…Greddy Ti-C axleback…Goodridge SS Brake Line… To do: Supercharger… |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Clazzio Seat Cover DIY Install | PETERPOOP | DIY / Maintenance / Service | 31 | 09-10-2010 03:30 PM |
Rim Weights | bosbik | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 16 | 11-14-2009 06:42 PM |
Possible Group Buy.. Racing Seats, Intakes? | TinyGiant | Items for Sale by private party | 60 | 09-11-2009 02:40 PM |
Rostra seat heater and lumbar support | sesmith | In Car Entertainment + Electronics (audio / video / alarm) | 1 | 01-03-2009 08:51 AM |
12/20/08 Buddy Club USA 5th Anniversary Clearance SALE | DuckinOut | California | 3 | 12-18-2008 12:25 AM |