|
|
03-31-2007, 12:34 AM | #1 |
YRS WHOR
Drives: White 2007 Yaris E-Limited 5dr Join Date: Feb 2007
Location: Chiangmai, Thailand
Posts: 359
|
DIY: 10 minute engine bay detail
As requested, here's the 10 minute engine bay detail DIY
What you'll need: Image0.jpg
The obligatory before pic: Image1.jpg Step 1: Do this on a cool engine - if it's too hot the products applied will dry out too quickly. If you have an exposed aftermarket air filter you should wrap it in a plastic bag to keep the products used and water from getting into it. Spray the engine cleaner everywhere in the engine bay. Don't be shy with this stuff, and make sure you get it into all of the nooks and crannies. For a single detail I normally end up using about 250ml (8.5 fl oz) of the stuff. Step 2: Leave the engine cleaner to sink in for a couple of minutes, then hose it all off using normal garden hose pressure water. Be thorough. There's really nothing you need to concerned about when wetting in this engine, so long as you're using normal mains water pressure. Image2.jpg Step 3: After hosing it down, get your first rag and wipe off any excess water, then apply your tire shine or rubber conditioner. Don't spray this stuff on your belts. Image3.jpg Step 4: Let the tire shine / rubber conditioner sink in for a couple of minutes, then wipe the engine bay down using your second rag. Spray a little of your shine product onto the rag to help cover up any spots you might have missed. There's no need to get into every little nook and crannie here - just thin out the bulk of the product so you don't end up with blotches. Image4.jpg That's it, now sit back for another few minutes as the rest of the shine product dries off. Viola! Told you guys it was easy Here's a few after pics: Image5.jpg Image6.jpg Image7.jpg Last edited by Razr; 03-31-2007 at 01:05 AM. |
03-31-2007, 12:42 AM | #2 |
www.sebastienloeb.com
Drives: Citroën C4 & TOYOTA Yaris Join Date: Feb 2007
Location: Switzerland
Posts: 36
|
ur pics are not shown.
__________________
http://www.sebastienloeb.com/ |
03-31-2007, 12:56 AM | #3 |
YRS WHOR
Drives: White 2007 Yaris E-Limited 5dr Join Date: Feb 2007
Location: Chiangmai, Thailand
Posts: 359
|
Ooops! Should be working now.. Thanks
|
03-31-2007, 01:00 AM | #4 |
Drives: 03 Toyota Corolla S modded, Join Date: Jan 2007
Location: LAS VEGAS, NV
Posts: 221
|
DAMN! THOSE ARE NEAT! YOU SHOULD WORK FOR TOYOTA....
__________________
THE YARIS: TINY BUT PRICEY! BUT YOU JUST GOTTA LOVE IT.... |
03-31-2007, 01:28 AM | #5 |
Banned
Drives: LB Join Date: Jul 2006
Location: OH
Posts: 7,787
|
I'll give this a shot with the Meguiars. I use it on my interior too.
|
03-31-2007, 08:09 AM | #6 |
YRS WHOR
Drives: White 2007 Yaris E-Limited 5dr Join Date: Feb 2007
Location: Chiangmai, Thailand
Posts: 359
|
|
03-31-2007, 10:09 AM | #7 |
Banned
Drives: 2007 Yaris LB Join Date: Mar 2007
Location: Orange County, Calif
Posts: 284
|
Great Tutorial! Thanks for taking the time!!!
|
03-31-2007, 02:37 AM | #8 |
sexy..
-- Blen
__________________
http://www.360voice.com/tag/noobblenjar My Car http://www.yarisworld.com/forums/showthread.php?t=4245 My DJ www.PainlessWolf.com |
|
03-31-2007, 03:03 AM | #9 |
www.sebastienloeb.com
Drives: Citroën C4 & TOYOTA Yaris Join Date: Feb 2007
Location: Switzerland
Posts: 36
|
Look awesome, but are you sure its ok to hose the whole engine bay with water? what bout the battery, and electrical stuffs?? will they be damaged? how long of a period have you done this on cars? looks really awesome, i would love to try but scare of the electrical parts.
__________________
http://www.sebastienloeb.com/ |
03-31-2007, 07:49 AM | #10 | |
der Zeck
Drives: '05 Audi A4 1.8t quattro Join Date: Sep 2006
Location: Toledo, OH
Posts: 5,231
|
Quote:
__________________
|
|
03-31-2007, 01:14 PM | #11 |
www.sebastienloeb.com
Drives: Citroën C4 & TOYOTA Yaris Join Date: Feb 2007
Location: Switzerland
Posts: 36
|
STOP BEING A LIL PUNK, if i want to ask questions, i m going to ask. non of ur business
__________________
http://www.sebastienloeb.com/ |
03-31-2007, 02:28 PM | #12 |
Drives: 03 Toyota Corolla S modded, Join Date: Jan 2007
Location: LAS VEGAS, NV
Posts: 221
|
I've done this on my 2003 Corolla with no engine cover "it has the plug wires open"
and I just bathe it with the engine degreaser I bought for 2 bucks, and rinsed it off with a garden hose, until its clean and I wiped it off with a rag,then I just sprayed the bay with armor all tire-foam, then I drove it off to evaporate and kinda seal the shine also it takes out the excess water with the G's your car creates...
__________________
THE YARIS: TINY BUT PRICEY! BUT YOU JUST GOTTA LOVE IT.... |
03-31-2007, 05:03 AM | #13 |
vroom vroom
Drives: lil red 5-door Join Date: Sep 2006
Location: Bangkok, Thailand
Posts: 7,744
|
The stock engine electricals should not be a problem, only think I am worried about is the extra stuff like grounding wires. Although, if they're halfway decent, they should not be prone to rusting...
__________________
The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ... |
03-31-2007, 05:12 AM | #14 | |
YRS WHOR
Drives: White 2007 Yaris E-Limited 5dr Join Date: Feb 2007
Location: Chiangmai, Thailand
Posts: 359
|
Quote:
As you noted, any decent quality grounding kit will have it's exposed metal surfaces plated in gold or nickel for corrosion resistance. The fumes that come of your battery pose a much higher risk of promoting corrosion than H2O in any case |
|
03-31-2007, 05:05 AM | #15 |
YRS WHOR
Drives: White 2007 Yaris E-Limited 5dr Join Date: Feb 2007
Location: Chiangmai, Thailand
Posts: 359
|
You won't have a problem with the electrics in the Yaris, as the only exposed potential your water might get in contact with is 13.8VDC and anything sensitive to water is encased with well implemented Ingress Protection (e.g. coil-over plugs, ECU etc).
Have been doing it this way for 15 years on 11 different vehicles, never a problem. |
04-02-2007, 09:22 AM | #16 | |
Drives: LB-Auto-PWR-ABS-Cruise-Springs Join Date: Aug 2006
Location: Richmond, VA
Posts: 1,065
|
Quote:
__________________
Other car is a 2005 Mustang Convertible 4.0L V6 Manual - Legend Lime Get YarAss in gear! RIP - Casey Tatum |
|
04-02-2007, 09:41 AM | #17 |
Lil White her name is ~
Drives: White YRX 5DR Hatchback 2006 Join Date: Dec 2006
Location: Gold Coast/Brisbane, Queensland, Australia
Posts: 268
|
I want to do this with my friend's Camry Sportivo 2003 ~ Is it ok to the the exact same thing ~
Damn the water restrictions here ~ I will have to take it to a commercial car wash with the sprays ~ Yes, I will make sure it's on low pressure ~ About watching out for the belts and others.....how do I "look" out for them or know if I'm getting them sprayed or not ~ I will be doing this to my Yaris too ^_^ ~ Though one person can not drive two cars so I will have to take it to the commercial car wash separately ~ I DON'T LIKE WATER RESTRICTIONS ~ Jaspie ~ |
03-31-2007, 10:24 AM | #18 |
Drives: Yaris 2006, 2NZFE 1.3L Join Date: Sep 2006
Location: Saudi Arabia
Posts: 53
|
nice & clean!
__________________
|
|
|