|
|
11-25-2008, 01:36 PM | #1 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
cross brace installed [pics]
Finally got around to putting this in. I figure I sell it, I better know what it does first hand. Had to trim my custom audio box back a little, but otherwise it fit well. Didn't use the bottom bar, I didn't see that it did anything to stiffen the system.
This cross brace makes a BIG difference! Somehow, even in straight line driving the rear end "sits down" better over bumps. Didn't expect that. A few pics for you. It bolts directly into the upper rear seatbelt hole and into the rear seat bracket on the bottom.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
11-25-2008, 01:44 PM | #2 |
それを吸ってください
|
Garm,
Is this brace adjustable? Looking at the threads and the nut, I'd assume so. |
11-25-2008, 01:46 PM | #3 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
yes it is, in both angle and distance. Mostly it's lining up the holes and then cinching the whole thing down nice and tight.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
11-25-2008, 01:49 PM | #4 |
What will a brace like this do differently than mid and rear underbraces on the car?
|
|
11-25-2008, 01:48 PM | #5 |
それを吸ってください
|
If someone wanted to, they could replace the panels if they made the hole in them and put them on before locking it in, just a thought for the potential buyer.
|
11-25-2008, 01:52 PM | #6 |
HISTORY REPEATED 11/04/08
|
What is the price on these again?
|
11-25-2008, 01:53 PM | #7 |
それを吸ってください
|
My guess is chassis and body flex combined, The underbraces are targeting the frame flex
|
11-25-2008, 02:03 PM | #8 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
chassis flex mostly -- I think you'll feel much more of a difference with this than underbracing, which basically overlays a single piece underbody anyway.
This can be installed with the back seats in place, I'm hoping Thomas can find his pre-hack pics and post them up. I'm updating the store now to reduce the price to $399 with FREE shipping included. I have two left.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
11-25-2008, 11:03 PM | #9 |
I used to have 1700 posts
|
NEW LOW PRICE! ONLY 2 LEFT! if you sold out when would u have more? who makes these?
|
11-25-2008, 02:56 PM | #10 |
それを吸ってください
|
So "yes" it can be installed with the back seats?. Nice!
|
11-25-2008, 03:58 PM | #11 |
Start another Oil Thread!
|
very nice brace! and mod power too!
|
11-25-2008, 04:04 PM | #12 |
QUACK~!!!!!
|
looks nice ... i like it
__________________
" ... I don't follow, thus i reign SUPREME . The only time i follow is when i follow my dreams ... " |
11-25-2008, 11:12 PM | #13 |
vroom vroom
Drives: lil red 5-door Join Date: Sep 2006
Location: Bangkok, Thailand
Posts: 7,744
|
looks awesome, serves its purpose, what's not to like?
These can be indeed installed with the rear seats, I have seen plenty of pics, I'll have to dig them up later
__________________
The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ... |
11-25-2008, 11:17 PM | #14 |
Parallel Parking Pro
|
I think it'd be heaps better if it was welded into the bodyshell.
__________________
Leong's NCP91 Toyota Yaris E Hankook V12 Evo 195/55/15 on Buddy Club P1 replicas 15x7 ET +38 Stebel horns, Philips Silvervision turn indicator bulbs TTE Lowering Springs, Camber bolts TRD Blue brake pads Fujitsubo Super Wagolis axleback exhaust DC Sports header |
11-25-2008, 11:18 PM | #15 |
それを吸ってください
|
True, but it's designed for the DIY guy/gal in mind
|
11-25-2008, 11:51 PM | #16 | ||
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
Quote:
Quote:
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
||
11-26-2008, 12:28 PM | #17 |
I used to have 1700 posts
|
i think you know what i'll be asking next
|
11-26-2008, 07:35 PM | #18 |
Your mom goes to college
Drives: 08 Vitz Join Date: Oct 2008
Location: Just chillin' out brah !
Posts: 1,434
|
Heres a couple quick pictures of my install , not fully finished yet. Need to trim the interior pieces to clear the seatbelt mounting hardware and make a flat cover out of thin plywood to cover the spare tire hole. Fits good but needed to cut a piece of metal out of the spare tire area to clear the bottom bar . I had an old megan c-pillar bar I added to the top of the "X" for more "mad tight jdm looks" lol . This was able to be installed with the rear seat in place BUT It will not sit all the way back meaning , it won't click into place and might collapse on the back seat passenger in a crash , be warned . It really stiffend the whole car up , its feels a lot harsher on bumps and slides the back out pretty good under tight, sharp, fast turns , I never thought it would make such a differnce. I'll do a full write up with better pictures when i'm done with the install.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
new goodies installed [pics] | cali yaris | Cosmetic Modifications (Exterior/Interior) | 55 | 09-19-2010 06:06 PM |
Who has installed Megan Coilovers? | Thirty-Nine | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 103 | 03-01-2010 06:50 AM |
2001 Toyota Vitz RS Front Strut Brace | mistervitz | General Yaris / Vitz Discussion | 7 | 10-23-2008 12:36 PM |
Installed the Tanabe Strut bar but had to remove my ground wire kit.. | vacantj | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 6 | 10-01-2007 01:56 PM |
Kaminari kit installed [pics] | cali yaris | Cosmetic Modifications (Exterior/Interior) | 46 | 08-23-2007 02:57 AM |