need pinout of ignition switch - Toyota Yaris Forums

mikenacarato · 12-23-2008, 07:07 AM

i was wondering if someone could tell me what the pinout of the ignition switch is. i have looked at the connector and see it has 6 wires running to it. what is each wire?

thanks!

eTiMaGo · 12-23-2008, 08:33 AM

there's actually 7 wires? I looked into that, they connect in weird ways at each stage (ACC-ON-START)... look at the engine control PDF on www.etimago.com/yaris/repairmanual , page ES-249

mikenacarato · 12-23-2008, 01:49 PM

i looked at my plug last night and spot # 3 and spot where #8 would be are empty. and 7 (black wires) have 2 wires running into that same hole. how can i tell what color is what in that diagram? lol

CTScott · 12-23-2008, 04:29 PM

Quote:

Originally Posted by mikenacarato

i looked at my plug last night and spot # 3 and spot where #8 would be are empty. and 7 (black wires) have 2 wires running into that same hole. how can i tell what color is what in that diagram? lol

The 09 pinout and colors are a bit different than the 07 and 08:

Yellow - Switched +12 VDC
Pink - Ignition
Green - Start
White - Accessory

mikenacarato · 12-23-2008, 05:35 PM

thanks a ton!

mikenacarato · 12-25-2008, 02:58 AM

is there a constant 12V here or do i tap into it elseware?

CTScott · 12-25-2008, 11:17 AM

Quote:

Originally Posted by mikenacarato

is there a constant 12V here or do i tap into it elseware?

Constant 12V is best gotten off of the fuse panel. Look at the red wire in this picture. Use a 1/4" female spade to connect to the top one of the two terminals.

12v.jpg

IsLNdbOi · 12-25-2008, 04:55 AM

Someone really needs to upload the '09 service manual and other '09 related files here.

CTScott · 12-25-2008, 11:20 AM

Quote:

Originally Posted by IsLNdbOi

Someone really needs to upload the '09 service manual and other '09 related files here.

I will eventually. I subscribed to TIS for one day and grabbed all of the EWD's and about 90% of the rest of the 09 service manual. I just need to convert the EWD's from the .svgz format (readable to Adobe Illustrator) to PDF so all can open them and combine the 1000+ separate documents into smaller groups. I had to print each small section (2-3 pages each) to pdf from the TIS site.

12-23-2008, 07:07 AM	#1
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	need pinout of ignition switch i was wondering if someone could tell me what the pinout of the ignition switch is. i have looked at the connector and see it has 6 wires running to it. what is each wire? thanks!

12-23-2008, 08:33 AM	#2
eTiMaGo vroom vroom View User's Garage Drives: lil red 5-door Join Date: Sep 2006 Location: Bangkok, Thailand Posts: 7,744	there's actually 7 wires? I looked into that, they connect in weird ways at each stage (ACC-ON-START)... look at the engine control PDF on www.etimago.com/yaris/repairmanual , page ES-249 __________________ The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY - Bypassing Tire Pressure Warning System (TPWS / TPMS)	CTScott	DIY / Maintenance / Service	221	07-16-2025 02:20 AM
DIY (08' USDM LB): Interior Light Color Change	revnull	DIY / Maintenance / Service	37	05-21-2016 01:59 PM
New Foglights with Wireless PILOT switch	Rotorheader	DIY / Maintenance / Service	3	08-11-2007 12:03 PM
replacement fog light switch?	yrsdrgn	Cosmetic Modifications (Exterior/Interior)	4	07-17-2007 05:11 PM
Ignition switch heats up	kurokoma-kun	General Yaris / Vitz Discussion	11	06-19-2007 03:53 PM

12-23-2008, 01:49 PM	#3
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	i looked at my plug last night and spot # 3 and spot where #8 would be are empty. and 7 (black wires) have 2 wires running into that same hole. how can i tell what color is what in that diagram? lol

12-23-2008, 05:35 PM	#5
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	thanks a ton!

12-25-2008, 02:58 AM	#6
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	is there a constant 12V here or do i tap into it elseware?

12-25-2008, 04:55 AM	#8
IsLNdbOi Drives: Polar White - 5 Door '09 LB Join Date: Aug 2006 Location: Las Vegas, NV Posts: 1,285	Someone really needs to upload the '09 service manual and other '09 related files here.