Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > In Car Entertainment + Electronics (audio / video / alarm)
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 05-20-2009, 09:45 AM   #1
vten
 
Drives: red bare bone yaris hb 3dr
Join Date: May 2009
Location: columbus
Posts: 1,022
need guidance for the compustar 2W900FMR install

http://www.compustar.com/products/2W900FMR.htm


I just got the compustar 2W900FMR remote start with the FT-5000AS module . anyone can help me with the install or a DIY ?? I also bought the door actuators with the 2 wires.....

a local store quote me $350 for the install above....

thanks guys
vten is offline   Reply With Quote
Old 05-20-2009, 10:02 AM   #2
sqcomp
Roadrunner Jr.
 
sqcomp's Avatar
 
Drives: 2007 Yaris S
Join Date: Jan 2007
Location: Back at home
Posts: 2,609
Send a message via AIM to sqcomp
It just so happens that I'll be at the shop today prepping for, if not actually installing, my Autoppage RS1000 alarm...

While I'm not familiar with the ideosynchracies of the Yaris in an alarm install yet, I have good people around me that know a hell of a lot more than I do...

With that being said, I can have them look at the questions you have about the install if you'd like. So, throw some questions my way and I'll see if I can answer them.
__________________
“To argue with a person who has renounced the use of reason is like administering medicine to the dead.”
― Thomas Paine
sqcomp is offline   Reply With Quote
Old 05-20-2009, 10:16 AM   #3
vten
 
Drives: red bare bone yaris hb 3dr
Join Date: May 2009
Location: columbus
Posts: 1,022
thanks sqcomp,

I need the wiring guidance for the specific alarm if it's possible so I can save a little $$ for another project .

I search a couple diy alarm/ remote install on the forum, but I just want to double check beforehand.

thanks a lot.
vten is offline   Reply With Quote
Old 05-20-2009, 12:28 PM   #4
sqcomp
Roadrunner Jr.
 
sqcomp's Avatar
 
Drives: 2007 Yaris S
Join Date: Jan 2007
Location: Back at home
Posts: 2,609
Send a message via AIM to sqcomp
I think I can get you the diagrams...

Give me a couple hours or so.

I'm going to assume you have an... 09 3 door?

This may also help for right now:

http://www.etimago.com/yaris/repairmanual/
__________________
“To argue with a person who has renounced the use of reason is like administering medicine to the dead.”
― Thomas Paine
sqcomp is offline   Reply With Quote
Old 05-20-2009, 03:33 PM   #5
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
I installed an UltraStart remote starter and a in my 09 5 door (and we put a Valet in SodiumDuck's 08 3 door at the same time). I was going to put together a DIY, but never got around to it. My 09 had the engine immobilizer, so I use the Fortin KEY-OVERRIDE-SL2 transponder key bypass module (which doesn't require a sacrificial key).

Let me know if you have any questions.

Here are a couple of threads with info:

Keyless Entry DIY:
http://www.yarisworld.com/forums/sho...anq+diy+remote

Correction on Lock/Unlock Wires:
http://www.yarisworld.com/forums/sho...9&postcount=18
CTScott is offline   Reply With Quote
Old 05-20-2009, 07:03 PM   #6
vten
 
Drives: red bare bone yaris hb 3dr
Join Date: May 2009
Location: columbus
Posts: 1,022
it's a 08 3dr , manual everything...

thanks guys for helping me out ....I really appreciate it ...I have all day tomorrow to install the alarm and the door actuator ( 2 wires one ) ....I wish my universal power window would be here too so I can do it all at once ...

Tan
vten is offline   Reply With Quote
Old 05-20-2009, 08:43 PM   #7
vten
 
Drives: red bare bone yaris hb 3dr
Join Date: May 2009
Location: columbus
Posts: 1,022
......bare with me here:P ....

on the door actuator with 2 wires .. one dark green and one dark blue ....where are they supposed to connect ??
vten is offline   Reply With Quote
Old 05-20-2009, 09:09 PM   #8
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
Quote:
Originally Posted by vten View Post
......bare with me here:P ....

on the door actuator with 2 wires .. one dark green and one dark blue ....where are they supposed to connect ??
Green is lock, blue is unlock. They require positive pulses and typically draw too much current to drive directly from a remote starter/keyless entry system.

Here's an example of wiring for them. The lock and unlock pulse connections would go to the appropriate terminals of the remote starter/keyless entry system.

http://www.commandoalarms.com/doorlockactuators.pdf
CTScott is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Compilation of Yaris How-tos/DIYs YarisBueller DIY / Maintenance / Service 39 04-28-2018 09:47 AM


All times are GMT -4. The time now is 04:37 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.