 |
 |
|
|
|
|
06-02-2009, 03:33 PM
|
#1 |
 Drives: 1.0 vvti 2001 Join Date: May 2009
Location: huddersfield
Posts: 3
|
head bolt socket. What size?
having established very poor compression on misfiring cylinder, I'm buying low mile head. I've sourced gasket set and should be able to get head bolts locally but want to order socket for these at same time. Is it 8mm 12 point? and is it particular to toyota? cheers
|
|
|
|
06-02-2009, 03:38 PM
|
#2 |
 
|
yes sir, appears to be a 12pt 8mm. i recollect using a torx when i pulled my head.
T50 IIRC
__________________
Been a long time messing with cars.. |
|
|
|
|
06-02-2009, 03:43 PM
|
#3 |
|
|
 pardon the awful picture, yes, 12pt, 8mm by my dial caliper measurement
__________________
Been a long time messing with cars.. |
|
|
|
|
06-02-2009, 05:15 PM
|
#4 |
|
Drives: 1.0 vvti 2001 Join Date: May 2009
Location: huddersfield
Posts: 3
|
thanks guys , my local factors stock this I think!
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Changing LED's In Projector Head Lights | whooppee777 | Cosmetic Modifications (Exterior/Interior) | 16 | 03-01-2009 03:07 PM |
| The Infamous 24mm socket??? | marcus | DIY / Maintenance / Service | 13 | 02-09-2009 07:39 PM |
| Transmission Drian Bolt washer size | CB900F2 | DIY / Maintenance / Service | 14 | 12-07-2008 08:03 AM |
| Req: Head unit suggestions. | xed | In Car Entertainment + Electronics (audio / video / alarm) | 21 | 08-09-2007 08:38 PM |
| Exhaust Pipe Size (Tamaņo del tubo de escape) | carlosh | Central and South America | 11 | 08-02-2007 05:15 PM |
Hybrid Mode
