New Alpine Type-R subwoofer

[Alien Mantis]

The new 2010 Type-R subs look nice!

http://www.alpine-usa.com/product/view/swr-1043d/

[why?]

man, and on the cheaper side too!

[Palmer812]

We just got these in yesterday. I was so busy I didn't open one up and check it out. Looks good.

[Alien Mantis]

Originally Posted by Palmer812

We just got these in yesterday. I was so busy I didn't open one up and check it out. Looks good.

Take some pics for us!

[Palmer812]

Originally Posted by Alien Mantis

Take some pics for us!

I am at work now but no camera handy. I'll try to remember to bring one tomorrow.

[Palmer812]

DSCI0188.jpg

DSCI0190.jpg

DSCI0189.jpg
Here you go.

[The Architect]

hmm, I'm skeptical but they're slightly sexier with the tech talk to back it up (At least from Alpine)

170 shipped each on ebay isnt too bad but I wanna see real world differences and results before I buy 3 new ones and a 2000 watt amp to match the new specs.

[Palmer812]

Architect just drive to NC and I will let you put them in your car and try them out.

[Alien Mantis]

Originally Posted by The Architect

hmm, I'm skeptical but they're slightly sexier with the tech talk to back it up (At least from Alpine)

170 shipped each on ebay isnt too bad but I wanna see real world differences and results before I buy 3 new ones and a 2000 watt amp to match the new specs.

Since you already have Type-R subs, I wouldn't get the new ones.

Can't be that much difference in sound quality.


The new ones are a little more shallow, and can handle a little more power.
( 100 more watts RMS )

I still like last years model Type-R subs.
My little 10" Type-R sounds great. I enjoy it more everytime I listen to it.
It's not overpowering, it sits nice in the mix.
Good strong bass. I'm glad I didn't get two of them.
One gets the job done.

If I didn't already have my Type-R sub, I would get one of the new ones.

[talnlnky]

thats cool that they are using, or came up with a new linear motor technology, and even added Dumax Charts for the Bl curve & Kms. However, that new motor doesn't really stay linear that long. It was flat for the first half of the x-max value (first 10mm)... then went to a normal Bl curve... and then eventually craped out at 17mm.

All in all, it should be a good sounding sub. Probably one of the lowest distortion subs that retails for under $200.

I haven't looked at the T/S specs yet... hopefully this thing isn't running a crazy high Qts value which would make it a large box woofer like the W7 or all the LMS motor woofers.

[The Architect]

ehhh thats one hell of a drive lol, ill keep it in mind.

[ezhacker1]

you can get 8% off with Bing on ebay. so $119.60 shipped.
I may have to get me one of these bad boys, waited long enough. Need a new amp and box tho. The one thing i hate about buying subs, need to make a box and i dont have the technical know how.

[Alien Mantis]

Originally Posted by ezhacker1

I may have to get me one of these bad boys, waited long enough. Need a new amp and box tho. The one thing i hate about buying subs, need to make a box and i dont have the technical know how.

Check the pre-made boxes at SonicElectronix.
They are CHEAP, and most have free shipping, too.

I bought a ported box for my Type-R, and it is very NICE.
$30 with free shipping. You can't beat it.

No need to worry about making your own box.

SonicElectronix has some nice AMPS for cheap too.
500watt RMS class D monoblocks for around $130.

http://www.sonicelectronix.com/item_...se+XA1200.html

http://www.sonicelectronix.com/item_...KAC-8105D.html

[swidd]

Is there any way to mount this beauty in the sides of the car, to keep all the space for cargo?

[Palmer812]

Guys, please don't rule out your local stereo shop. They CAN match or beat those prices. I know I can. And if you blow it up you can take it back and swap it out on the spot.

[Alien Mantis]

Originally Posted by Palmer812

Guys, please don't rule out your local stereo shop. They CAN match or beat those prices. I know I can. And if you blow it up you can take it back and swap it out on the spot.

Yeah, I agree.

I always talk about SonicElectronix, but that is only because I live in a small town that doesn't have any good local stereo shops.
We have five or six car audio shops here, and they all suck.

The cheapest I could get an Alpine Type-R sub in my town is at BestBuy, for $200 apiece.
No thanks.

All the shops in my town are WAY overpriced.... except ONE.
It's a mexican stereo shop, but they are kinda fishy.
I buy wire from the mexican shop, but that's it.

You go into a local shop, they have no customers, and you start looking at the prices of stuff:
$300 for a deck. $280 for a subwoofer. $320 for an amp. $110 for a 4ga wire kit. $120 for a subwoofer box. $220 for a set of components.
( and I'm not talking high-end stuff either )

No thanks. I'll pass.

If you have a local shop that has decent prices, and does good work, by all means, give them some business!
I just don't have any options where I live.
I either buy off the internet, or I don't have nice music in my car. Period.

[talnlnky]

a lot of the time audio shops will include the labor cost of installation into the price of the equipment. Most people don't know how to install, so this is good, they just have to pay a few dollars more for wire and connectors and they are set. For those that know how to install, the net can save a lot of money. However, having a shop warranty can not be beat if you have trouble. Amplifiers are the one thing i've had issues with, and would buy locally if they even came within 20% of the net price. I've never blown a sub (on accident), but i've popped a few amps in my time. Lucky for me I had warranty for 2 out of the three times.

acessories I usually buy locally too, unless I can find them on partsexpress.com. that is one of the coolest DIY website on the net for audio gear.

I'm all for supporting mom & pop local shops, but if a salesman starts feeding me ignorance as if it is the word of god, and are unwilling to listen to the real truth... I'm walking out the door. There are too many uneducated audio salespeople in this country. Sure they can offer most people some help, but to get my business your better not start lecturing me on something that I know more about than you. Blindly following manufacturers literature often will leave you with a very limited, and sometimes incorrect understanding of audio & electronics.

I guess to sum it all up... one of the biggest perks a shop can give over the net is advice and guidance, for me personally, few sales people can give me that... some installers can, however, they usually are busy in the bay, not on the show room floor.

on a side note, all of my speakers were purchased from small speaker companies. No brand names, in fact... 90% of my equipment in my install is based out of the Washington/B.C. area. Only my deck (which is Denon) isn't a regional company.

[Palmer812]

The shop I work at is different. We are a 7 store family owned business that has been around 30 years. We have decks starting at $69 for Sony and 4 ga. kits for $50 retail. We are also allowed to discount as we wish. We don't include install in our prices. Most manufacturers require us to tag equipment at retail prices but we can sale it as cheap as we want. I almost always match internet pricing because I am smart enough to know that making 10% on an item is better than no sale at all. The Alpine Type R subs are a good example. The 10" retails for $179.95 and you can get them for $130 ish online. That is still about a mark up. I can beat that price all day long. Long story short all of you have to drive to North Carolina from now on to buy ALL of your stereo equipment.