|
|
05-17-2010, 12:00 PM | #1 |
Drives: . Join Date: Apr 2007
Location: .
Posts: 1,828
|
16x8 Rims w 205/45/16
Hi sorry to sound like a noob, but does anyone know if this will work with out rubbing. 16X8 on 205/45/16. I've tried the search bar and i couldn't find anything. My car is lowered on Tigertecs. I was thinking about these just want to make sure i'm not going to have any fitment issues. Thanks for any help
|
05-17-2010, 12:25 PM | #2 |
toyota
Drives: 2007 Yaris RS Blazed Join Date: Oct 2006
Location: toronto, canada
Posts: 3,637
|
might work for the rear but not front..
|
05-17-2010, 12:37 PM | #3 |
Drives: . Join Date: Apr 2007
Location: .
Posts: 1,828
|
Damn!!!!! Can anyone confirm this. It's a good thing i didn't place my order. Yeah i was noticing that a lot of people are running 7 inch wide rims in the front.
|
05-17-2010, 12:50 PM | #4 |
Drives: '08 Yaris Join Date: Oct 2008
Location: Dover, Ohio
Posts: 7,606
|
Most likely will rub, but what is the offset?
|
05-17-2010, 01:07 PM | #5 |
Drives: . Join Date: Apr 2007
Location: .
Posts: 1,828
|
Uhhhhh I'm an offset idiot. I don't even know sorry
|
05-17-2010, 01:10 PM | #6 |
Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,762
|
^ should be listed in the wheel specs on whatever site it was you snagged the pic from. Offset number is going to be critical with these wheels.
__________________
|
05-17-2010, 01:14 PM | #7 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
can't answer the question without the offset -- it's the most important piece of information.
It is possible to fit those wheels to the Yaris, but it has to be done just right, and you will be needing some camber. |
05-17-2010, 01:53 PM | #8 |
8" and a lower offset will rub without camber.
I'm on 15x7 with +15 offset and I even poke a bit up front and rub a little on hard turns. But, if you want to put in some work with camber you can make it work. But like Garm said, wiith no offset specs it's impossible to say wether or not they'll fit..
__________________
|
|
05-17-2010, 03:00 PM | #9 |
Drives: . Join Date: Apr 2007
Location: .
Posts: 1,828
|
Here is what i found offset is 0
Specifications Wheel Size 16x8 Color Gun Metal Bolt Pattern 4-100/114.3 Offset 0 Lip Size 3.5" Required Lug Nuts Tuner Style |
05-17-2010, 03:06 PM | #10 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
+0 on a 16x8?
definitely POKE, you'd need a serious stretch tire to make that work. |
05-17-2010, 03:11 PM | #11 |
Drives: . Join Date: Apr 2007
Location: .
Posts: 1,828
|
so a 215 /45/16 tire wouldn't work then right? it would rub.
|
05-17-2010, 03:12 PM | #12 |
Drives: . Join Date: Apr 2007
Location: .
Posts: 1,828
|
I really don't mind if rims come a lil far out i'm more worried about it rubbing the cai or the fender liner
|
05-17-2010, 04:07 PM | #13 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
yeah you are probably looking at a 195 stretched to make that work.
|
05-17-2010, 06:46 PM | #14 |
JDM Fred
|
you would be better off with the 16x7 +38 version with a 205/50 or 205/45... though a 15x7 might look better, and would defiantly be lighter.
__________________
1990 Mazda Miata... I miss my Yaris |
05-17-2010, 10:17 PM | #15 |
Super Moderator
Drives: 2014 White VITZ Join Date: May 2007
Location: Huntington Bch, CA
Posts: 4,938
|
16x8, ET0, 195's? Good luck, mate! That'll be somewhere between tough and impossible to fit AND look right.
|
05-17-2010, 10:57 PM | #16 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
^ I think that stretch with ---camber would work. It's not a look I would go for, but that's not the point.
|
05-18-2010, 12:59 AM | #17 |
やりすぎだ~
|
Don't do it... unless you have Garm's fender flares
|
05-18-2010, 07:45 AM | #18 |
Drives: '08 Yaris Join Date: Oct 2008
Location: Dover, Ohio
Posts: 7,606
|
Herb, I'd stick to a 16x7 with +35 offset to +40 unless you want to do some major trial and error with tire sizes and rubbing.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WTB: 4 15" alloy rims | _Bravo_ | Willing to Buy by private party | 2 | 02-19-2010 06:39 PM |
Looking for 15 inch stock steel rims | hop | Canada | 2 | 01-21-2010 07:18 AM |
Rim Weights | bosbik | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 16 | 11-14-2009 06:42 PM |
Need help when ordering my tires and rims | thomasward00 | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 4 | 04-26-2007 09:40 PM |
hufeisen rims | JustYYaris | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 4 | 01-17-2007 03:16 PM |