pictures of the intercooler mounted and piping - Toyota Yaris Forums

turboyaris · 02-09-2007, 12:45 PM

Hey guys just posting to keep you guys updated. The process is coming along well, obviously as you guys have heard they have designed and released the axle-back exhaust. I just figured I would let you guys know that you can view a few pictures of the project by going to ZPI's website and clicking on their gallery section. My name is Nick Barsotti, so look for that in the customer car section. For those of you too lazy... http://www.zeropointindustries.net/gallery/nbarsotti
there is the link. They should be updating with more pics as the process comes along, and I will try to keep you guys updated with how its coming. And yes I know my car is a little dirty behind the front bumper, I had to drive 10 1/2 hours in the snow to get there so cut me some slack haha.

Doc Zaius · 02-09-2007, 01:31 PM

Looking good!

Can't wait to see it on the dyno!

Do you know what kind of turbo they're putting in? Is there a compression map available to look at?

Dezod · 02-09-2007, 01:53 PM

Quote:

Originally Posted by Doc Zaius

Looking good!

Can't wait to see it on the dyno!

Do you know what kind of turbo they're putting in? Is there a compression map available to look at?

Knowing ZPI, an EVO III 16G.

ZPIracing · 02-09-2007, 02:01 PM

Quote:

Originally Posted by Dezod

Knowing ZPI, an EVO III 16G.

actually we are thinking GT35R.. I think the ball bearing will help overcome the little displacment of the 1.5L.

ZPIracing · 02-09-2007, 02:05 PM

We would like to thank Nick for bringing us three pounds of salt with his car. It was awfully nice!!!

turboyaris · 02-09-2007, 02:31 PM

Hey thats salt from several different states... That's quality stuff.

Dezod · 02-09-2007, 03:48 PM

Quote:

Originally Posted by ZPIracing

actually we are thinking GT35R.. I think the ball bearing will help overcome the little displacment of the 1.5L.

You will put a 35R on a 1.5L and need to downshift 1-2 gears to get spool-up more than likely and only a 16G on the 2.4L 2AZFE? You've got to be kidding....

Nutzoids · 02-09-2007, 02:02 PM

OH GOD YES... I WANT IT... I WANT IT SO BAD...

FASTER... FASTER... GIVE IT TO ME... I NEED IT!

FASTER... I CAN'T TAKE IT ANYMORE... I'M GOING TO TURBO

TURBO ME! TURBO ME!

ahhh... now that's the stuff!

Russelt3hPirate · 02-09-2007, 03:52 PM

which 35R are you thinking about and isn't it a little pointless to buy a turbo capable of 30 psi if you only plan on running 5?

nester · 02-09-2007, 05:28 PM

After talking to turboyaris, we've decided on something slightly bigger. We'll overcome the lag with a direct port kit.

Russelt3hPirate · 02-09-2007, 05:33 PM

what internals are you going to be using for the 1nz?

turboyaris · 02-09-2007, 05:36 PM

Yea nester I like this turbo http://www.atpturbo.com/Merchant2/me...egory_Code=GRT I feel like having my car shred into tiny pieces... but just think a 1600HP yaris would be sick just hook the nitrous right to the turbine housing to spool it up. Think about it.... it'll be sick!!!

ZPIracing · 02-09-2007, 05:44 PM

Guys this is a preliminary pic of the controversial ZPIracing GT40R turbo for the new Toyota Yaris. As you can see the kit comes with an external 38mm wastegate and will include a vented hood to allow room for the piping. The kit will include external cameras and 7” Screen to allow safe driving due to the immediate vision obstruction caused by the abnormally large turbos.

We feel that you should see spool on this application in 7500rpm range.

Stay tuned to ZPIracing.net for updates on this exciting new product!!!

turboyaris · 02-09-2007, 07:03 PM

you guys have way too much time on your hands... you should be working on my car haha.

spkrman · 02-09-2007, 08:13 PM

Quote:

Originally Posted by ZPIracing

Guys this is a preliminary pic of the controversial ZPIracing GT40R turbo for the new Toyota Yaris. As you can see the kit comes with an external 38mm wastegate and will include a vented hood to allow room for the piping. The kit will include external cameras and 7” Screen to allow safe driving due to the immediate vision obstruction caused by the abnormally large turbos.

We feel that you should see spool on this application in 7500rpm range.

Stay tuned to ZPIracing.net for updates on this exciting new product!!!

HOT

dyno? 1/4? top secret vids?

nebulight · 02-10-2007, 11:02 AM

Quote:

Originally Posted by ZPIracing

Guys this is a preliminary pic of the controversial ZPIracing GT40R turbo for the new Toyota Yaris. As you can see the kit comes with an external 38mm wastegate and will include a vented hood to allow room for the piping. The kit will include external cameras and 7” Screen to allow safe driving due to the immediate vision obstruction caused by the abnormally large turbos.

We feel that you should see spool on this application in 7500rpm range.

Stay tuned to ZPIracing.net for updates on this exciting new product!!!

I don't think I want to buy a turbo kit from a company that can't even tell a 44mm wastegate from a 38mm

nester · 02-09-2007, 08:11 PM

Quote:

Originally Posted by Russelt3hPirate

what internals are you going to be using for the 1nz?

I'm assuming the pistons and rods for the xB/xA will work.

magoo_lc1 · 02-09-2007, 11:29 PM

WE roll the old reliable t3/t4 on a 1.3 with good results.

02-09-2007, 12:45 PM	#1
turboyaris Drives: 2007 Yaris Sedan Join Date: Jan 2007 Location: Southern New Jersey Posts: 459	pictures of the intercooler mounted and piping Hey guys just posting to keep you guys updated. The process is coming along well, obviously as you guys have heard they have designed and released the axle-back exhaust. I just figured I would let you guys know that you can view a few pictures of the project by going to ZPI's website and clicking on their gallery section. My name is Nick Barsotti, so look for that in the customer car section. For those of you too lazy... http://www.zeropointindustries.net/gallery/nbarsotti there is the link. They should be updating with more pics as the process comes along, and I will try to keep you guys updated with how its coming. And yes I know my car is a little dirty behind the front bumper, I had to drive 10 1/2 hours in the snow to get there so cut me some slack haha.

02-09-2007, 01:31 PM	#2
Doc Zaius Lurker supreme! View User's Garage Drives: old and boosted! Join Date: Nov 2006 Location: Ottawa, ON, Canada Posts: 792	Looking good! Can't wait to see it on the dyno! Do you know what kind of turbo they're putting in? Is there a compression map available to look at? __________________ 2006 Red Blitzed RS 5-door

02-09-2007, 11:29 PM	#18
magoo_lc1 Drives: honda civic hatch Join Date: Jan 2007 Location: missouri Posts: 144	WE roll the old reliable t3/t4 on a 1.3 with good results. __________________ 91 SE-R. R.I.P old freind The influence of peers on individual behavior illustrates the seductive power of conformity And, I don't mind at all being looked down upon by purists. Indeed I don't mind at all being looked down upon by those whom I do not look up to at

02-09-2007, 02:05 PM	#5
ZPIracing Drives: Scions Join Date: Feb 2007 Location: Louisville, KY Posts: 55	We would like to thank Nick for bringing us three pounds of salt with his car. It was awfully nice!!!

02-09-2007, 02:31 PM	#6
turboyaris Drives: 2007 Yaris Sedan Join Date: Jan 2007 Location: Southern New Jersey Posts: 459	Hey thats salt from several different states... That's quality stuff.

02-09-2007, 02:02 PM	#8
Nutzoids View User's Garage Drives: 07 Yaris Liftback Join Date: Nov 2006 Location: Philadelphia Posts: 938	OH GOD YES... I WANT IT... I WANT IT SO BAD... FASTER... FASTER... GIVE IT TO ME... I NEED IT! FASTER... I CAN'T TAKE IT ANYMORE... I'M GOING TO TURBO TURBO ME! TURBO ME! ahhh... now that's the stuff!

02-09-2007, 03:52 PM	#9
Russelt3hPirate l33t3st Asshole Drives: MY07 Yaris Liftback Join Date: Nov 2006 Location: Epcot Posts: 588	which 35R are you thinking about and isn't it a little pointless to buy a turbo capable of 30 psi if you only plan on running 5?

02-09-2007, 05:28 PM	#10
nester I made a post! Drives: 2006 Scion tC-t Join Date: Feb 2007 Location: ZPI Corporate HQ Posts: 21	After talking to turboyaris, we've decided on something slightly bigger. We'll overcome the lag with a direct port kit.

02-09-2007, 05:33 PM	#11
Russelt3hPirate l33t3st Asshole Drives: MY07 Yaris Liftback Join Date: Nov 2006 Location: Epcot Posts: 588	what internals are you going to be using for the 1nz?

02-09-2007, 05:36 PM	#12
turboyaris Drives: 2007 Yaris Sedan Join Date: Jan 2007 Location: Southern New Jersey Posts: 459	Yea nester I like this turbo http://www.atpturbo.com/Merchant2/me...egory_Code=GRT I feel like having my car shred into tiny pieces... but just think a 1600HP yaris would be sick just hook the nitrous right to the turbine housing to spool it up. Think about it.... it'll be sick!!!

02-09-2007, 05:44 PM	#13
ZPIracing Drives: Scions Join Date: Feb 2007 Location: Louisville, KY Posts: 55	Guys this is a preliminary pic of the controversial ZPIracing GT40R turbo for the new Toyota Yaris. As you can see the kit comes with an external 38mm wastegate and will include a vented hood to allow room for the piping. The kit will include external cameras and 7” Screen to allow safe driving due to the immediate vision obstruction caused by the abnormally large turbos. We feel that you should see spool on this application in 7500rpm range. Stay tuned to ZPIracing.net for updates on this exciting new product!!!

02-09-2007, 07:03 PM	#14
turboyaris Drives: 2007 Yaris Sedan Join Date: Jan 2007 Location: Southern New Jersey Posts: 459	you guys have way too much time on your hands... you should be working on my car haha.