FS: 1nzfe forged - Toyota Yaris Forums

Radou · 08-08-2012, 08:37 PM

hello! lately I buy a house which brings me to sell my engine. it breaks my heart to have to sell it but i dont have the choice. this is what the whole includes
CAN BE SOLD AS A PART OUT IF YOU INTERESTED PM ME
1nzfe at original size 75mm only honed
cp pistons with 9.0:1
Brian crower rods
toga main and rod bearing
Perrin fuel rail
custum t25 manifold
garret t25 from a s13 freshly rebuilded
vibrant oil feed line -4 an
vibrant valve covert vent
downpipe flange with v band clamp
felpro head stud
brand new water pump
brand new timing chain
brand new gasket (all)
brand new Thermostat
i have 3 mandrel bend for the exhaust
1x uj bend
1x 45 deg bend
1x 90 deg bend
compressor inlet flange
compressor outlet flange
glowshift boost gauge

posibility to sell the aem fic with this
some pictures !!!

like not having to do a part out but if i can sell all of my parts i will do one

my starting price 3000$ neg
all you'll have to buy is a clutch injectors and piping

i just want to sell this kit for buying me a set of coilover for lowering and pass to another project (my house)
any good offer will be accepted

i'm living in quebec canada posibility to ship via morneau transport or dicom and if i need to part out i gonna use another shipping companie

P.s. sorry for my bad english

BLITZEN · 08-10-2012, 05:32 PM

mmmm... interressant !

Combien de hp tu target avec ce setup la ?

Et la base est-tu closed deck ou open ?

thx

1.5 · 08-10-2012, 06:51 PM

Ugh I wish I could swap this thing in my sedan... I need a raise GLWS

cali yaris · 08-11-2012, 01:06 AM

I might bring this down here for someone that wants it.

What shop did the honing work and assembly?

This motor is built but never fired up?

fnkngrv · 08-11-2012, 06:55 PM

To me it is a great start...just wish that it was sleeved even though I know that it overkill for most folks. GLWS.

Radou · 08-19-2012, 04:53 PM

never fired up and the engine have been honed with a simple honing machine here in matane

Radou · 08-19-2012, 04:54 PM

not sleeved conservatory setup for 200 whp goal

Radou · 08-24-2012, 07:33 PM

can be sold as a part out

Radou · 09-02-2012, 06:02 PM

IN SALE AGAIN REASONABLE OFFER ARE ACCEPTED !!!

08-08-2012, 08:37 PM	#1
Radou Drives: yaris 09 ncp91 Join Date: Nov 2011 Location: Quebec canada Posts: 54	FS: 1nzfe forged hello! lately I buy a house which brings me to sell my engine. it breaks my heart to have to sell it but i dont have the choice. this is what the whole includes CAN BE SOLD AS A PART OUT IF YOU INTERESTED PM ME 1nzfe at original size 75mm only honed cp pistons with 9.0:1 Brian crower rods toga main and rod bearing Perrin fuel rail custum t25 manifold garret t25 from a s13 freshly rebuilded vibrant oil feed line -4 an vibrant valve covert vent downpipe flange with v band clamp felpro head stud brand new water pump brand new timing chain brand new gasket (all) brand new Thermostat i have 3 mandrel bend for the exhaust 1x uj bend 1x 45 deg bend 1x 90 deg bend compressor inlet flange compressor outlet flange glowshift boost gauge posibility to sell the aem fic with this some pictures !!! like not having to do a part out but if i can sell all of my parts i will do one my starting price 3000$ neg all you'll have to buy is a clutch injectors and piping i just want to sell this kit for buying me a set of coilover for lowering and pass to another project (my house) any good offer will be accepted i'm living in quebec canada posibility to ship via morneau transport or dicom and if i need to part out i gonna use another shipping companie P.s. sorry for my bad english Last edited by Radou; 08-24-2012 at 07:19 AM.

08-10-2012, 06:51 PM	#3
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	Ugh I wish I could swap this thing in my sedan... I need a raise GLWS __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

08-11-2012, 01:06 AM	#4
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	I might bring this down here for someone that wants it. What shop did the honing work and assembly? This motor is built but never fired up? __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

08-11-2012, 06:55 PM	#5
fnkngrv Mr. 155 and climbing View User's Garage Drives: Seriously Modded 07 Sedan Join Date: Jun 2006 Location: In The Hotbox Posts: 4,742	To me it is a great start...just wish that it was sleeved even though I know that it overkill for most folks. GLWS. __________________ Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing *Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes.*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replacing an 1NZFE by another 1NZFE ?	jenfre	DIY / Maintenance / Service	6	02-22-2021 12:38 AM
New Engine Management System offered for the 1NZFE	Dezod	Forced Induction Forum	51	06-16-2011 11:33 AM
Rim Weights	bosbik	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	16	11-14-2009 07:42 PM
1NZFE VS 4EFTE	Parmas	Performance Modifications	5	11-14-2009 12:34 PM
1NZFE K1 by Carrillo Rod interest list	xBoosted	Forced Induction Forum	20	01-20-2009 03:51 PM

08-10-2012, 05:32 PM	#2
BLITZEN Drives: 2008 yaris rs Join Date: Mar 2011 Location: montreal Posts: 29	mmmm... interressant ! Combien de hp tu target avec ce setup la ? Et la base est-tu closed deck ou open ? thx

08-19-2012, 04:53 PM	#6
Radou Drives: yaris 09 ncp91 Join Date: Nov 2011 Location: Quebec canada Posts: 54	never fired up and the engine have been honed with a simple honing machine here in matane

08-19-2012, 04:54 PM	#7
Radou Drives: yaris 09 ncp91 Join Date: Nov 2011 Location: Quebec canada Posts: 54	not sleeved conservatory setup for 200 whp goal

08-24-2012, 07:33 PM	#8
Radou Drives: yaris 09 ncp91 Join Date: Nov 2011 Location: Quebec canada Posts: 54	can be sold as a part out

09-02-2012, 06:02 PM	#9
Radou Drives: yaris 09 ncp91 Join Date: Nov 2011 Location: Quebec canada Posts: 54	IN SALE AGAIN REASONABLE OFFER ARE ACCEPTED !!!