|
|
01-24-2014, 02:10 AM | #1 |
Metsu
Drives: NCP91 ; E36 Join Date: Oct 2008
Location: Calgary
Posts: 154
|
DIY Retrofit Morimoto Mini H1 6.0 w/ XB LED Halo
Hey guys. Just wanted to post up a diy of my retrofit I did in my 2008 5 DR Liftback.
What I did was install a set of projectors, blacken out the headlights and install a halo behind the shroud. Difficulty and Review Moderate. Patience required. This took me about 6 hours to do as I took my time, listened to music. No tabs or clips were broken. This upgrade is huge over the halogen reflectors. Completely changed my perspective on night driving. Xenon highbeams are awesome and the light output is so great I don't even need high beams even on dark roads when I leave town. Only purpose of the high beams now is just to flash people who throw HIDs in their reflectors. All parts were purchased through The Retrofit Source http://www.theretrofitsource.com and those guys are really easy to deal with. They reply back within a day with any questions you may have and overall are one of the best, if not the best online vendor I have ever dealt with. I've had some issues with my first retrofit(older morimotos) and they shipped me out a new solenoid no problems at all. The great thing about them is that they stand behind their product. I go to them for all my retrofit needs. End Product Tools: A screw driver set. Primarily some philips(medium and large) and flat heads(small,medium and large), Pliers, Dremel w/ cutting disc, wire cutter/stripper, electrical stuff(tape, wires, taps, shrink), JB weld, JB steel stick, heat gun Components: Complete Mini H1 kit from TRS (includes everything you need) http://www.theretrofitsource.com/com...l#.UuH7ibTn-Uk Few things you'll need to select is a MotoControl Bixenon H4/9003 wire harness, New Sealant/Glue(if you choose not to reuse your old glue), 100mm Halos(if you choose to install halos behind Apollo 2.0 Shroud), 80mm (if you want to external mount on the included mini gatling gun shroud Apollo 2.0 Shroud http://www.theretrofitsource.com/com...l#.UuH-ErTn9hE Centric Rings http://www.theretrofitsource.com/acc...l#.UuH-fLTn9hE Tremclad Fast Dry Flat Black paint http://www.homedepot.ca/product/trmc...6g-aero/981147 The Process 1 Remove bumper partially or fully Heres a chart of how to remove the bumper. I didn't remove the entire thing. I just took off the top clips and fender clips and pulled the bumper back and that gave me enough space. The clips are easy to remove. Just use a small flat head to push the centers in to unlock and you can then just pull them out. There are 4 clips on top and 1 per fender. The bumper is held on the sides by the fender via tabs. Gently tug on the bumper edge in the wheel well and it should "pop" off each tab. Do that on both sides and the bumper will be free. 2 Remove Headlamps There are 3 bolts that hold the headlight. Use a philips large or medium size to unscrew. 1 bolt is on the top, 1 on the bottom inner, and 1 on the outer side. The headlamp can be wiggled out. Do not pull with force as you may damage or break one of the mount tabs. Once you have freed the headlamp, just undo all the bulbs. They are all twist off except the low/high beam bulb. That is plugged in. Unplug it and your lamp is free. 3 Bake your lamps Clean your lamps a bit. Get acquainted with where the tabs are located. Have large and medium sized flat heads ready. Preheat your oven to 210 F. Throw them in with the lense facing upwards. Let them bake for ~5-7 minutes. Wear gloves as they will be very warm. Start undoing the tabs with the flat head. I used a medium size to lift the tabs and the large one to separate the lense from the body. If it's really tough to seperate, throw it back in the oven for another 5 minutes. I didn't have any issues with mine so 5 was enough. Be gentle when using the flat heads as the plastic will be fairly soft. You don't want to break any tabs. 4 Trim Shroud and Test fit If you opted to go with the Apollo 2.0 Round shroud like me, it will be much too deep for the headlight and will need trimming. Test fit the projector with shroud to determine how much to trim. I cut about 3mm off. Test fit again to make sure it all fits nicely. 5 Paint Headlamp The paint I chose is a matte black. It's shade is pretty much the same as the black plastic. I painted the trim on the lense and the main reflector. Detach the top signal reflector. It is just clipped in so just tug on it and it should loosen. Wiggle it free as it tucks behind the main reflector. Detach the white trip with the amber reflector. Detach the reflector or tape over it. Or paint it haha. The fast dry is dry to touch after 15 minutes so I resprayed coats every 15 minutes. I did 4 coats. 6 Installing the Halo I decided to mount behind the shroud because I haven't seen anybody in my city do that and I like being different. Take your shroud that you have cut and painted. Line the ring up behind. I opted to use JB Steel Stik to secure the ring to the shroud. It's messy so use gloves. I used the Stik on 4 points to secure it. 2 is more than enough but I'm paranoid. 7 Putting Everything Together Begin by feeding all your wires through the bulb hole. Put the projector into the reflector and secure it snug. Put your shroud on the projector. Leave plenty of slack on the wires so you can pull the shroud off if you need to rotate alignment. Now is a good time to test the alignment of the lights. If all is good, permanently attach the shroud on the projector. I used a little bit of JB weld on the Shroud Centric Ring. It settles in 5 minutes. Tighten down the 27mm locking nut for the projector and replace the signal reflector and trim back in the lamp. Also you should notice that your projector came with 2 wires(red/black). Those are to activate the high beam solenoid. You should see your projector box came with a female plug for you to feed the wires through. This will need to be done to connect up to your harness. 8 Lense back on If you are reusing your old glue, reheat it either using the over for 5 minutes or use a heat gun. I used a heat gun. Place the lense back on the body and make sure every tab clicks. 9 Wire Up the Halos The halos have 2 wires. A red and black wire. I wired them to my drl bulb which is the smaller bulb that connects to the main reflector. Use wire taps, or directly connect/solder and electrical tape/heat shrink it so it is waterproof. It is very important that everything is water proof as our lamps see a lot of water back there due to our lack of seal on the hood. 10 Mount Lamps Back to Car Put the bulbs back on your headlight including your new H1 HID bulb and you can put your headlight back on the car. Bolt it back on. 11 Harness and HID Kit http://www.theretrofitsource.com/diy...ess-guide.html This harness is very easy to use as every wire is labelled to what connects to where. In case you need help, TRS put together a great PDF as well as video tutorial if you follow the link above. Heres where I mounted my ballast and Harness. I used 3M Double Sided tape. Passenger side Driver Side 12 Go For a Drive and Enjoy! My lenses are quite pitted. I'll be restoring them soon. Any questions feel free to message me. If this thread is in the wrong spot, mods please relocate it. Thanks.
__________________
|
01-24-2014, 10:54 AM | #2 |
Drives: Yaris Hatchback Join Date: Apr 2007
Location: Bville, TN
Posts: 212
|
defenitely want to do it myself now. Thanks for all the links and for the guide. Will come in handy if i decide to go with it.
|
01-24-2014, 11:04 AM | #3 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Nice job. I really like those shrouds, and particularly painted flat black.
__________________
|
01-24-2014, 02:25 PM | #4 |
Nice alignment..
|
|
01-24-2014, 02:23 PM | #5 |
toyota
Drives: 2007 Yaris RS Blazed Join Date: Oct 2006
Location: toronto, canada
Posts: 3,637
|
beauty.... apollo shroud is hot, same goes to gun gattling shroud ...good job bro.
__________________
If my calculations are correct, when this baby hits eighty-eight miles per hour... you're gonna see some serious shit!!!!!! "Horsepower is how fast you hit the object. Torque is how far you move that object.." |
01-24-2014, 02:58 PM | #6 |
Metsu
Drives: NCP91 ; E36 Join Date: Oct 2008
Location: Calgary
Posts: 154
|
Thanks for the kind words guys. Yeah the Gatling gun shroud is nice and requires no modifications to fit.
__________________
|
01-25-2014, 09:00 AM | #7 |
Great. Thanks for the post.
|
|
01-26-2014, 09:26 PM | #8 |
Absolutely love it. I want to do this for sure. I'm also in Canada. What was your total cost in purchasing all necessary products incl. shipping?
Also is there anything whatsoever that you would do differently as far as ordering different parts next time around at all? I want to do this myself in the Spring and otherwise will try and replicate what you have done, beautiful work. Thanks! |
|
01-28-2014, 07:10 PM | #9 |
Drives: Yaris SR '12 Join Date: Jan 2013
Location: London, UK
Posts: 156
|
Looks great. Really makes me want to try mine again. I blame my oven being too small so I couldn't even get the headlight apart. Anyways, great job man!
__________________
The forever growing to do / to buy list: FIX Projectors - FINALLY DONE! XB LED fogs - Done Lowering springs - Done MOMO Revenge Evo X - Currently selling body parts for Declare bankruptcy - Done |
01-29-2014, 05:35 PM | #10 |
Mr. 155 and climbing
Drives: Seriously Modded 07 Sedan Join Date: Jun 2006
Location: In The Hotbox
Posts: 4,742
|
Scott noted that the oven process can make your house quite stinky so be aware if you decide to try so it doesn't catch you off guard.
__________________
Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes. |
01-30-2014, 09:43 AM | #11 |
toyota
Drives: 2007 Yaris RS Blazed Join Date: Oct 2006
Location: toronto, canada
Posts: 3,637
|
i didnt get any weird odour during baking i did put it on 170 deg celcius which is the lowest my oven can do and left it there for 7 minutes which is enough to pry it off..
__________________
If my calculations are correct, when this baby hits eighty-eight miles per hour... you're gonna see some serious shit!!!!!! "Horsepower is how fast you hit the object. Torque is how far you move that object.." |
01-31-2014, 04:34 AM | #12 |
Drives: Decepticon - Ravage Join Date: Nov 2008
Location: San Francisco
Posts: 1,462
|
does your cutoff have any bending? or is it completely flat?
I read this article about fixing it. http://www.jvxdriver.com/Mini%20H1%2...mprovement.htm
__________________
Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274 |
02-04-2014, 05:24 PM | #13 | |||||
Metsu
Drives: NCP91 ; E36 Join Date: Oct 2008
Location: Calgary
Posts: 154
|
No problem!!
Quote:
Quote:
Quote:
Quote:
Quote:
__________________
|
|||||
02-06-2014, 10:55 PM | #14 |
Drives: Decepticon - Ravage Join Date: Nov 2008
Location: San Francisco
Posts: 1,462
|
I like the foreground limiter, nice to see no glare off of ground and good distant lighting. I like the latest mini H1, but maybe the new D2S 3.0 will be better, but good to know the mini H1 6.0 doesnt require any cutting at all.
__________________
Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274 |
03-03-2014, 02:32 PM | #15 |
Drives: Betsy - 07 Yaris HB Join Date: Sep 2011
Location: San Francisco, CA
Posts: 98
|
Is it really necessary to paint the housing black? I kinda wanna keep the oem looks..
__________________
WILDY imaginative WONDERFULLY expressive |
05-06-2014, 05:56 AM | #16 |
Hello
Just a couple questions in regards to the kit that you linked in the beginning. I'm strongly considering ordering this kit so that I can do the same retrofit. In regards to the shrouds, is it suggested to get the 'Mini Gatling Gun' shrouds that are included, or best to upgrade to the 'Apollo 2.0 Flat', 'Apollo 2.0 Full Circle', or 'Apollo 3.0' for the additional $25.00 -- and if so, which of the 3 works best. Also, for the ballast. You mentioned issues with the included Morimoto, so is it also strongly suggested to pay the additional $90.00 to get the 'Denso Slim' ballasts. This is a bit of a pricey upgrade but if issues with the other, well worth it. Finally, these centric rings you linked earlier, do not appear to be included in the kit. Are these something that need to be ordered additionally from the website at the same time? Cheers. Last edited by white_rice; 05-07-2014 at 02:29 PM. |
|
05-11-2014, 01:00 AM | #17 | |
Quote:
|
||
05-11-2014, 09:10 AM | #18 |
toyota
Drives: 2007 Yaris RS Blazed Join Date: Oct 2006
Location: toronto, canada
Posts: 3,637
|
Rings should come with the shroud.. Mini and regular fits on hatch but sedan I believe had to be mini...
__________________
If my calculations are correct, when this baby hits eighty-eight miles per hour... you're gonna see some serious shit!!!!!! "Horsepower is how fast you hit the object. Torque is how far you move that object.." |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY (08' USDM LB): Interior Light Color Change | revnull | DIY / Maintenance / Service | 37 | 05-21-2016 12:59 PM |
Free Projectors or LED tails for 1 Yaris 4d + 1 Yaris 2d in SoCal | V70R_Blackbrick | Cosmetic Modifications (Exterior/Interior) | 26 | 11-27-2013 10:14 PM |
DIY: Yaris LB Halo Led Projector Headlights | goku87 | DIY / Maintenance / Service | 37 | 11-15-2013 06:23 AM |
DIY: Adding LED turn arrows to side mirrors | my2sense | DIY / Maintenance / Service | 10 | 05-28-2012 02:16 AM |
DIY LED Strip under the door panel | charleschia1986 | DIY / Maintenance / Service | 19 | 11-05-2011 07:49 PM |