advice on lowering - Toyota Yaris Forums

adam786 · 06-12-2007, 11:32 AM

i am about to lower my yaris , i am in south africa so unfortunately we don't have tanabe so i am going with the eibach pro-kit , my only concern is will my ride be very hard or different to the stock drive, cos in south africa our road quality isnt too good

nsmitchell · 06-12-2007, 04:27 PM

I'm using the Megan springs and my front tires rub sometimes. Some hard bumps hit really hard!

churp · 06-12-2007, 06:46 PM

Quote:

Originally Posted by nsmitchell

I'm using the Megan springs and my front tires rub sometimes. Some hard bumps hit really hard!

Shouldn't have cut the bumpstops! Mine Megans have never bottomed.

MrJester · 06-12-2007, 05:07 PM

Lowering will give you a rougher ride. So keep that in mind. I like the look better so the ride quality really doesn't bother me.

TOOL · 06-12-2007, 05:26 PM

What about bottoming out on speed bumps? Is it bad?

MrJester · 06-12-2007, 05:53 PM

I have the NFs and 17s on mine and I don't notice much bottoming out unless its a pretty heavy bump.

Pars · 06-12-2007, 06:13 PM

I had pro-kit on my last car (civic) and I'd highly recommend those springs for street use. When I finally get around to putting springs on my Yaris, I'll pick the cheaper of the two, Tanbe vs Pro-Kit.

06-12-2007, 11:32 AM	#1
adam786 View User's Garage Drives: yaris 4 dr spirit silver lift Join Date: Jun 2007 Location: south africa Posts: 7	advice on lowering i am about to lower my yaris , i am in south africa so unfortunately we don't have tanabe so i am going with the eibach pro-kit , my only concern is will my ride be very hard or different to the stock drive, cos in south africa our road quality isnt too good

06-12-2007, 04:27 PM	#2
nsmitchell View User's Garage Drives: LB-Auto-PWR-ABS-Cruise-Springs Join Date: Aug 2006 Location: Richmond, VA Posts: 1,065	I'm using the Megan springs and my front tires rub sometimes. Some hard bumps hit really hard! __________________ Other car is a 2005 Mustang Convertible 4.0L V6 Manual - Legend Lime Get YarAss in gear! RIP - Casey Tatum

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
tanabe nf210 vs. TRD lowering springs??	static808	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	37	01-24-2012 12:00 AM
Lowering Springs - Questions ~	jaspie	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	16	01-10-2007 09:21 AM
TRD lowering springs' and/or shocks' Ride Quality??	static808	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	28	08-29-2006 01:42 PM
Will putting new lowering springs damage original shock absorbers in the long run?	Joel Leong	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	20	06-07-2006 09:30 AM
Factory Lowering Springs + MAX Wheels? What are the options?	bigsky2	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	4	05-24-2006 09:10 PM

06-12-2007, 05:07 PM	#4
MrJester View User's Garage Drives: homo Join Date: Feb 2007 Location: Homo Posts: 149	Lowering will give you a rougher ride. So keep that in mind. I like the look better so the ride quality really doesn't bother me.

06-12-2007, 05:26 PM	#5
TOOL I <3 Cars! View User's Garage Drives: Honda Fit S Join Date: May 2007 Location: Nor Cal Posts: 40	What about bottoming out on speed bumps? Is it bad?

06-12-2007, 05:53 PM	#6
MrJester View User's Garage Drives: homo Join Date: Feb 2007 Location: Homo Posts: 149	I have the NFs and 17s on mine and I don't notice much bottoming out unless its a pretty heavy bump.

06-12-2007, 06:13 PM	#7
Pars Drives: 07 Yaris Liftback Join Date: Aug 2006 Location: Toronto Posts: 418	I had pro-kit on my last car (civic) and I'd highly recommend those springs for street use. When I finally get around to putting springs on my Yaris, I'll pick the cheaper of the two, Tanbe vs Pro-Kit.