source for intake coupling rubber boot. - Toyota Yaris Forums

andruboz · 01-22-2009, 11:03 PM

My Injen cai came in with the proper rubber coupling for a yaris (2.25"). problem is i'm putting the corolla/matrix throttle body on and the injen boot doesn't stretch. (2.5")

found one at the hardware store but its neoprene rubber- made for drain plumbing. not sure if its designed to take the heat.

All the autoparts stores only have super thick cheezy boots in 3" or 3" to 2.5" reduction.

I found the exact injen boot i need x-3048. summit sells them but they are out of stock until the first week of feb.

somebody have a source for intake couplings? it would suck to wait till feb.

turboyaris · 01-22-2009, 11:43 PM

http://www.hosetechniques.com/produc...oducts_id=2795

saplaymate · 01-23-2009, 12:30 AM

http://www.siliconeintakes.com/

bzinn 1 · 01-23-2009, 03:56 AM

either one of the two listed has great products for fairly cheap.

thebarber · 01-23-2009, 07:48 AM

neverenoughauto.com.....yw vendour where i got my vibrant 4ply coupling....a bit more expensive, but really good and will last a lonnnng time

at3GG · 01-23-2009, 04:30 PM

PEPBOYS!

01-22-2009, 11:03 PM	#1
andruboz boohachimono Drives: 07 hb Join Date: Oct 2008 Location: central texas Posts: 97	source for intake coupling rubber boot. My Injen cai came in with the proper rubber coupling for a yaris (2.25"). problem is i'm putting the corolla/matrix throttle body on and the injen boot doesn't stretch. (2.5") found one at the hardware store but its neoprene rubber- made for drain plumbing. not sure if its designed to take the heat. All the autoparts stores only have super thick cheezy boots in 3" or 3" to 2.5" reduction. I found the exact injen boot i need x-3048. summit sells them but they are out of stock until the first week of feb. somebody have a source for intake couplings? it would suck to wait till feb.

01-23-2009, 12:30 AM	#3
saplaymate Drives: 08' HB Join Date: Oct 2008 Location: SATX Posts: 117	http://www.siliconeintakes.com/ __________________ 0 - 60 in 3 shifts

01-23-2009, 07:48 AM	#5
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	neverenoughauto.com.....yw vendour where i got my vibrant 4ply coupling....a bit more expensive, but really good and will last a lonnnng time __________________

01-23-2009, 04:30 PM	#6
at3GG Drives: 07 metmet LB Join Date: Oct 2008 Location: VA Beach Posts: 648	PEPBOYS! __________________ F5 CAI, MR axleback, MR Header, NST SSK. Full Exhaust wrap, AT3 Custom SSK Konig Heliums 15x6.5 Black Tanabe Df210's

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-22-2009, 11:43 PM	#2
turboyaris Drives: 2007 Yaris Sedan Join Date: Jan 2007 Location: Southern New Jersey Posts: 459	http://www.hosetechniques.com/produc...oducts_id=2795

01-23-2009, 03:56 AM	#4
bzinn 1 Drives: 2008 Yaris HB Join Date: Oct 2008 Location: University Place,WA Posts: 828	either one of the two listed has great products for fairly cheap.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Shift Boot ... revisited	bigsky2	Cosmetic Modifications (Exterior/Interior)	35	04-19-2007 08:04 AM