Induction kit running issue - Page 2 - Toyota Yaris Forums

WeeYari · 01-10-2013, 12:52 PM

^ yes, it is homemade.

cali yaris · 01-10-2013, 12:54 PM

Oh.

Bluevitz-rs · 01-10-2013, 01:40 PM

^^^

Quote:

Originally Posted by discomark10

I fabricated it myself as they cost the equivalent of around $250 here...

I'm going to have to either fix or remake it, if resetting the ECU reset fails.
It only cost about $15 to make out of stainless, so a bit cheaper!

tooter · 01-10-2013, 02:04 PM

Quote:

Originally Posted by discomark10

I fabricated it myself as they cost the equivalent of around $250 here...

I'm going to have to either fix or remake it, if resetting the ECU reset fails.
It only cost about $15 to make out of stainless, so a bit cheaper!

Hey disco, can you post a pic of your intake? Maybe if we can see it, we can help you figure out how to make it work.

I admire that you're adventurous enough to try to make one up. I just measured the outside diameter of the two intakes I have:

Weapon R 57mm
Simota 59.5mm

Both work fine, and the difference might be the wall thickness of the tubing. I'll need to disassemble them to get the more accurate inside measurements. How your MAF sensor is positioned relative to the center of the tubing is important. Maybe spacing it up or down will help. I'm taking the intakes apart today to get a better fit on the throttle body so I'll take some measurments and let you know.

Greg

WeeYari · 01-10-2013, 02:22 PM

The ID of my PRM Jetstream intake is 2.25".

discomark10 · 01-10-2013, 04:22 PM

Quote:

Originally Posted by tooter

Hey disco, can you post a pic of your intake? Maybe if we can see it, we can help you figure out how to make it work.

I admire that you're adventurous enough to try to make one up.
Greg

I wont be able to get a pic until Sunday or Tuesday now as im back on shift :(
But it looks allmost identical to this http://www.ebay.com/itm/400295390141...=38634&vxp=mtr
(yay for google!)

Quote:

Originally Posted by tooter

How your MAF sensor is positioned relative to the center of the tubing is important. Maybe spacing it up or down will help. I'm taking the intakes apart today to get a better fit on the throttle body so I'll take some measurments and let you know.

Greg

As for positioning, I'm pretty sure it was well centred, if I remake one ill make sure its positioned as good as I can.

Quote:

Originally Posted by tooter

I just measured the outside diameter of the two intakes I have:
Weapon R 57mm
Simota 59.5mm

Quote:

Originally Posted by WeeYari

The ID of my PRM Jetstream intake is 2.25".

Awesome thanks, is it the same size tubing for the bit you measured all the way along the length?

WeeYari · 01-10-2013, 04:27 PM

Quote:

Originally Posted by discomark10

Awesome thanks, is it the same size tubing for the bit you measured all the way along the length?

Yes.

discomark10 · 01-10-2013, 05:42 PM

I think this should do the job.. http://pages.ebay.com/link/?nav=item...d=280776018618

01-10-2013, 12:52 PM	#19
WeeYari View User's Garage Drives: 06 5dr LE (deceased), 13 Soul Join Date: Oct 2008 Location: Georgetown, Ontario, Canada Posts: 5,814	^ yes, it is homemade. __________________

01-10-2013, 12:54 PM	#20
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	Oh. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

01-10-2013, 02:22 PM	#23
WeeYari View User's Garage Drives: 06 5dr LE (deceased), 13 Soul Join Date: Oct 2008 Location: Georgetown, Ontario, Canada Posts: 5,814	The ID of my PRM Jetstream intake is 2.25". __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB Forced Induction kit	JohninVT	Willing to Buy by private party	5	11-12-2012 04:24 PM
how to fit induction kit to my p1	daveyboigt	Performance Modifications	0	10-21-2012 06:06 PM
Induction air filter on yaris diesel - good or bad?!?!	Ziishan	DIY / Maintenance / Service	3	10-20-2012 09:43 AM
VIS jdm rs body kit	Dperry	Cosmetic Modifications (Exterior/Interior)	2	05-07-2012 12:00 AM
Greddy xB kit vs Greddy Fit kit	ellenbetty	Forced Induction Forum	52	09-29-2009 09:42 PM

01-10-2013, 05:42 PM	#26
discomark10 Drives: 02 Yaris 1.5 T-sport Join Date: Dec 2012 Location: Bucks Posts: 30	I think this should do the job.. http://pages.ebay.com/link/?nav=item...d=280776018618