PCV VALVE ON 1.0 TOYOTA YARIS 2008

[Bazilwasp1970]

Can anyone assist in locating the PCV VALVE for my Toyota yarris 1.0 2008 . A image of where it is would be appreciated.

[castles]

PCV valve:

https://www.youtube.com/watch?v=VikC_7NlIy8

[NYC-SE]

Originally Posted by castles

PCV valve:

https://www.youtube.com/watch?v=VikC_7NlIy8

That's an NZ not a KR engine.

[NYC-SE]

I can't cut from this doc. But if you follow this link there is a diagram on page 89 showing the location on a 1KR-FE:

http://webpages.charter.net/scott.mc...%20Control.pdf

[zoidberg444]

Back of the engine behind where the oil cap is there is a hose that goes in. Take the hose off. It goes into the PCV valve. I take mine off and squirt some carb cleaner through it every time I change the oil.

[esse10]

I don't believe you need to clean it every oil change, once every 6 months should be sufficient IMO. It's just a block valve that works with positive pressure, if it raddles when you shake it than it's good to go.

[drusoider]

Originally Posted by zoidberg444

Back of the engine behind where the oil cap is there is a hose that goes in. Take the hose off. It goes into the PCV valve. I take mine off and squirt some carb cleaner through it every time I change the oil.

Hello. Where did you bought the pcv valve. Any link please?

Sent from my MI MAX 2 using Tapatalk

[komichal]

Originally Posted by esse10

I don't believe you need to clean it every oil change, once every 6 months should be sufficient IMO. It's just a block valve that works with positive pressure, if it raddles when you shake it than it's good to go.

How often do you change oil? I do it every 8,000 km (approx. 6 months) and I think I am a freak. Your post suggests that you change oil even more often...?