PETERPOOP's Turbo Build Thread. - Toyota Yaris Forums

PETERPOOP · 11-18-2010, 12:28 AM

Thanks for the info. Still not 100% sure which is best. Got to look into it more. But one thing I did decide to do, was to put a 90 coming through the bulk head, aiming down, rather than shooting straight across. After seeing the video (thanks cydgdgdgege) and seeing how strong the oil streams out, I didn't want it shooting onto the crank; and tamago's idea about putting the 90 made a lot of sense to me too. But I'm not too sure yet if I do want to extend it into the oil or not; still researching...

This is what I got so far:

Like tamago suggested, I could put this fitting on so the oil will return below the oil line.

This is with the 3/8" fitting on the outside..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zage Turbo Kit Install - Toyota Yaris	Focus_Sh1ft	Forced Induction Forum	160	02-06-2022 08:14 PM
Scion XB 1NZ-FE Turbo build	xbgod	Forced Induction Forum	417	07-24-2011 09:16 PM
XBG's Total Build and Update Thread	xbgod	Performance Modifications	10	11-18-2010 11:19 PM
Whats needed to turbo charge the yaris?	Arkhangel	Forced Induction Forum	44	03-02-2009 10:08 PM

11-18-2010, 12:28 AM	#11
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	Thanks for the info. Still not 100% sure which is best. Got to look into it more. But one thing I did decide to do, was to put a 90 coming through the bulk head, aiming down, rather than shooting straight across. After seeing the video (thanks cydgdgdgege) and seeing how strong the oil streams out, I didn't want it shooting onto the crank; and tamago's idea about putting the 90 made a lot of sense to me too. But I'm not too sure yet if I do want to extend it into the oil or not; still researching... This is what I got so far: Like tamago suggested, I could put this fitting on so the oil will return below the oil line. This is with the 3/8" fitting on the outside..