![]() |
|
|
|
#4 | |
![]() ![]() ![]() ![]() ![]() Drives: 2015 H Production Yaris Join Date: Oct 2009
Location: Debary, FL
Posts: 1,953
|
Quote:
As far as rubbing, hard to say for sure. Looks like you picked a conservative offset wheel, so that helps. The Dunlop is a bit shorter at 23.8" VS 24.2 for the Yokohama, so that helps a little. Also section width (overall size, not the tread) is very close, the AD08 is rated at 8.2" wide on a 7" wheel. The Z1 is rated at 8.7" on a 7.5" wide wheel, so putting it on a 7" wheel should bring it's width down around 8.4-8.5" - for every 1" of wheel width change the section width of the tire will change .5", so the 1/2" smaller wheel will narrow up the sidewall of the Dunlop just a bit.
__________________
2005-2008 SCCA Solo BS National Champion 2017-2018 SCCA H Prod National Champion
|
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Official YARIS Wheel & Tire Guide | Black Yaris | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 403 | 08-10-2025 12:20 AM |
| tire noob question..what's the widest tire size can run on stock 15"s? | detroiter | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 22 | 12-06-2011 10:44 AM |
| NITROGEN GAS TIRE FILL: WORTH IT? | EjDaPogi | Middle East | 15 | 03-20-2011 03:06 AM |
| My Wheel and Tire ideas | why? | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 25 | 01-26-2009 10:30 AM |
| forged rims Vs. alloys | red-jdm | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 14 | 07-23-2007 09:30 PM |