Hi, everyone!! Long time, no chat! 2007 Liftback Help Appreciated

[TRD_Yaris]

While I wait patiently for the final parts to complete this project, please help me confirm the wiring. And btw, the reason I thought I was supposed to use pin 7 is because of the Micro Image Aftermarket Foglight Switch Diagram:

"6. Connect the modified aftermarket switch. You can choose to have the fogs only come on
with the low beams (OEM method).
a. For the fogs to only turn on with the low beams connect the outside red wire to pin 3
and the green wire next to it to pin 4 of Connector D4, which is the headlight stalk
connector
b. For the fogs to turn on with the parking lights, low beams or high beams connect the
outside red wire to pin 3 and the green wire next to it to pin 13 of Connector D4,
which is the headlight stalk connector
c. For the fogs to turn on anytime, even with the ignition off connect the outside red
wire to pin 3 and the green wire next to it to pin 7 of Connector D4, which is the
headlight stalk connector"



Blue - Ground (for on/off switch)
------
Red- into D4 Pin 3
Black- Ground (foglights will work anytime, key in ignition or not)


I might end up cutting this harness up. I plan on putting the switch near the light stalk, so I won't need the length supplied to get to the OEM location near the e-brake lever. Plus, if I understand correctly, I don't need this cheap relay, anyway. (???)

BTW, I presume this uses the an OEM 15A fuse. Besides checking to confirm that I've got one according to the .pdf diagrams, does this mean I don't have to worry about installing an additional fuse? Someone on another thread was claiming that they had fried their relay and was worried that their eBay kit didn't have a fuse (I'm pretty certain he wasn't going through the Toyota OEM relay)

Thanks again!