The brake story: frequent disk warpage

[Lux]

Originally Posted by enviri

The rear axle certainly looks very similar for the ncp131 to the ncp91..the chassis mount may be slightly different though. The ncp91 complete rear disc set can be had for about 700-900USD shipped from JP (DHL). You can certainly install the whole ncp131 rear disc on your existing rear axle but a custom mount must be made for the caliper, behind the hubs. You will need ncp131 rear discs/caliper (09 corolla xrs calipers have been reported to work also..dont take my word for it) and ncp131 ebrake cable, since the ebrake is direct caliper to rotor...no drums.

Mate, THIS is the raw technical information that I was looking for... no drivel about wheel torque or braking technique. Thank you so much for this. A diamond geezer, you are, truly.

Indeed, the mounting location for the rear calipers are different for our drum-type axle, which is why I'm inclined to swap the complete axle assembly-- for direct fit and OEM quality. Going back to my first post: "quality and reliability are absolute; nothing else matters."

Would you reckon anybody here would know the technical details regarding NCP91 vs. NCP131 torsion beam axle mount geometry? I personally don't suspect them being different, but anything could have changed year-over-year thanks to NCAP and NHTSA. Also, where did you find your NCP91 rear axle?

I reckon that your current brake configuration is the dog's bollocks; quite impressive. Do you have pictures? How is the stopping power and bite consistency after abuse?