Group Buy - True Double Din Radio Trim for Liftbacks (180mm opening) - Toyota Yaris Forums

CTScott · 05-13-2009, 04:31 PM

I just popped mine off to take some measurements. My Eclipse AVN2210p (which is actually the radio that Toyota made this piece because of) has a wider trim ring, which is about 1" in from the face. You can see it in the picture below. The wider ring is 179mm x 97mm. The narrower section is 170mm x 94mm.

The new trim piece's opening is 174mm x 100mm (6 7/8" x 3 15/16"). This is 6mm narrower than Double DIN spec, which probably explains why some HU's fit without a problem and others don't.

Also, the lip of the new trim piece extends 10mm deeper than the original did (see the pic below).

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dash destroyed in electrical fire.	purpleminx	General Yaris / Vitz Discussion	79	06-12-2009 03:53 PM
[Recovered] Group Buy for Australia #1 (Badges)	harveyjai	Australia	9	12-13-2008 03:59 PM

05-13-2009, 04:31 PM	#11
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,450	I just popped mine off to take some measurements. My Eclipse AVN2210p (which is actually the radio that Toyota made this piece because of) has a wider trim ring, which is about 1" in from the face. You can see it in the picture below. The wider ring is 179mm x 97mm. The narrower section is 170mm x 94mm. The new trim piece's opening is 174mm x 100mm (6 7/8" x 3 15/16"). This is 6mm narrower than Double DIN spec, which probably explains why some HU's fit without a problem and others don't. Also, the lip of the new trim piece extends 10mm deeper than the original did (see the pic below).