Viper Alarm wiring help

[Taiyaki]

Ok so I have the A1 MES power door locks, and it seems to only have two wires (one to lock and one to unlock)
I currently have a Clifford alarm wired. The main harness from the clifford is the same as the viper but the Clifford door lock has two wires but the Viper has 7.

-Black/White: Dome light supervison input #87
-White/black: Lock #87a normally closed
-Green/black: Lock #30 common (output)
-Violet/black: lock #87 normally open (input)
-brownblack- unlock #87a normally closed
-Blue/Black: Unlock #30 common (output)
-Violet: Unlock #87 normally open (input)

How would I hook up the lock and unlock to my A1 MES power locks?

Also it says on the A1 MES kit to make sure that the wires must have a negative lock and unlock output pluses. Positive pluses will damage it

another question, I will only need the door lock harness and primay harness right? and of course the valet button, antenna, and LED.
I wont be needing the Immobilizer, or auxiliary right?