DIY - 2009 Cruise Control for $10, without pulling the steering wheel and airbag

[bronsin]

Originally Posted by CTScott

The current draw in negligible, so any switch will work. Fitting four of the ones I used is tricky. I drew it up in CAD and found that I only had a margin of about 1/8" for the four switches to fit through the hole behind the trim piece. One thing I just realized that I didn't check how much that hole can be widened.

The hole can be widened A LOT, maybe half an inch on the radius. The catch is the plastic material is like an inch thick. It would make a huge mess to remove it.

PS the switch Im thinking of using is Digikey EG2021-ND.