Add remote to factory keyless.

[hayduke]

Can anyone confirm that I could buy this key:

https://www.ikeyless.com/vehicles/to...20?shoppingcom

And follow the directions (bellow) to enable remote entry? I know I'd need to get the key cut, but I expect a locksmith will do that for the usual fee.

Also, I'm pretty sure my car has the factory remote entry system installed, but they wanted $250 for the key when I bought car used. They had a different "dongle" that they used on the lot to lock/unlock the doors. Make sense?

Originally Posted by imknotright

My 07 Yaris Sedan with factory keyless only came with one remote key (Which seems to be normal). I wasn't going to pay the $200 plus dollars for one from the dealer. I found one on ebay for under $100 (MAKE SURE THE FCC ID INSIDE MATCHES YOUR CURRENT REMOTE) . I got it cut & then programed it myself. For factory keyless remotes I used instructions for Toyota TSB EL004-01.

1- Driveres door open & unlocked. Key out of ignition

2- Insert & remove key 2 times within 5 seconds

3- Close & open drivers door twice within 40 seconds

4- Insert key into ignition & remove

5- Close & open drivers door twice within 40 seconds

6- Insert key into ignition

7- Close the door

8- Turn ignition switch from "LOCK" to "ON" & back to "LOCK"

- ONCE for ADD mode

- TWICE for REWRITE mode

9- Remove the key from ignition

10- To confirm your mode selection, the power locks will now cycle "lock" to "unlock" a

number of times corresponding to your key cycles in step 8

11- Within 40 seconds of confirmation

- Press both transmitter Lock & Ulock buttons simultaneously

- Within 3 seconds press transmitter Lock button for more than 1 second

- If successful, the power locks will cycle once (twice indicates transmitter problems)

- Repeat step 11 for additional remotes

12- Open door to exit programing