Stay tuned

[Jason@SportsCar]

Originally Posted by Blown_xa

What pads do use for the track? I run into brake fade issues after just a few laps on Hawk hp+. What our your current spring rates? I bumped up my front rates after removing sway and fight instability during high speed braking , but it rotates fine eveywhere else now.

We are currently using Carbotech XP10 in the front, with stock shoes in the rear. Zero fade, and we have been using this same set pretty much since we built the car - we tried a few other sets at some test days, but ended up going back to the XP10 for all of the races.
I am not a big fan of Carbotech (long story), so I have been trying to get our friends at Hawk to build Yaris pads. So far no luck, but if the B-Spec class generates enough interest we might be able to convince them.

Current rates are 550lbs front, 650lbs rear. Using the smaller sedan front bar, this is a recent change, and it made a big difference from the center of the turn out. No rear bar.