DIY: 2012 Radio Removal

[vrwm]

Tools Needed:
1.Kung Fu Grip
2.8mm Socket, Extension, and Ratchet(I Used 8mm Screw Driver)
or Philips #2 Screw driver

Step 1.
Starting on the right side of vehicle(Passenger side USDM) pull the surround panel using your kung fu grip by the a/c vent. It is held in by clips all the way around. After you loosen the first clip just pull gently all the way around.


Step 2.
Pull the surround out around the radio. Held in by clips similar to the dash panel.


Step 3. (Optional)
Remove the connector for Hazard Switch. (I left it connected and let it hang)


Step 4.
Unscrew the Radio using your tool of choice.(Yellow dots, 2 screws on each side)



Step 5.
Pull the radio out and remove connectors.