|
07-04-2012, 02:47 AM | #23 |
I did some research on the 2012 NCP131 yaris, and there is a difference in part number for the fender liners on the G's/RS/SE vs BASE L/LE, BUT the difference is minor. The overall shape of the fender and the clip mounting spots look the exact same, but there is extra support for the G's/RS/SE bumper shown on the pic below circled in red.
BASE LINER: 53876‑52290+53875‑52290 RS/SE LINER: 53805‑52080+53806‑52070/53875‑52330+53876‑52320 Gazoo racing G's LINER: 53875‑WY010+53876‑WY010 would the bumper swap work without changing the fender liners? 99% sure yes. If you like to have the extra support of the liners, or the liners don't reach the holes of the new bumper, you can make a new hole in the very thin fender liner and zip-tie, like kioshi recommended, or just leave it alone. Some other people just toss out the fender liner all together and slam the car with low offset rims to not deal with rubbing :) Last edited by enviri; 07-04-2012 at 02:56 AM. Reason: added part# |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Yaris Motor Swap Thread *Read before posting swap threads* | Sabretooth | Performance Modifications | 218 | 02-19-2024 09:04 PM |
Radio swap from 2012 LE/SE into a 'L' | richard_rsp | In Car Entertainment + Electronics (audio / video / alarm) | 28 | 02-18-2014 11:20 AM |
DIY: 2012 Front Bumper Removal | vrwm | Third Gen Yaris General Discussion | 15 | 07-19-2013 05:23 AM |
2012 Bumper Removal | carolinablue | Third Gen Yaris General Discussion | 5 | 04-01-2012 07:25 AM |
First Drive: 2012 Ford Focus | Kal-El | Off-topic / Other Cars / Everything else Discussions | 18 | 02-25-2011 05:41 PM |