![]() |
|
|
|
#17 | ||
![]() Drives: 07 Yaris LB Join Date: Mar 2007
Location: Virginia
Posts: 10
|
Quote:
Quote:
*Removing a few pieces including the passenger glove box and driver side plastics. *Temporarily removing the daylight running light relay. *Unplugging/plugging different plugs to run alarm harness inline. *Removing pins (three I believe) from factory harness and swapping them with pins from alarm harness (jeweler's screwdriver all that was needed to release the pins). *Running piezo buzzer into the engine compartment...a factory plug is removed from firewall and replaced with a new one included with alarm kit. *Pop led/glass break sensor into console panel (by aux plug). *Mounting alarm brain to passenger side behind glove box. *Zip-tie cables up neatly *Test. *Reinstall removed plastics and glove box. The Toyota instruction sheet was extremely helpful. The drawings made finding everything very easy. My Yaris is a commuter to/from work (consultant...lots of road time). My accessories are all removable or small enought to put in the glove box (gps, ipod, etc...). The alarm has basic functionality (as compared to DEI, Viper, etc...), but is more than I was looking for...and my doors/hatch unlock without a key :). |
||
|
|
|
|
|