Speaker Size?? - Toyota Yaris Forums

mikeukrainetz · 05-25-2006, 04:04 PM

I installed a Volfenhag sub / amp system in my hatch, not the most high quality stuff but what the heck. I built the box myself and ran all the electrical myself. From what I understand I cannot add anything else without first going to a larger alt. The power wire is 4 guage and run through the firewall just left of the heater core inlet above the gas pedal, down along the driver side under all the plastic into the tire well and up through the lift handle on the stock tire cover - didnt have to cut anything other than the hole through the firewall.

See pics at http://www.cardomain.com/ride/2336679 or message if you have any questions or want any more photos. The only pain was seting up the power wire at the battery terminal - theres little room for the inline fuse block.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
When will the Yaris hit the showrooms at dealers?	Petrolhead	New YARIS Purchase Forum	181	11-28-2011 08:03 AM
Lets talk wheels	birdy	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	80	04-29-2006 02:13 AM
custom speaker in the deck box?	twixt	In Car Entertainment + Electronics (audio / video / alarm)	12	04-06-2006 08:40 AM
Yaris Speaker Sizes	Sp33dY	In Car Entertainment + Electronics (audio / video / alarm)	4	03-18-2006 10:11 PM
Vitz＆Yaris Custom Information	Kenbow	Photo-Video-Media Gallery	24	03-14-2006 01:23 AM

05-25-2006, 04:04 PM	#19
mikeukrainetz View User's Garage Drives: 2006 Toyota Yaris Join Date: May 2006 Location: Canada Posts: 564	I installed a Volfenhag sub / amp system in my hatch, not the most high quality stuff but what the heck. I built the box myself and ran all the electrical myself. From what I understand I cannot add anything else without first going to a larger alt. The power wire is 4 guage and run through the firewall just left of the heater core inlet above the gas pedal, down along the driver side under all the plastic into the tire well and up through the lift handle on the stock tire cover - didnt have to cut anything other than the hole through the firewall. See pics at http://www.cardomain.com/ride/2336679 or message if you have any questions or want any more photos. The only pain was seting up the power wire at the battery terminal - theres little room for the inline fuse block.